- Joined
- Sep 17, 2003
- Threads
- 64
- Messages
- 4,427
- Location
- Sunnyvale, CA
- Website
- www.george4wd.taskled.com
Well, I had a CEL pop up on the dash a few days back, plugged in the ultragauge and read it out as a P0510.
Entered the menu system and cleared the code. All without access to the manual. So, a) the user interface is somewhat intuitive b) it can detect CEL codes, c) it can display them and d) it can clear them. Just an update that at least those functions also work correctly.
The P0510 has not re-appeared after a bunch of starts/stops/drive cycles - will ignore it unless it comes back to stay.
cheers,
george.
Entered the menu system and cleared the code. All without access to the manual. So, a) the user interface is somewhat intuitive b) it can detect CEL codes, c) it can display them and d) it can clear them. Just an update that at least those functions also work correctly.
The P0510 has not re-appeared after a bunch of starts/stops/drive cycles - will ignore it unless it comes back to stay.
cheers,
george.