Quick bushing recommendation

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

@Beej look at the post directly above yours. Thats why. Was that a joke?

For all 4 rear bushings this is how it breaks down:

Parts Store Brand: 25x4= ~$100
OEM ~$45 per from beno x 4 = 180, lets add 20 bucks in shipping... = $200

Ok so lets say by some miracle that the parts store bushings how last you 5 years, OEM will easily pass 10 years and lets say that they need replacement at 15 years (even though plenty of people get 20 out of them).

So 200 bucks for 15 years for OEM and you have to do the service once. Or over the same 15 years you spend $300 for parts store bushings and you have to do the service 3 times. And you are frustrated more because your rigs steering is all wonky more of the time and you are always 'fixing' it. Gotta think long term, save yourself the headache.
 
Last edited:
Hey,

It continues to amaze me this discussions.....you guys are really shopping at wrong places.....

I fixed some vibration and knuckle leaks on my LX450 more than 8 mounts ago. Beside the knuckle rebuild kit I bought front control arms bushings OEM toyota:

these are the order details concerning the bushings: (the order contained some other parts...)

SILENTBLOCK Toyota 4870260050 Ship in 5 days (approx) 20.54 4 82.16 0.30 Shipped
SILENTBLOCK Toyota 4806160010 Ship in 5 days (approx) 20.66 2 41.32 0.30 Shipped

So OEM front bushing 4870260050 cost $20.54, and 4806160010 cost $20.66 these are OEM Toyota. The total for the bushings is $123.48 If shipped alone the cost would have been somewhere in the $25 to $30 range so the total including shipping would be (worst case scenario...) $148.48 to $153.48 !!!!

please see here: 4870260050, 4806160010 - Search Results - Search for Genuine Parts - Amayama Trading Co.

so ... end of story....


regards
 
Hi Guys, here we are just at about 6 months.
Thought I would follow up with an update. Today is perfect for that since the truck was on a lift getting a new exhaust section put in.
I was able to stand under the truck and visually inspect all of the bushings especially the front control arms. I am happy to report all bushings are in great condition! I took some pictures but its hard to really get up in there with great clarity.

What kind of usage has your LC seen in that time? A good amount of daily use, a deer hunt in southern AZ, an elk hunt in northern AZ, a Christmas tree hunt, a few camping trips and a recent ski trip.
During one of my hunts I hit a stump causing a right front tire blow out, the impact was so severe I twisted my steering box sector shaft. Because of the rebuild process, my Truck was down for a month. I also replace my old tires with new 34". The rig is outstanding and I stand by my recommendation from post one.

Images of the bushings are pretty big so i'll just leave the links...
http://i.imgur.com/undefined.jpg

http://i.imgur.com/agFYDVU.jpg

http://i.imgur.com/7Tjondc.jpg

http://i.imgur.com/YaLEbbj.jpg


dxpVNuG.jpg
ZFOS8BY.jpg


Bumper went to the powder coater so you can really see the power steering heat sink

ckaAzGL.jpg


Bumper back from the powder coaters and the new fog lights wired in.
 
@Beej look at the post directly above yours. Thats why. Was that a joke?

For all 4 rear bushings this is how it breaks down:

Parts Store Brand: 25x4= ~$100
OEM ~$45 per from beno x 4 = 180, lets add 20 bucks in shipping... = $200

Ok so lets say by some miracle that the parts store bushings how last you 5 years, OEM will easily pass 10 years and lets say that they need replacement at 15 years (even though plenty of people get 20 out of them).

So 200 bucks for 15 years for OEM and you have to do the service once. Or over the same 15 years you spend $300 for parts store bushings and you have to do the service 3 times. And you are frustrated more because your rigs steering is all wonky more of the time and you are always 'fixing' it. Gotta think long term, save yourself the headache.

:doh:Should have specified. That price was for OEM bushings. Same bushings as the dealer for half the price ;)

Check Amayama and check Partsouq.
 
:doh:Should have specified. That price was for OEM bushings. Same bushings as the dealer for half the price ;)

Check Amayama and check Partsouq.
don't talk back to them! Who are you!? You couldn't possibly know anything more than them! Lol, I have bought Toyota parts from these guys too, it's hilarious to see how some of these guys act. Can't take sarcasm, can't take the least bit of criticism...attitude like nobody could possibly know more than them. Then they read a post and reply with an incoherent rant about how you're the idiot. A lot of that going on lately. Glad to see some of us remain civil, level headed, thought out and base our posts on facts not feeling.
 
What kind of usage has your LC seen in that time?

Well.......................

