- Thread starter
- #121
Murf, thanks again. Truck runs like a champ.
Right on Josh! I enjoyed seeing your "other" Toyota yesterday. Note: Josh has a custom solid axle late model Taco built for crawling and action - it has seen both
. Pretty cool ride
Toyota OEM parts supplier (AZ) Riverview Toyota
- Thread starter murf
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Right on Josh! I enjoyed seeing your "other" Toyota yesterday. Note: Josh has a custom solid axle late model Taco built for crawling and action - it has seen both
. Pretty cool ride
- Thread starter
- #123
Indeed! Members get full details for $69-$79 depending on condition (extra buffing, etc). Never any more than $79.00 out the door. As usual the vehicle needs to have all personal stuff removed (and therefore not in the way) before bringing in and the veh needs to be in somewhat reasonable condition (i.e. not covered in MUD 
)
Murf
)Murf
After seeing how good my rig came out, I can say this is a GREAT DEAL !!! I had some really bad pin striping and it is GONE now. Some of the gouges were really deep. When you can see it on white, ya know ya got some serious work to do!!!I would/will do it again when the times comes. Spose I could hold off on driving single tracks/chasing rabbits.................Indeed! Members get full details for $69-$79 depending on condition (extra buffing, etc). Never any more than $79.00 out the door. As usual the vehicle needs to have all personal stuff removed (and therefore not in the way) before bringing in and the veh needs to be in somewhat reasonable condition (i.e. not covered in MUD
Murf
. . . and the veh needs to be in somewhat reasonable condition (i.e. not covered in MUD
why do you hate 40s
- Thread starter
- #126
We are having having our Buy 3 get the 4th tire for one dollar promotion this month in June.
This applies to all Original Equipment sizes available through our supplier (even for Non-Toyotas!). ** see below for non-OE sizes (35's, etc)
We also have a $70.00 Michelin rebate (easy rebate through Michelin that provides you a $70.00 Visa gift card) currently that makes us the lowest prices on Michelins in town. For example: A set of P26570r16 Michelin LTX tires are $678.00. Less the $70.00 rebate the cost per tire would end up at $152 each (678-70= $608 divided by 4). Additional would be: sales tax, tire tax ($2.00), stem ($2.00), mount and balance ($7.50 ea for CSC members). Road Hazard is included in the price of the tires (1st year free replacement, 2nd year 50% protate, no mileage limit on the RH)
** Non O.E. sizes will be priced out at $10.00 about our cost. Shoot me a PM and I will see what we can come up with. Many times no one can touch our $$ , other times we arent the very lowest but close. Non OE do not come with the free road hazard FYI.
This applies to all Original Equipment sizes available through our supplier (even for Non-Toyotas!). ** see below for non-OE sizes (35's, etc)
We also have a $70.00 Michelin rebate (easy rebate through Michelin that provides you a $70.00 Visa gift card) currently that makes us the lowest prices on Michelins in town. For example: A set of P26570r16 Michelin LTX tires are $678.00. Less the $70.00 rebate the cost per tire would end up at $152 each (678-70= $608 divided by 4). Additional would be: sales tax, tire tax ($2.00), stem ($2.00), mount and balance ($7.50 ea for CSC members). Road Hazard is included in the price of the tires (1st year free replacement, 2nd year 50% protate, no mileage limit on the RH)
** Non O.E. sizes will be priced out at $10.00 about our cost. Shoot me a PM and I will see what we can come up with. Many times no one can touch our $$ , other times we arent the very lowest but close. Non OE do not come with the free road hazard FYI.
Murf, we could use some new skins for the 07 LandCruiser. Michelins would be great, we have everything stock including the wheels. Will call you this week to place an order.
It goes without saying, Murf is a class act. Had my wife take advantage of the tire offer and we got 4 new Michelins at a very good price, thanks Murf for keeping this club informed of these great offers.
If you need tires there is still time left
If you need tires there is still time left
i plan to do some brake and axle work when it cools off. do i need to have all the part #s when i go to see krystal? or can i just ask for front and rear rebuild kits? i am starting to get everything for a regear, and figured on some r&r while i was at it. thanks again murf!
- Thread starter
- #130
She will look up the #'s for you. If you have them already, you can certainly bring them along!
As Murf well knows I have been spending plenty of time with Krystal lately as I have been going through the front end of the Troopie...she has been great to deal with and always happy to help.
Also in my case with an Australian rig some of the parts we THOUGHT would be correct have not been and yet she is still happy to keep searching.
The pricing is as good as I would get ordering from many of the websites so why not support locally and keep a good girl employed?
Today I found a Toyota dealer in Canada that deals with the mines and has an entire division just for mine rigs, I plan to ask Krystal about working with them so her life will keep easier
Also in my case with an Australian rig some of the parts we THOUGHT would be correct have not been and yet she is still happy to keep searching.
The pricing is as good as I would get ordering from many of the websites so why not support locally and keep a good girl employed?
Today I found a Toyota dealer in Canada that deals with the mines and has an entire division just for mine rigs, I plan to ask Krystal about working with them so her life will keep easier
- Thread starter
- #132
Kristal is standing by her phone/computer waiting to help! Her direct phone and email is in post #1.
(resurrected thread due to inquiry)
Thanks!
(resurrected thread due to inquiry)
Thanks!
- Joined
- Apr 21, 2005
- Threads
- 113
- Messages
- 25,673
I know most of you are 80 series owners but anyone who owns a early cruiser Toyota only supports the parts system back to 3/69. In a lot of case the parts are still available. You just need to have the part number. If you PM me I might have the number you need or know someone who does.
John
- Thread starter
- #134
another 100 lift
An 06 100 series owned by local Mudder Mtkreitz came in for an OME lift w/ 865's and diff drop. finished it off with running board removal and 27570r18 BFG KO's.
He went out of state to find the exact LC he was looking for.
PIcs of before and after >>
NIce rig and good guy...hopefully see him at an upcoming meet.
An 06 100 series owned by local Mudder Mtkreitz came in for an OME lift w/ 865's and diff drop. finished it off with running board removal and 27570r18 BFG KO's.
He went out of state to find the exact LC he was looking for.
PIcs of before and after >>
NIce rig and good guy...hopefully see him at an upcoming meet.
- Joined
- Jul 20, 2004
- Threads
- 274
- Messages
- 23,204
- Location
- Chandler, AZ
- Website
- www.tontorecreationalliance.org
bring it out in the morning, we will break it in on Rocker Panel Pass!
Does Kristal have any idea how hot it is to be "Toyota Parts Girl" ?
Kristal is standing by her phone/computer waiting to help! Her direct phone and email is in post #1.
(resurrected thread due to inquiry)
Thanks!
An 06 100 series owned by local Mudder Mtkreitz came in for an OME lift w/ 865's and diff drop. finished it off with running board removal and 27570r18 BFG KO's.
He went out of state to find the exact LC he was looking for.
PIcs of before and after >>
NIce rig and good guy...hopefully see him at an upcoming meet.
Another fine build by Camelback Toyota
You need some "Built by Camelback Toyota" stickers
Phil, will ranking the Tbars and running rear coil spacers achieve the same effect? I really like the ground clearance he got with that lift kit.
Yep
IIRC Im 21.5" hub to fender on the front
Pictured with 285s
BlueCruiser with OME and 295's next to me
- Joined
- Aug 17, 2011
- Threads
- 58
- Messages
- 510
- Location
- Scottsdale, AZ
- Website
- www.overlandtheworld.com