fjc-man

I’ve not done it myself, maybe 2 remflex gaskets to compensate for the difference?

Day 2 of the drive started bright and early, the cruiser firing up without any drama after sitting in the cold overnight. After a quick fuel stop, we were pointed west and quickly crossed into New Mexico. We were treated to a beautiful weather...

I believe vacuum and mechanical advance combined is safe in the 32 to 36 degree range.

The air/fuel mix, and while the valve cover is off to pour oil over the rocker shaft, ajust the the valve clearance.

And at least a little compression! You know, suck,squeeze,bang,blow!

If your short block is fitted with a crank, cam and pistons, no.

Which Landcruisers’ needing a radiator?

If those aren’t frame mounted step / sliders get a pair that are. It’s almost new! Congratulations 🎈

That looks more like an 8 than a 3.

My 79 with Rustoleum grey steelies.

What tool / method did you use to remove the valve spring keepers?

I think that style T/S housing aways had the sidemarker light .

Will the engine rotate by the crank bolt?

What model year? North American model?

patch... bed is in fantastic shape.. other than the jig saw hack job original owner made brackets that hold 1x6 lumber against interior bed sides.. there are 0 dents from the inside of bed (single wall construction) from anything sliding around

Completed body & paint for Bushwacker delete.

There should be a plug on the left side of the glove box, towards the back. Plug it in and see if it still works.

Looking for some guidance on the parts that might be difficult to find on a 1982 FJ40? I have owned this truck for about ten years. Before I bought it a great friend owned it and sold it to me during a expensive divorce battle. The truck is I...

Gathering parts for my 8.2 rear differential upgrade on my 07 FJ

Cast iron diesel heads are prone to cracking between the valve seats.

Well removing that vcv sure simplified that! Didn’t it?🥹

Fig. 4-2 is Federal and Fig. 4-4 is California

No. That’s the carburetor via air cleaner housing sucking on it when the valve is open.

A “schosh” more toe-in and new tires.

Got my lines and curves back.