Trail Tailor Offerings

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Is this an actual prototype and you're going plastic instead, it just a good condition factory part that you're going to use as a template for the metal product?
 
Installed my Sliders, Front Fender Vents, and D-Pillar vents.

First things first ... If you are just discovering Trail Tailor, welcome. His parts are amazing and top notch. I have ordered so much s*** for my rigs and have never been disappointed.

Next things ... Trail Tailor doesn't produce or sell anything unless all the buses are worked out and it is truly ready for market.

Now ... Pics of my Silders and Vents

TT D Pillar Vebts.webp


TT Front Fender Vents.webp


TT Sliders.webp
 
Spook50 said:
Is this an actual prototype and you're going plastic instead, it just a good condition factory part that you're going to use as a template for the metal product?
Click to expand...


These are a buyout item. I will have 3 blue and looks like 10-11 gray (don;t know exact color yet) Pricing will follow later after I get them, ballpark 100.00 each

Color change with SEM Color Coat plastic paint would be the easiest.
 
Do you have any plans to do a run of the front skid plate or B pillar trim panels in the near future? Next time I do my knuckles I'm going to get the 4x4Labs 1 ton Chevy steering linkage kit and I wanna protect it in case I careen through a mob of thick skulled rioters.
 
Spook50 said:
Do you have any plans to do a run of the front skid plate or B pillar trim panels in the near future? Next time I do my knuckles I'm going to get the 4x4Labs 1 ton Chevy steering linkage kit and I wanna protect it in case I careen through a mob of thick skulled rioters.
Click to expand...

The 60 front skids will be cut this coming week and the B-pillars are based on inquiries. B-pillars sales have really dwindled and I have to order 25 sets at a time from the laser cutter. Last batch took 15 months to sell.

J
 
TRAIL TAILOR said:
The 60 front skids will be cut this coming week and the B-pillars are based on inquiries. B-pillars sales have really dwindled and I have to order 25 sets at a time from the laser cutter. Last batch took 15 months to sell.

J
Click to expand...
Yikes. Luckily my factory B pillar trim only has a few very minor cracks so that's not an urgent thing. Put me down for a pair when next you order a batch though.

Definitely want a skid plate though. Hoping to get one before the winter weather hits.
 
How are you planning to address the C-pillar on Poppy and Dingo? If you delete the rear plastic trim that goes in the cargo area, there is a raw edge of fabric that is exposed on the C-pillar. Any plans to make a cover in that section?

I'm excited for the center dash piece, and already have your B-pillar covers. Thanks for the great work!
 
My dash pieces are giving up the ghost. Every time I pull them off another small piece breaks away. I so would love to see aluminum replacements available. Too bad the 62s are such a niche market compared to the 60s. Of course I guess I could suck it up and get a new gauge surround from Partsouq to last me until something eventually becomes available....
 
Dang J, your out of stock on a lot of stuff... you must be having too much fun making new products and playing with Dingo:rofl:
 
Hojack said:
Dang J, your out of stock on a lot of stuff... you must be having too much fun making new products and playing with Dingo:rofl:
Click to expand...

Yes, lots of new products. I have a floor full of cut parts and pieces and about 100 pieces at the powder coater at the moment too. It fluctuates, seems no one wants it unless it's out of stock and I quit jumping through hoops to make one part for people and get off my batch schedules. SO, they will get back in stock once their number is up and I'm ready to do a complete batch. No more 1-3 pieces..

Dingo and similar builds may become the way of the future for TT. :meh:

It's also getting to that time of year when I start shutting down and just work on my stuff and build inventories for next year.

J
 
TRAIL TAILOR said:
Yes, lots of new products. I have a floor full of cut parts and pieces and about 100 pieces at the powder coater at the moment too. It fluctuates, seems no one wants it unless it's out of stock and I quit jumping through hoops to make one part for people and get off my batch schedules. SO, they will get back in stock once their number is up and I'm ready to do a complete batch. No more 1-3 pieces..

Dingo and similar builds may become the way of the future for TT. :meh:

It's also getting to that time of year when I start shutting down and just work on my stuff and build inventories for next year.

J
Click to expand...
I don’t blame you J, just keep building your awesome products for your builds and throwing us a bone from time to time to keep us happy:grinpimp:
 
You must log in or register to reply here.

Share this page

Back
Top Bottom