merbesfield
SILVER Star
Does anyone know where I can buy some +.40 over pistons? Besides SOR and MAF? MAF is 4 weeks out and SOR is +$150.00 more than MAF. Thanks
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
X2...Most good machine shops want the pistons in-hand before boring the block due to small variances in the various oversizes.For 75-80 2F?
Get them anywhere. Start w/ your machine shop, so it's his problem when they don't fit.
If machinist is too lazy to order them from EPW/Advance/CarQuest/NAPA/RockAuto, then you can order them yourself. But I would recommend finding another machine shop.
After a considerable amount of research and a couple phone calls looking for pistons and rings for my 3/75 2F motor
Mark Are these domed or flat?
If the head and the block go together, you'll need to use like pistons. Like replace domed with domed. If you use flat top to replace you'll lose compression.
Ed
Here is an old one that was just revived.:eek
https://forum.ih8mud.com/40-55-series-tech/20-all-2f-heads-identicle.html
Post #18
GL
Ed