Shocks for a lift?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 3, 2005
Threads
39
Messages
206
Hey

So I'm putting a 4" lift on my truck and I've had an offer for a set of 4 new Pro comp es 3000s for 30$ each I was told that that wasen't a good deal by some and then that it was by others....and then that the pro comps sucked and then were recomended by others......my question it what would be some good inexpensive shocks that would fit a Fj40 with a 4" lift and 2" over stock shackles?....would the pro comps be a good choice....I'm just looking for some advice from those who have tried them and could point me in the right direction...

Thanks!
Brandon
 
pro comps are fair. I know it's double the money, but I have Bilstiens and they make a HUGE difference. I had Skyjacker Hydroshocks and they were not very good, glad one broke and had to replace them.

Woody and Pablocruise have recommended some Deutch shocks that are about the same price as Pro comps which they say are pretty good. Do a search on shocks in this section and you should find them. I think they were Deutch 3000's but not sure.
 
Heard a lot of people saying Bilstiens make a "big" difference. Could anyone expand on that for me? You notice the feel where? Off-road? On-road? The ride is smoother? More stability? Are they remote reservoir? Whats the ballpark $$ for one of 'em? THANKS!!! :cheers:
 
Hossdog said:
Heard a lot of people saying Bilstiens make a "big" difference. Could anyone expand on that for me? You notice the feel where? Off-road? On-road? The ride is smoother? More stability? Are they remote reservoir? Whats the ballpark $$ for one of 'em? THANKS!!! :cheers:


$70-$85 each, depending on where you find them.

Haven't taken mine off road since installed, but Treerootco has and loves them.

Big difference on the highway in the ride, could almost forget your driving a 40. Nice and smooth.

Bumpy city streets are still bumpy, but damped. It is after all still a truck with leaf springs.
 
I'm running about 4" of lift on my '76, by virtue of extended shackles and some newer looking leaf springs, I believe all those parts are HFS (it's a P.O. install). Also have the Procomp 3000s.

Can't honestly say that I have any complaints, but with stiff springs and 33" BFG mud's, it would be hard to tell. I bought the truck and drove it for a couple months with no shocks at all, so it all seems like a big improvement to me.

I can tell you that $30 is the going rate for those shocks, so that's not a "deal", especially if whoever is offering them has already used them for awhile. 4wheelparts routinely sells them as a package for prices that breakdown to at or around $30 each when everything is said and done. I believe they call it their "Shocking Deal".

Just my 2 cents.
-Matt
 
wow...ok so $30 isn't a good deal but they might be ok shocks.....so I was looking at rancho 5000 and it says that they are either for no lift or for a 3" lift.....where do I get ones for a 5" lift? what length do I need to make it work again? remember I have 4" spring and 2" over stock shackles? so yeah just curious....thanks againg for all of the responses this site is always so helpful!!!

Thanks
Brandon
 
If you have added a lift to your truck, I think you should measure your compression/extension lengths before purchasing any shocks.

Review the shock xls documents (available from the tech section) before making a selection.

I have approx 4" of lift and am running Bilstein 5125's with a 12" stroke front (w/ford shock mount) and rear (upper mounting moved inward).
Highly recommend them :D

BE5-6249-H5
Travel 11.94", Col. 17.91, Ext. 29.7, 5/8 Mounting 255/70 valving

The 5100 series is "reserved" for specific vehicle applications.
The 5150s are generic length, with an external oil reservoir.
(available with softer 170/60 or stiffer 277/70 valving)
The 5125s are also generic length (10",12",14" travel), with no external oil reservoir.
(also available with stiffer 255/70 valving)

Where can you get them?
Try Shaffers offroad (on the board).
 
it wasnt a matter of cost as much as i was finding the right size comp. and exp. i had to look at 3 diiferent companies to find the right sizes, and yes i just bought the cheapos, i dont really care, its a crauzer not a caddie, im sure the more expensive shocks are nice but my ass wont know the diiference
 
Yeah so I was looking at the different sizes and was thinking (I know thinking was the first mistake...hehe).....Basically I need to find a shock that has an exceptable comp length and then go for as much travel as I can find....my question is with a lift on (it's in the mail not on my truck yet, can't measure) whats an acceptable compessed length I mean I don't want them to bottom out and I don't want them preventing a full droop, so yeah I'm tring to figure this out so that I can have everything I need to do the lift and drive it the next day...so does anyone know what an acceptable comp length it for stock mounts on lets say a 5" lift...
 
that my friend is something you may have to wait till you get the lift on and test yourself, to many variables. what works for some wont work for others.
 
I have a set of sligthly used Bilsteins on the front of my stock FJ55. I have a set of OME's on the rear. The Bilsteins on the front are awesome compared to other shocks I have used. If you can afford them I say go for it. Bumps arent that noticable and it seems to ride smoother and quiter. I have used Rancho 5000;s and RS9000's, Heckthorns, D-techs, and a few others. I used to just change everything over to the RS9000... but now I am thinking of going to Bilstein 5150's up front and some 5100 or 5125's on the rear when we lift the pig.
 
Yeah I think I want to try and find some used Bilstein 5100's namely the BE5-6249-HO but we'll see how that goes
 
Bilsteins are fairly affordable for what you get. Many folks I wheel with are running them and love them. I am running the OME's and like them but wish I would have gone with Bilsteins. As for affordable options......stay away from Procomps.....RS5000's are a good affordable choice.
 
I got Rancho 5000 on the front, and ProComp 3000 on the back with about 5" lift(don't ask). The ProComps are terrible. There is a noticible difference between the 5000's and the 3000's in plushness but that may not be all the shocks doing. I just think the 3000's are too stiff under a small shock load. I would go with adjustables like the RS9000's next time.
 
Macgyver5 said:
Damn!....well.....thanks anyway Cam

no prob, just dont want you to make the same mistake i did, thought i had the right size and then i went wheeling and they turned out to be to short and limited my flexability


:cheers:
 
Is it possible to run these with stock shock mounts? I noticed that you have the Ford mounts I'd like to keep mine stock if I can...
 
Back
Top Bottom