fj62

Good used 38mm vac controlled transfer case from a 88 Fj62. 210k. Ships from 32609. Case must be disassembled for removal/ shipping. $350. Buyer pays actual ups shipping or can provide a shipping label.

Complete minus power steering pump and bracket. (Sold) Includes engine harness. Dash harness and ecu also available. Buyer makes freight arrangements (uship) or local pickup 32609. $1000

My wife and I are by no means expert videographers, nor world traveled explorers. But we are inspired by them, and share the same desire to get outside, explore new places, and share our experiences with friends and family. Both of us are Toyota fanboys/girls respectively, having owned Pickups...

Good afternoon, I'm looking for an FJ62 frame. I'm located in San Diego but I'm open to getting one shipped from out of state.

Looking to purchase some oem 81-87 fj60 wheels. Looking for 5, but 4 will suffice. Interested in other 15" wheels if OEM style. Thanks

1988 Toyota Land Cruiser w/ NEW Chevy V8 See the Craigslist ad. Lots of photos. It has a new Chevy V8, all new mechanicals. The body is so-so, but not terrible, and the interior is serviceable. It's a great daily driver/trail truck that will provide many years of service. $16,500

Hello folks. I am NOT in the process of converting my transfer case from vacuum shift to manual... but I'm hoping that someone who HAS performed this mod still has the vacuum diaphragm sub-assembly laying around. I posted this in the WANTED section of the classifieds (here), but haven't had...

Selling ARB Dakar Bar off of my fj62 wagon. Winch compatible, indicator lights. All parts accounted for. Good condition, lightly used. Would rather not ship or travel. More pics available upon request. $600 obo. Located in Sacramento

Hi all, I'm looking for a set of front and rear mudflaps for my FJ62. Let me know if you have and are willing to sell. Thanks! Mike

Looking to purchase an automatic FJ with miles on the lower end, sub-200,000. Prefer white, tan, silver or warm grey. Original is fine but must be in really good condition, I am not looking for a project but not looking for an ICON rebuild either.

Hello, after first discovering that there was only one screw holding my throttle position sensor on, I adjusted it according to factory spec and put in a second screw. It idled at around 700-950 after that. (Used to sit at around 650). But I'm fairly certain I adjusted that correctly. Thought...

I replaced the upper thermostat housing in my FJ62 with an aftermarket housing and now am having an issue with the stock water temp switch leaking when engine gets up to temp. I read a few threads saying teflon tape is a no no, as the switch is grounded through the threads. Searching the stock...

Hello everyone, after looking around my engine bay I noticed the bottom screw of my tps was missing, And the top one was tightened down causing it to kind of lever outwards. So I tried to adjust it using a digital multimeter set to ohms. I used a 0.93 mm feeler gauge between the throttle stop...

Anyone have experience with this conversion? Just looking for solutions.

Hey Guys, I know there are lots of threads on replacing 62 transmissions...but I wanted to get more local feedback and advice from you all. This summer my transmission overheated several times, and then a few weeks ago it starting having trouble shifting up in gears. The guys at LCNW...

Hello, I'm having some problems with my fj62 transmission lately. It revs up high at shift points, and sometimes takes a while to shift into the appropriate gear. I've heard people say that the dipstick in this trans should be hot enough to almost burn you when you check it, but mine never gets...

Hello, I've been having cold starting problems with my Fj62 (3fe) for a while. I pulled the cold start injector the other day with the fuel line and plug still attached, and turned the key. Engine cranking but no fuel being sprayed. (Canadian winter with truck engine completely cold). So I tried...

fj 62 3rd owner 13,900 - remarkable condition for being 30 years old. It has never been restored. It is all original paint in interior. It has a new OME suspension lift 2.5 inches. Rides better then factory suspension. The dash cap needs replacing. They are 131 dollars. (Cruiser Corps) Driver...

looking for a 3f engine for my FJ62, wouldn’t be opposed to a 2F. Really want to get my cruiser back on the road so Please let me know what you have! I’m in north Texas and would prefer not to have to ship if possible. Willing to drive quite a ways though! Thanks!

I don’t have a lot of info on the history. I bought it from a Cruiser dealer here in OKC. It had 73k. miles. Needed some body work and looked like it had been sitting for a long time. Normal mechanical work done (new alternator, radiator, thermostat, water pump, exhaust and master cylinder). No...