?

I'll be pulling the B series motor from my Fj45 to swap in a 3B. The B series motor has 200,000 km on it and I also have a 4speed with the emergency brake drum on the back of the transmission. Wondering what they each are worth ?

My engine light is on and my mechanic said it's because of the cats. The truck has about 400,000km on it with a motor replacement which has 270,000km 2007 Tundra 5.7 ( motor is a 2010 ) My mechanic says they can be cut out completely and my milage should be better. Does anyone have any...

My FJ40 beat and abused when I bought it last July did come with a like new never mounted Bestop bikini top. This is something that I am now getting around to addressing and I'm not sure how the channel mounts. Although there are no mounting holes in the channel ( looks like I'll have to drill...

I was an early order of Cybertruck ... 1 month ago.. An email from Tesla said that I could build my Foundation series Cybertruck... See pictures below. In the end.. 200 won... I did NOT have enough in me to sell my 200 Land Cruiser LAST V8 powered and buy a Cybertruck. Land Cruiser WINS ...

Hello all, I am thinking of making my 200 as a daily driver: When I bought it, I had plans to make this somewhat off-road capable (more than what stock offers). But now, plans have changed, and I am looking to get rid of my daily driver (Audi) and replacing it with the 200. The only problem (for...

1960 Chevy straight 6 interesting to see the comparison to the F or 2F. Even the bell housing look similar. What ya all think just thought I would share as once in awhile somebody asks something about the Chevy I6. It has some upgrade bits on it for sure. ,,,

Whats up with Enduro joints ? I got them for frame side of 4 link , dam things are 2 & 5/16 NOT 2 & 5/8 as the brackets are.

I have read a bunch of the threads regarding radiator replacement options for the 3FE as the OEM radiator is no longer available. I am leaning towards the Liland 1469AA2R as it appears to be a direct bolt in for the 1991 - 1992 FJ 80's (mine is a 1991 with 346K on it). The current one is an...

Hi guys, Kind of new here, did a lot of searches, but every rust is different, Just can't get the answer by myself Is this kind of rust a deal breaker? If it's around 19K before tax 150k mile 03, record is very good and the rest of the truck, body interior is perfect and clean How much do I...

Tried installing my new WKOR sliders yesterday but had to give up because I ran into a thick hard line on the driver's side that wouldn't budge and I didn't want it touching the slider directly. I'm assuming it's AHC? Wanted to bend it out a few mm for the u-bolt to clear but it feels...

Other cars that have proprietary coding systems usually have a list of people in various cities who offer programming services. Do one of these exist for LC/LX? I barely looked into the rabbithole of cracked techstream, and I'm not wanting to dedicate a laptop just for this. My dealer doesn't...

Anyone got any bump stops and/or limit straps they want to sell ?

Feeling like the Cruiser has a little too much body roll in the turns. I realize it's a Cruiser and not a sports car but I am wondering if new shocks alone would help or would it need springs too ? Would either of these help ? Don't want to ride like a brick but would like a little more...

Hi I’m planning to buy a new set of fifteen52 analog asphalt black 17” x8.5 wheels. Which size of tires I must buy because I don’t want to touch the suspension, I live it original. Awaiting suggestions Thanks

Hi, Have they quit building 40 and 60 power steering boxes ? Mike

Well as the thread suggests I have 1 diesel fuel tank installed and another in good condition I got with the rig (car was petrol and now diesel so the previous owner changed the tank) I do take long trips and at some stage I have to a long range fuel tank, so my out of the box question is: Can...

I think I need to put my rock guards back on , I cracked a headlight ,dang not cool. what ya think ,headlight rock guards or no rock guards. I took my rig for a rip this year and it hadn’t been wheeled hard in a long time. Worked flawlessly cheers all i think I need the rock guards . What do...

How far away from tire do you gotaa be to avoid spring rub when articulated, with a stock width axle ? I realize the frame has to be frenched to allow the towers to move over , my set up could be done without cutting frame but it only leaves 2" between tire & spring on coilover ?

The front plastic cover below the driver sear cushion...how to remove for access? THX

Anyone know if they are still in business? I have called them 1/2 dozen times no answer or return call.