Teq pto winch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It would be nice to be able to spool out
How do I tell I'm getting the right levers and box?

I appreciate all the good info.

I dunno about the early one piece transfercase PTOs but the split case PTO's below have the two piece drive gears for forward/reverse operation, those gears are constantly driven, the single direction PTOs have the single driven gear that selects on and off to engage onto the drive gear in the transfercase and isnt constantly driven

I've got forward/reverse PTOs on both my trucks but cant spool out that fast coz the pto shaft and coupling is too rattly once you start spinning it up too fast, its handy to have but freespooling is definately faster to spool the rope out
PTOs.webp
 
I've got forward/reverse PTOs on both my trucks but cant spool out that fast coz the pto shaft and coupling is too rattly once you start spinning it up too fast, its handy to have but freespooling is definately faster to spool the rope out

I agree that powering-out is a waste of time for spooling out rope. But I think it may be useful for backwards-descent down a steep slippery slope (where "forwards-descent using the foot brake" is likely to make your tyres break their grip).

I've never done it ... but I like the idea of being able to if the need arises..

:beer:
 
I was thinking if you are in the middle of a pull and needed to release cable tension so you can pull from another angle.

I've never used a pto so no experience in how they operate.

maybe this isn't a big deal.
 
All PTO for the early one piece transfer case imported to the US were forward/neutral/reverse. While there are two gears going into the transfer case only one is in contact with the single PTO gear in the the transfer case. Not sure what the problem is with idrive/neutral only PTO. Since they are driven off the transmission you have a option of power in and out using the transmission. The FJ25 PTO attached to the transmission not the transfer case. To use than one you had to put the transmission in neutral. Those were forward/neutral/reverse. If it wasn't it would only work in one direction.

In the US most split transfer case PTO were see are drive/neutral only I know myself and another who would like a forward/neutral/reverse if you find any spares.
 
Thanks again everyone for the pics of the pins. My dad has a friend that owns a machine shop so I can probably get him to make them for me.

I'm curious now about the protruding worm gear shaft like in Post #17. Why would Toyota do that? Is it so that some other accessory can be run off of it. You would have to cut a hole in your bumper to access it, but it could be done.

:hhmm:
 
....
I'm curious now about the protruding worm gear shaft like in Post #17. Why would Toyota do that? Is it so that some other accessory can be run off of it. You would have to cut a hole in your bumper to access it, but it could be done.

:hhmm:

Well it gives you further options. I've often thought of putting something on there so that I can rotate the worm more easily by hand (which I presently do by reaching behind to the universal joint in the driveshaft).

(I tend to rotate the winch-drum by hand when I've finished winching and am tightening up the cable and stowing the hook while getting prepared to drive on.)

And Toyota did a similar thing on some PTO-boxes to get a rear-facing flange available (so you can drive stuff at the rear if you want to).

PTO1a.webp

As you can see, they fitted a nice mating-flange to make it look neat when not being used.

And here are those different brakets I was talking about for the driveshaft intermediate-support-bearing (which some refer to as a pillowblock.

This is what I think mine is supposed to have:
PTO7Trademe1.webp
(Bracket off the LH-chassis rail)

And here's another version where there's a bracket off the front crossmember:
PTO7.webp

:beer:

PS. None of these pics are mine.
PTO1a.webp
PTO7Trademe1.webp
PTO7.webp
 
Well it gives you further options. I've often thought of putting something on there so that I can rotate the worm more easily by hand (which I presently do by reaching behind to the universal joint in the driveshaft).


The end of the universal joint going into the crossmenber is splines and fits on the shaft that runs thru the no longer available pillow box. Early version the spline of the universal joint was long and mated with quite a bit of the shaft. Later ones it was must shorter. While both long and short could rust to the spline shaft the longer is a real pain to deal with. The front crossmember is boxed making it hard to get to it. Need to be careful not to destroy the pillow box bearing and housing.

And here's another version where there's a bracket off the front crossmember:
View attachment 734234

This is the only style the US got. The PTO winch was gone by the end of the seventies. In 79 those two years for the pillow block were there but did not line up with the hole in the crosmember.:hhmm: :confused: :meh:
PTO7.webp
 
I should explain the background of my winch..

I bought and fitted it back in 1981 without knowing what model landcruiser it came off (but I now believe it likely was a pre-1975 FJ40 or similar).

At least split-case PTO-boxes weren't available on the second-hand market back then so that eliminated the worst potential mistake I could have made of buying a PTO-box for the wrong type of transfer case.

And I hear (from threads on ih8mud) that some people remove the cover on their transfer cases only to find the drive gear missing. - I was lucky in that I never experienced this problem either. (So beware of this.)

And another thing to beware of..... There are other threads here revealing how people get hold of the "one-direction PTO-box" and assemble everything only to find their winch-drum gets powered backwards! :eek: (I never did understand exactly how that happens but I guess it must be from a mismatch between their winch and PTO-box.)

