Does Front Runner sell/ship to the US as well?
What did you do on your 70 series today? (44 Viewers)
- Thread starter IH8MUD
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Does Front Runner sell/ship to the US as well?
Yup.
Camping Chairs & Tables | Front Runner
Create a home away from home with gear that is comfortable, sturdy, functional, and travels compact. The Front Runner Expander Chairs fold down to 1/17th their size. The Front Runner line of standard and pro stainless steel camp tables can be stored and locked away underneath all Front Runner...
www.frontrunneroutfitters.com
jblueridge
SILVER Star
Yeah, it turned out pretty good. The swing arm's hinge tube warped a little during welding. I had to sand the bronze bushings down some to get things to go together. The other arm will eventually hold a storage box for camping.
Replaced the clutch master. Bought one for a mid eighties 60 series and swapped the stud and pedal attachment over from mine.
When you test your fan clutch and know for a fact it’s working very damn well...
Loaded it up for our annual Turkeyday camping trip. Will pull the trailer with it, will be slow going, but we're not going too far.
Thanks s
Thanks so much Homer ! Have a great week
FJBen
SILVER Star
1 of these tractors is slightly faster than the other.
jblueridge
SILVER Star
I put a 2K (2,,000) ohm resistor in series with the pre-heater timer's coolant temp sensor.
The system now thinks coolant is colder than it really is by maybe 16F (9C).
This all started over a year ago when I broke the factory original electrical connector that goes on the sensor.
new connector with resistor soldered in line.
I put a Deutsch connector on this pigtail so I can swap this rig out if I decide it is not good for some reason.
Usual overkill with sleeves and shrink tube.
I am using the safety wire instead of the finicky metal clip that came on the connector.
Anybody working on it can see exactly how to get the clip off.
Goofy figure-8 zip tie holds deutsch connector in place.
The system now thinks coolant is colder than it really is by maybe 16F (9C).
This all started over a year ago when I broke the factory original electrical connector that goes on the sensor.
new connector with resistor soldered in line.
I put a Deutsch connector on this pigtail so I can swap this rig out if I decide it is not good for some reason.
Usual overkill with sleeves and shrink tube.
I am using the safety wire instead of the finicky metal clip that came on the connector.
Anybody working on it can see exactly how to get the clip off.
Goofy figure-8 zip tie holds deutsch connector in place.
Supervised for once. Swapping in the winter tires. My back hurt just watching. 
Does this mean that tire swapping is now woman's work?
Someone did right....
I drove into a hole
Made a spontaneous trip last minute (6pm) up to Big Bear last night. Craziest 24hrs ever! 3.5 hours there 7 hours back. Many, many accidents and cars slid off to the side. Even saw a Buick lose an axle. Aired down the tires to 15psi and didn’t have a problem.
Also, Happy thanksgiving to those who celebrate it!
Also, Happy thanksgiving to those who celebrate it!
Last edited:
Amazing!!!
I replaced the broken speedo needle in my PZJ70 that was what appears to be a bad repair by a previous owner that failed a few weeks ago, leaving me without a needle to determine my speed. Not like I have to worry about breaking speed limits in it anyways but it still bugged the hell out of me.
Popping off the old broken one was a bit nerve-racking but it did come off and replacement went on easily.
Popping off the old broken one was a bit nerve-racking but it did come off and replacement went on easily.
