SC Idler pulley

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Trollhole

THC
Supporting Vendor
Moderator
Joined
Mar 6, 2005
Threads
1,565
Messages
21,212
Location
Mauldin, SC
Website
forum.ih8mud.com
I have a customer in the shop for a new radiator. Has a TRD supercharger on it. The grooved idler puller is shot. Called my peeps at Lowe Toyota and they could only find the idle pulley and tensioner assembly. It lists for almost $400. So I went down to my local Carquest and dug through the catacombs. Found the exact same one for $21. Part# 38009 Most likely the tensioner will be the same way.

Just thought I'd put this out there.

image-3788765472.webp


image-1768535245.webp
 
Gates fixed pulley, 38009, available at NAPA. $16.49 last fall
Gates, tensioner pulley (no arm) 38020, available at NAPA. $19.34 last fall

The Gates 38009 is a teensy bit smaller in diameter than the original pulley.
 
Last edited:
Bookmarked for my install & future maint - Mud saves S/C peep ~$350 each in a thread!
 
Toyota has discontinued the assembly so do be sure to not lose any of the bits of the original one when you are changing pulleys out.
 
Which are also identified in post #2 of this thread. Just no snazzy photos.
 
BAZINGA!

They never were "available for sale individually" from Toyota at any time ever. You found a workaround, not quite exact but more than close enough to work. We all benefit.
 
Dayco 89009 is also a direct match for the idler



A1KW_1_20140228468063633.webp
 
The geek in me thinks the Dayco 89009 @murf posted looks to have a bigger inner bearing.

And we all know size matters - so personally I'd grab that especially since the bearing is what we roach in a common drive belt, not the tensioner spring & arm.

@NLXTACY - maybe a killer CNC'ed arm w/ a lifetime type spring, and a Dayco type sealed bearing you support.
Maybe even do it for the 5.7 200LC / Tundra since the supercharger numbers are there in the 200's & Tundras.
Possibly a common part - I've yet to see a 5.7 S/C kit (working on one) but why would 'Yota re-invent the wheel? I'd expect the same 6-rib belt the pulley rides.
 
another option for this is pulley boys, they sell the stock size pulley I believe and it is identical to the trd one. Just got my 2.8 in.

Is it the idler pulley or are you thinking charge pulley (or another vendor for a idler pulley / full arm w/ spring)? :::Seems 2 3/4'was the S/c unit pulley OE sz:::, but I am wrong plenty.

Has it got some big azz bearings or no?

I ask as literally in the last ~2 weeks my best bud had his tension arm (specifically the bearing in the tension pulley for his Audi acc drive belt) - fried itself to the point the bearing has 'rainbow temper heat' in it.

Frankly I'd think the final answer is some sealed SKB bearings that have a finite life you change the bearings alone - like how you buy the exact hose/ends from a local hydro hose shop, and locally that shop has SKB bearings in whatever flavor you want.

I bought the front wheel bearings by the dimensions, not the vehicle application, for my BMW e30m3 - they are HUGE & saved ~$200 that way, despite being the exact sized bearing.

That said, if anyone has the bearing size they need, I have a little 'pull' here in town - shoot me your stuff & I can quote you bearings, shipped to you- my discount is good but not mind blowing, so of you live in Florida or Georgia or Maine, shipping would prob kick it. Never hurts though.

I ask since you & me talked S/C pulley sizes a long, long time ago - so mebbe since we are so 'OG' we both are at the point we forget plenty. Really more a compliment than not.
 
The geek in me thinks the Dayco 89009 @murf posted looks to have a bigger inner bearing.

And we all know size matters - so personally I'd grab that especially since the bearing is what we roach in a common drive belt, not the tensioner spring & arm.

@NLXTACY - maybe a killer CNC'ed arm w/ a lifetime type spring, and a Dayco type sealed bearing you support.
Maybe even do it for the 5.7 200LC / Tundra since the supercharger numbers are there in the 200's & Tundras.
Possibly a common part - I've yet to see a 5.7 S/C kit (working on one) but why would 'Yota re-invent the wheel? I'd expect the same 6-rib belt the pulley rides.

Someone else was asking me about this but the numbers would be just way too small. But if I need one for my own truck then I'd likely make a batch out of necessity.
 
Back
Top Bottom