Traction

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 16, 2005
Threads
13
Messages
41
Location
Fort Smith AR
I have a 76 Kroozer that is my DD and a weekend warrior. I love it but im so sick of geting into a mud hole and needing one tire to spin to get out but it doesnt cause of the crappy limited slip diffs.
What would ya'll run in the Diffs.?
Lockright locker weld it up ?
or is there some kind of an ajustment i can make to get this things to spin both tires?
 
Rear lockers....I have a lockright in my 76 and it does well getting me out of mud, sand, etc....
 
i would get an aussie locker or lokrite one of those auto cheapies, i run an aussie and am very pleased with it. welding would be the cheapest option if you dont mind your tires squelin around every turn
 
Hi All:

What kind of tires do you have on your FJ40? Makes a big difference in "real" mud.

I also vote for an Aussie Locker, LockRite, etc. in the rearend; forget LSD diffs - they are a waste of time and $ for a real 'wheeler.

Regards,

Alan
Seattle
 
DSRTRDR said:


I would install an ARB....but that is just me. I like the predictability of an open differential....



There are many people that have posted up that they use a welded rear on the street....at least it would not bang and snap like a valu-lok....


:beer:
 
DSRTRDR said:


Yup. It's WAY more predictable than an autolocker. A couple bad points: increased tire wear on the rear, and less-than-optimal directional stability on ice and snow (but not much worse than an autolocker).

My experience with a Lockright was better than most others', but I still like my 'lincoln locker'. I will go for a selectable locker in the future, but will not put an autolocker back in the rear.
 
I had a welded rear and now I'm running an Aussie Locker. The welded worked fine on the pavement, and I have no complants with the Aussie.

The one thing you need to watch really close in both setups is the tire pressure in the tires on the same axle. They both need to have the same PSI.
 
ARB. Mine are going on 10 years old, the saving's in tires probably paid for the extra cost over an auto locker.

I've never had a welded rear or an auto locker but I've ridden in enough to know I'd never do either for a DD. Probably fine for a trail rig.
 
While being a little costly compared to some, my Powertrax No-Slip had very good street manners and locked solid offroad.

Wheel base might be the issue, I had it on a FJ60.
 
alot of it depends on your budget as well, next for me will be an arb
 
I have 33x12.50 buckshot mudder on it and i am on a high school seniors budget probably around 200$ or so
thanks alot for the ideas.
 
Back
Top Bottom