electric

Hi all, While I've been doing oxy-acetylene welding for a while, I'm newer to MIG welding. Bought a relatively cheap Lincoln 125 last year from the Home Despot, expecting that I would be able to convert it to true MIG rather than the (what I now realize is messy crap) flux-core. I looked at the...

SOLD Locking Hub Adapters these allow you to replace your Toyota Electric Locking Hubs on a 70 series with Aisin or other manual hubs. The adapters are brand new and were never used and include gaskets, etc. SOLD

Gentleman.....of course I use that term loosely. I have searched quite a bit on here on electric fans, but am not finding the answer I am looking for. I have seen members post pictures of electric fans on the passenger side, mounted on the A/C condenser. I cant help but wonder how effective this...

Found answers in other forum area. Thanks!

I disabled the fan on my old Porsche 928 because it already had two electric fans from the factory. They only turned on when traveling slower than 45 mph. I liked them. Never had one cooling problem doing so. Reversible dual 12 1/8 inch X-Treme S-Blade electric fan with Variable Speed Controller

has any one looked into this type of system? https://www.hydrastarusa.com/pdfs/HydraStarSalesSheet.pdf $550-700 1000-1600psi 17.5 Amp electro hydraulic system for trailers. i'm thinking about converting a conventional rear disc with parking brake to my trailer. there are calipers out there...

I just wanted to get a new thread started regarding my current electric power steering build. First, Let me start by giving a HUGE THAANK YOU to KEN at Welcome to ePowerSteering.com He is setting me up with everything I need for the build. I will be sure to keep posted as we go. First of all...

Hello everyone, I have the Ford Contour fans mounted and wired up to a relay (so I have the power wire, ground, and acc. wire coming out of the relay). My problem is finding the best way to switch the fans on. The kit I bought came with a probe, but I have a brand new Champion all aluminum...

Is there anyone out there that has done EPS on an early fj40 column? I am wanting to procure a kit to do this on my 1972 fj40 but the only write ups I have seen have been on the later columns and am wondering if it is possible or not to get this done on an earlier column? Any links to threads or...

Hello, I just converted my 1991 LJ77 OEM electric hubs to manual AVM hubs from Euro4x4. The conversion mechanically went fine, but 4WD is not engaging (front drive shaft spins when hubs are locked). Prior to conversion the dash push button Hub Lock and 4WD buttons worked fine. Now the Hub...

Pair of electric mirrors $50 Prefer local pickup in Charlotte NC but will at cost

I have a new never used CJK Offroad Electric Locking Differential Harness with High Pinion plugs. I can give you a front or rear locker switch (I have one of each). The harness is 12' long. Price is $100 + shipping/PayPal fee. From CJK: No more cutting and splicing into the frame harness for...

Now every time I turn in on it starts great, but then 10 seconds later there is a clicking from the glovebox area and it turns off. I am stumped. I just had my glow plugs redone.... twice, because they kept burning out. So my mechanic put in a push button glow system that seemed to work...

It is an electrical part that is next to the fuse box FJ40 Does anyone know what it is for? Thanks

So the rig is running great...except for a loud popping noise coming from the fuse panel area. It happens when its cold and accelerating or if I hit the gas and open the throttle. Rig is a 10/75, desmogged and rebuilt motor. Electrical system is all stock but in good shape. The popping noise...

SOLD SOLD In preparation for our Darien Gap expedition, I am replacing the stock Toyota electric winch from my 1986 BJ74 LX with a new Warn 18,000 lb Series 18 Military winch. I am selling my stock electric 9,000 lb electric winch for $600.00 plus shipping. Local pickup is fine also. She...