dobinsons

TL;DR looking for reviews of people running the IMS shocks. How’s the ride, are you happy with them, do you wish you had gone with the MRA setup? I’m trying to decide between the Dobinsons IMS and MRA shocks. Im looking to improve the overall ride on these Colorado paved/unpaved roads. I’ve...

I have the C59-535 coils installed but gave me more lift than I was planning on. Would like to swap for the c59-559V if anyone is interested. Or purchase if anyone’s pulled any off. Located in Austin, TX.

The tires are 11 years old and suspension 18 years old. I'm FINALLY ready to pull the trigger and change out the suspension. I installed it myself but will be using a shop this time. Current OME kit said 2-1/2" lift and had the castor corrective bushings. A few years later I upgraded to 10.5 x...

First time trying to press ball joints (and 1st time doing a lift install this weekend). Was getting some pre-work in, attempting to press 555 ball joints I got from @cruiseroutfitters because my dobinsons were only available without ball joints or with moog’s from Exit Offroad. I have a...

Brand New unopened Dobinsons Front IFS Diff Drop Kit for Lexus GX470, Toyota Tacoma 4Runner and FJ Cruiser. Kit #: DD59-527K Keeps CV angles at a good working angle Allows for lifts over 2.0" Includes all necessary hardware, including machined spacers and nuts/bolts Compliments Dobinsons 3"...

Anyone else have troubles installing the Dobinsons Drawer system for a 2016 (+?) LC? It appears to be about 2 inches too wide at the wheel wells. I was very specific on the year/make/model when I ordered the drawers. I have reached out to the seller (ExitOffroad) for help but thought I would...

Dobinson's snorkel 100 series I like the look of the snorkel and how it does not have to run as far along the fender. Has anyone successfully installed this??

Brand new Dobinsons track bar for GX470 PR59-1423. Got another track bar with the purchase of my aftermarket axle. Can't use this with the bigger 3rd member on the New axle. Opened just to take picture. $275 + shipping

Need some help figuring out what to do next. FJ40 with 11/78 build date. Installing a Dobinsons full IMS kit. Passenger rear went together great. Driver side rear is presenting a challenge. The spring hanger pin flange screw holes do not line up with hanger bracket. I tried the 3...

Used these for about 1.5 years, just replaced the suspension as a kit so I ended up with an extra set. Everything works fine and the hardware is all there. I also have rubber bushings from cruiser outfitters that were put on at the same time. Not perfect, but still usable. Asking 100 + shipping...

Unboxed and tested, but otherwise unused (has seen maybe a minute of runtime). Includes compressor, hose, bag, tip assortment More information here: Dobinsons 4x4 Zenith Air Compressor $300 shipped to your door Located on Bainbridge Island (98110)

I recently installed a Dobinsons ims kit (keeping factory UCA’s) on my 08 Lc200 and still have the factory wheels with BF Goodrich KO2 285/60r18 tires (more so because they have sub 5k miles). I’m stuck between 17” wheels with 0 offset: method 702, ssw apex, rock warriors or keeping the stock...

Selling a 6-month old set of Dobinson's Springs: Front: C59-302 (Teal) Rear: C59-327 (Teal) Asking $200 OBO for the set of 4x. Will ship at buyer's expense.

Hi all, I have two, brand new never installed, Dobinsons pan hard bars for sale. Front and rear, for 3”-6” lifts. $300 plus shipping, or pickup in Vancouver/Portland, Or

Dobinsons 5* Caster Plate Kit for 80 series Land Cruiser. Brand new in original packaging. Suited for 5-7” lifts. $150 picked up or will ship at buyer’s expense.

$1050 CAD. Brand new still in box. Going another direction with the suspension. Let me know if you're interested. I'm located in Vancouver, Canada.

Hello everyone, I am selling my Dobinsons Rear Bumper with dual swingouts for the 100 series Land Cruiser / LX 470 Bought and installed in October 2020 so about 1.5 years old. It is in great shape as I have only been out a few times with it. No trail damage whatsoever. Swingarms are already...

Dobinsons C59-327 rear springs for sale Were on my GX460 for about 12K miles before I got different rate springs. Fitment: 2003+ 4Runner 2″ Lift (2-400lbs of Accessories ) •03-09 GX470 2″ Lift (2-400lbs of Accessories) •2010+ GX460 2″ Lift (2-400lbs of Accessories) •07+ FJ 3″ Lift (Stock...

Any Dobinson's suspension experts out there? I recently acquired a GX470 with a Dobinsons MRA kit on it and realized when i was adjusting everything to get a baseline that it was missing the rebound screw from the front drivers side shock. Took it to a local shop who's researching it but...

It's time for me to let somebody else enjoy this car. It has been in my family for the majority of it's life, and in my possession for over a decade. I have over 100 pages of service history so I can't list it all here but I will provide some highlights below. Not in a rush - this thing is...