SOA Help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 15, 2005
Threads
51
Messages
508
Location
Wisconsin
so im at work and i plan to do more research when i get off but i was looking at one soa done on a land cruiser and it looked to be alot of work. im not saying i wont do it if i have to but i was wondering what you all did i want to hear differnt stories from people on what they did if there is any short cuts and what not right now im running no powersteering but i do plan on throwing a saginaw in there soon like in the next few months

thanks everyone who looks at this and spending time to read it
 
crazylandcruiser said:
so im at work and i plan to do more research when i get off but i was looking at one soa done on a land cruiser and it looked to be alot of work. im not saying i wont do it if i have to but i was wondering what you all did i want to hear differnt stories from people on what they did if there is any short cuts and what not right now im running no powersteering but i do plan on throwing a saginaw in there soon like in the next few months

thanks everyone who looks at this and spending time to read it


yes lots of shortcuts, sure way of messing something up,

dont take short cuts, lots of people out here to help. look at some photos, you can see mine if you want,


do cut and turn
evything else is pretty staight foward.
 
You certainly don't have too...

i am running some of the more difficult trails in the southeast without a springover and am not planning on it anytime soon...

they do offer a better ride, more flex etc... but no reason why you have too...

certainly DO NOT do it if you plan on taking shortcuts...
 
The hardest part is cutting and truning the knuckles. Which can be done with a grinder and some patience. The rear axle is easy. There was a write up in trails a few years back IIRC.
 
thank you everyone so much the first guy sent me a link and i read it and i saw that the guys main advice was to not take short cuts so i guess i wont i just didnt want to cut and turn the knuckles cause i always get worried im gonna screw something up but im gonna do more research if you guys who have done it have an links on were to see these pics in great detail or your guys pics you guys took that would be really helpful thanks again to everyone who looked and spent the time to respond much appreciated.
 
crazylandcruiser said:
thank you everyone so much the first guy sent me a link and i read it and i saw that the guys main advice was to not take short cuts so i guess i wont i just didnt want to cut and turn the knuckles cause i always get worried im gonna screw something up but im gonna do more research if you guys who have done it have an links on were to see these pics in great detail or your guys pics you guys took that would be really helpful thanks again to everyone who looked and spent the time to respond much appreciated.



dont be afraid to do the work, it sound tougher than it is, i remember when i started mine, i was like what the hell have i got myself into. but a little patience, attention to deatil and you can do it. you can get your axle cut and turned no biggie,

good luck, if you need help pm me i got pics and can help
 
Back
Top Bottom