shop

A few of you may remember this thread Price Check, Metal Building - https://forum.ih8mud.com/threads/price-check-metal-building.1250548/ I started a few years back. Due to delays, redesigns, and issues with the first metal building company, we are just now breaking ground on the workshop...

Can anyone reccomend a shop that could install the KP Offroad cam/cam tab upgrade kit for my 4runner and do an alignment, that won't cost a kidney? I reached out to one shop who quoted me $1200. I may be wrong but that sounds really high to me. They had also quoted me roughly $600 to weld on...

I doubt many LC owners in the City, but does anyone has a recommendation for a quality body shop in SF? TIA

Does anyone have a recommended shop to install aftermarket rear coil springs on a 2004 GX? My daughter is there and her air springs have given out. Just need stock ride height and ride comfort as it is mainly an on road cruiser. Thanks for your help

Hey all, can anyone recommend a body shop? The closer to downtown Seattle the better, but I don't mind as far as Bellevue. Got into a fender bender and want to make sure it's done well. '19 LX. Thanks!

Hey All, I typically do all my own work on my trucks but I'm running into a transmission issue and that's beyond my scope. Does anyone know of a shop in the Metro Detroit / Ann Arbor areas that services 80series trucks? Or any recommendations on transmission shops in the area that will look...

Can anyone recommend a good shop in the New England area for rebuild my diesel injectors? 1975 H diesel...

Hey guys, I tried searching and was unsuccessful. Can anyone recommend a shop in the Houston area for a 94 4 runner swap to a 3.4? My buddy already has a JDM 3.4 sitting in his garage. If not Houston, anywhere in Texas or Louisiana? Thanks. Matt

All, Since I’ve crossed 120k on the 200, I thought I would see what Indy shops are good in the area. I’ve just been using the dealer for small things I don’t want to do, and to stamp the book so to say. I generally do most of the required maintenance myself. Thanks

So I have a 2000 toyota tundra with very mushy brakes. It all started with an intermittent braking issue where the brake pedal would be hard to press then it would go fairly soft. I have swapped the brake booster with 3 different after market units and the brake master cylinder with 2...

Does anyone out there have a machine shop in Nashville or surrounding areas that they trust with a 2F? Thanks! Jason

Looking for a diesel shop in CO that can tune/time the fuel pump in an HDJ81 after a rebuild of fuel pump.

Looking for a body shop in the general Los Angeles area specializing in older Toyota LandCruisers. Have minor body damage in front end of vehicle, bumper, hood, fender on a 1985 FJ60. Any recommendations would be appreciated.

First day into paint shop

Sat my 99 suffered a big hit at a merge where another driver failed to yield. Not sure I'm on the right link however anyone have recommendations on what body repair shop to tow it to? I'm in Bethesda. thx in advance! Thanks in advance.

A friend's son needs some patching / repair done on the underside of a Scion XB: any suggestions in the Portsmouth area for a shop that might be able to do this work? The son bought the car in MA (where it had passed inspection allegedly), failed NH inspection. Thanks all!

Not sure if this is the right section, and probably a long shot, but does anyone have a shop recommendation near Pleasant Grove Utah? Buying a vehicle there and I live out of state and would like to get it inspected before I fly out and drive it 1,100 miles back home haha

IMOP it’s scammer, it’s like a computer generated scammer reply, way to fast to respond and odd times of the day. I am in the Atlantic time zone and he says they are in NM and ship to Canada all the time. As a matter of fact they have a place in Ontario Can and have what I need there. When I...

I wish I taken better “before” photos, but apparently @6545SWB has found his one true calling in sheet metal. Tough to tell from the pics, but that lip to the shifter cut-out was bent all to hell and back with many high and low spots in the surrounding metal. Mark “listened to the metal”...

I wish I taken better “before” photos, but apparently @6545SWB has found his one true calling in sheet metal. Tough to tell from the pics, but that lip to the shifter cut-out was bent all to hell and back with many high and low spots in the surrounding metal. Mark “listened to the metal”...