Hey Bean, if those calipers are the same as 40 calipers you could get oem rebuilts for 60 bucks each and be done with it.
What have you done to your Land Cruiser this week?
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
May be looking into that next.
Does your wind shield wiper switch also rotate to the right? There’s a momentary switch on mine, 11/69 build
I despise prepping for paint. All new steel welded in and a thin layer of metal reinforced bondo to cover some of the low spots on the curve. Might just shoot Eastwood two party epoxy primer today. Last pic is a before.
Last edited:
Well, after getting the interior back together, including the back seat (FINALLY!), I was able to attend my first car show over the weekend. Rest assured, it was the only LV in it. Most people didn't know what exactly they were looking at, but a few did. One guy came up to me asking if I really knew what I had. I assured him that I did. His response was that it was the "car of the show" as far as he was concerned (out of over 250 entries). Was a fun day.
![IMG_7349[1].webp](https://forum.ih8mud.com/attachments/img_7349-1-webp.2780057/ "IMG_7349[1].webp")
![IMG_7398[1].webp](https://forum.ih8mud.com/attachments/img_7398-1-webp.2780058/ "IMG_7398[1].webp")
![IMG_7384[1].webp](https://forum.ih8mud.com/attachments/img_7384-1-webp.2780059/ "IMG_7384[1].webp")
![IMG_7402[1].webp](https://forum.ih8mud.com/attachments/img_7402-1-webp.2780061/ "IMG_7402[1].webp")
Cheers Gents!
Cheers Gents!
Thanks cims but I'm going to see what these do for know. If I change I will probably go with 3.70s or there abouts.
Awesome presentation!DHL man just came ,
Fresh shipment .......
NEW ( Orange ) BOOT, ACCELERATOR CONNECTING ROD 10/72-1987 FJ40 FJ60 FJ55 FJ45 HJ60 HJ45 78199-90351 / 78199-90352 / 78199-90353 - VintageTEqParts.com
( Orange) BOOT, ACCELERATOR CONNECTING ROD Sub Assy, Gas Peddle Orange Rubber Boot old part # 78199-90352 - NEW...vintageteqparts.com
View attachment 2776816
View attachment 2776817
NEW ( Orange ) BOOT, ACCELERATOR CONNECTING ROD 10/72-1987 FJ40 FJ60 FJ55 FJ45 HJ60 HJ45 78199-90351 / 78199-90352 / 78199-90353 - VintageTEqParts.com
( Orange) BOOT, ACCELERATOR CONNECTING ROD Sub Assy, Gas Peddle Orange Rubber Boot old part # 78199-90352 - NEW...vintageteqparts.com
Always the showman @ToyotaMatt !
Just about showtime. Emblems are on again. Just to take them back off. Hopefully the last holes I need to put in new panels.
- Joined
- Aug 12, 2007
- Threads
- 963
- Messages
- 19,508
YES !
Bottles Kit Pump Motor assy Blue Tine Reproduction Hose ...
1962- FJ40 - 1977 FJ40 Bottle KIT NipponDenso 100% MADE In JAPAN !
- Period Corred Reproduction GOLD CAD Plated Yellow Chromate Brackets 100% MADE IN-HOUSE at My the Rising Mechanical SKUNK WORKS LAB ......
- BLACK Bracket Portion Quality TOP SHELF Powder Koted ......
There a EARLY and LATER INCLINE Inner Fender Bracket NOTE :
Early Washer Reservoir Bottle and Pump Mounting Support Bracket 85361-60022 FJ40 FJ45 1963-9/73 - VintageTEqParts.com
THIS LISTING IS FOR THE BRACKET ONLY BOTTLE IS ONLY A PHOTO PROP ANA AVAILABLE SEPARATELY...........FYI Early Washer Reservoir...
vintageteqparts.com
Later Washer Reservoir Bottle and Pump Mounting Support Bracket 85361-60023 FJ40 FJ45 9/73-9/77 - VintageTEqParts.com
THIS LISTING IS FOR THE BRACKET ONLY BOTTLE IS ONLY A PHOTO PROP ANA AVAILABLE SEPARATELY...........FYI Early Washer Reservoir...
vintageteqparts.com
12v VOLT GENUINE NipponDenso JAPAN 12 Volts NON USA OEM TOYOTA Windshield Washer Bottle Resiover KIT 85330 , MOTOR PUMP , , 200mm BLUE-TINT JDM Style Washer Hose 1/62 - 10/84 Fj40 FJ50 FJ55 BJ40 , BJ42 , BJ43 , BJ44 , BJ45 , BJ46 , HJ45 - VintageT
GENUINE NipponDenso ALL Parts MADE IN JAPAN 12v / 12 VOLTS Note : Kit Comes with Smaller Black...
vintageteqparts.com
Last edited:
- Joined
- Aug 12, 2007
- Threads
- 963
- Messages
- 19,508
a new day has dawned and a new highest possible Benchmark BAR set
in my TEq world and in my Land Cruiser goings on this week …
i will be making a monodical step by step transition to all Gold Cad / Yellow Chromate Electroplated or Silver BLUE Zinc Electroplated also and or ..
it’s a brave new and exciting world now I hope this pans out for the greater good of the Vintage Toyota Land Cruiser Community As a whole
my goal on paper and in my fragile egg shell mind is to be fully plated by start of holidays season , that's the plan anyway
if you need to know or want to know if something is newly fresh plating or not , please simply ask , don't be shy speak up and
in my TEq world and in my Land Cruiser goings on this week …
i will be making a monodical step by step transition to all Gold Cad / Yellow Chromate Electroplated or Silver BLUE Zinc Electroplated also and or ..
it’s a brave new and exciting world now I hope this pans out for the greater good of the Vintage Toyota Land Cruiser Community As a whole
my goal on paper and in my fragile egg shell mind is to be fully plated by start of holidays season , that's the plan anyway
if you need to know or want to know if something is newly fresh plating or not , please simply ask , don't be shy speak up and
Last edited:
That ride is too cool! Awesome work…
Finished my passenger fender.
- Joined
- Aug 12, 2007
- Threads
- 963
- Messages
- 19,508
- Joined
- Aug 12, 2007
- Threads
- 963
- Messages
- 19,508
if i think what im thinking .........
that will be a VINTAGE Toyota FIRST Seth ? ...........
Historically Significant from my point of view .....
i hope i am spot on ?
Not yet. Still looking into possibilities..if i think what im thinking .........
that will be a VINTAGE Toyota FIRST Seth ? ...........
Historically Significant from my point of view .....
i hope i am spot on ?
Green Bean
SILVER Star
Got tired of the lame stock oil pressure gauge. Installed this mechanical one under the dash without drilling any holes.Not yet. Still looking into possibilities..
Got the headliner in!
Green Bean
SILVER Star
Looks awesome. Not an easy task. Little-by-little...and before you know it you'll be back on the road again.
What’s the part number on that 3M self leveling?