Anyway my 1979 is without any "ears" on the frontcrossmember/radiator-mount (which are present in the pic directly above) so I made my own bracket for my pillow-block (and I see just now that Toyota themselves do call it "BRACKET, PILLOW BLOCK") off my LH chassis rail. But I've never been happy with my workmanship there.

So thanks Redgrrr for starting this thread because it has finally triggered me into locating (I think - fingers crossed) a proper OEM bracket for myself.


:beer:
 
In the US the FJ40s only came with really one style of pillow block bearing. The ears that it mounts to are part of the radiator bracket. The bracket is riveted to the the front crossmember. The bracket moved toward the center with the 79 non A/C models no longer lining up the opening. Not sure if this was true on A/C models. US market received three different PTOs. One for the FJ25 that bolted to the transmission. No special gear in the transmission so any FJ25 4 speed transmission could have a PTO installed. The 61-mid 63 FJ40 PTO. Probably the rarest one that Toyota imported. Mounted to the transfer case. 61 thru mid 62 only those mounted with the PTO had the gear in the transfer case. Later all had the gear. Mid 63 until 7/80 PTO that mounted to the transfer case. All three speeds (early into the 74 model) has the PTO gear in the transfer case. On the four speeds it was hit and miss if the gear was there, with most not having it. Those without had a spacer. The spline was ten on the three speeds and sixteen on the four speeds so you need to find the correct PTO gear. All these were forward/neutral/reverse.

Many options on PTO but other types were most likely imported later. I have a one direction split case PTO I hope work work on my setup. It's a A440F/split case. Was told that is what it came off of. Came wiith the complete shifter that bolts to the transfer case. Would still like to find the F/N/R to use on my 79 that I plan on update to a T/T out of a 82 FJ40. Also have a friend with a RHD late model FJ45LP-B looking for one if anyone in NZ or Ozzie local any. Split case PTOs are harder to find here than the earlier ones that were imported.
 
Thanks to everyone who has replied!

The info and resources that mud contributes to the Land Cruiser community is second to none!

I didn't know there were this many parts to track down.

1. Pto box and matching shifter/lever
2. Drive gear in transfer case
3. Pillow block and bracket
4. Drive shaft
5. Winch with frame bracket
6. Safety hinge for lever

Am I missing anything? Thanks again for everyone that has contributed to this thread!

Edgar
 
Last edited:
This part?


Thanks for the link I skimmed it on my phone. But will Have to sit down when I'm on the computer and do the proper read through....

Ill add that to the list... I have a feeling this is gonna take some time to round all this up.
I'm fine with that
image-20762547.webp
 
Thought I'd add this to the thread. Took apart the pillow blocks today and found a mess. One bearing was locked up and all the dust seals were rusted bad. Cruiser Dan, says none of these parts are available.

So, I got a number off the bearing and I'll start looking Monday. 6205DU Japan NSK 627 Hopefully I can find the seals, also.

One housing, one bearing, two dust seals, flat ring and a snap ring.

Pictures are bad, but it is very rusty. The dust seals have a felt ring in them. Not sure if we'll be able to find them like that.

I posted this in my build, also. Thought you all might like it too.
IMG_1785.webp
IMG_1788.webp
 
Let us know if you find the bearing. Would like to change them in mine. Di yours have this collar on the front output. It appers to be a collar pressed on.:meh: The front one in th second was pulled from a 77 FJ55 but I believe it was originally on a earlier FJ55 since the front frame horns were a piece weled on not bolted.

Every winch of mine that I checked had the front output and three plugs. Did another one or two to check but those are early and my PTO off a FJ25 had both items.
IMG_1256.webp
IMG_1257.webp
IMG_1249.webp
 
It looks like you have so many PTO winches you don't have any more room for them.

It think you are a hoarder...Let's call A&E!

I am glad to see that the long shaft in your pic is welded though. I saw that mine was welded and thought maybe a PO had modified the shaft to fit and I was told it was original to the vehicle. So I guess the long shafts had the ends welded on to them.
DSC02423.webp
 
Mine did not have the collar on the blocks, but I don't know what the shaft came out of. PO bought it from Japan. I'll work on finding parts this week.

I believe around 1980 all Land Cruisers that had a PTO pillow block attached like the in this pictur posted by lostmarbles in this thread. The JDM still had PTO winches many years after they no longer imported to the US. This is very similar to the setup used in the FJ55 which would explain the lack of the collar.
PTO7Trademe1.webp
 
I have one block, in that spot and another block back towards the PTO. It should help my problem with the exhaust dumping right in the same area. Now, I can hug the frame and try to miss the exhaust. The shafts will have to be cut to size.
 
Back
Top Bottom