Since you asked, and since I keep track of silly things like this, I thought I might take you up on this quasi-challenge of yours.

Before I get into this, I will mention that I do volunteer work for the Forest Service. I go out and inspect routes constantly, some of which is more technical than the popular challenge trails many books list as local to the Phoenix/Arizona region. I also enjoy the popular trails, as well as the typical dirt road. You're local to me, so any time you'd like to go out, send me a PM. But be ready for some scratches on your rig.

All of this is done with GPS, which runs from air down to air up on every trip I take. So it's giving me the total for dirt miles the rig is clocking. This type of statistic has always interested me, but is also helpful at pointing out to Forest just how much abuse a vehicle takes when doing work for them. Naming the tracks makes it easy to separate volunteer time from fun time, but for the purposes of this I will leave it all in a singular category.

It's also worth mentioning that this does not take into account the fact that it is also my daily driver; so things like those Christmas gigs I had in Sun City West and East Mesa were all in the Land Cruiser as well. Plus driving to all these damn trails before even clocking the dirt miles.

Going back to the beginning of August gets me 1,921.3 miles of dirt. I was curious if I counted July also, which puts me at 2,211.72 miles. I really don't get out enough. :rolleyes:

This includes:
-A trip to Moab
-A few different days playing in big rocks, one of which made my radius arm mounts a little less attractive than yours (pic below)
-Playing around up near a mine which may have been too aggressive for @DSRTRDR 's LX because the the rear flare got ripped off (sorry, Claudia!)
-Trail repair days
-Camping trips
-Further destroying clearancing my rocker panels (I'll get around to square tube or something one of these days)
-Seriously fxxxing up a tie rod (pics attached, a rock got stuck between it and the axle)
-Seeing some amazing stuff

I recently put new factory bushings in my radius arms, which are holding up quite well (they have about 500-600 miles of dirt on them so far). But I wonder how yours would have held up under similar circumstances? Hard to tell since I do every few weeks what takes you half a year.

Oh, I also didn't twist my sector shaft on a stump because I try to drive the truck around those sorts of things.

Pics related.
IMG_0577.webp

FB1F26F6-092B-4F68-AB76-4B9FCD516433.webp

E8289657-ADE8-45EB-9287-CE7EFC75147E.webp
 
don't talk back to them! Who are you!? You couldn't possibly know anything more than them! Lol, I have bought Toyota parts from these guys too, it's hilarious to see how some of these guys act. Can't take sarcasm, can't take the least bit of criticism...attitude like nobody could possibly know more than them. Then they read a post and reply with an incoherent rant about how you're the idiot. A lot of that going on lately. Glad to see some of us remain civil, level headed, thought out and base our posts on facts not feeling.

This :poop: directed at me?! Haha If so I fail to see how my post was incoherent or accusatory. But whatever. :barefoot:

Where ever you get your OEM parts from is your deal, I happen to get all of mine through the dealer at cost due to club discounts and relationships I have with them (which end up being about half the list price so...). I don't like trusting unknown internet deals because more often than not it turns out to be an OE part in a toyota box. If you have different results then great, stick with what you like. To each their own. What matters is that the bushings are OEM.

::incoherent rant over:: :rofl:
 
Hi Guys, here we are just at about 6 months.
Thought I would follow up with an update. Today is perfect for that since the truck was on a lift getting a new exhaust section put in.
I was able to stand under the truck and visually inspect all of the bushings especially the front control arms. I am happy to report all bushings are in great condition! I took some pictures but its hard to really get up in there with great clarity.

What kind of usage has your LC seen in that time? A good amount of daily use, a deer hunt in southern AZ, an elk hunt in northern AZ, a Christmas tree hunt, a few camping trips and a recent ski trip.
During one of my hunts I hit a stump causing a right front tire blow out, the impact was so severe I twisted my steering box sector shaft. Because of the rebuild process, my Truck was down for a month. I also replace my old tires with new 34". The rig is outstanding and I stand by my recommendation from post one.

Thanks for the follow up, glad they are working for you. Clean rig too!
 
TLDR, past the word "challenge" which is kind of weird but whatever. I was asked to substantiate my recommendation with an update.
I added more context to give people a better idea of what amount abuse these bushings got and prove they are a better OEM alternative than most OE bushings.
 
off topic: are those 295's on your rig? I like the look :cool:
 
Glad to see you may have found alternative.
The front axle control arm bushing are stressed the most under hard articulation. The rear of the front control arm does not see as much stress as front pair of bushing. If you are not seeing a lot of that type of action one would guess any and all bushing life would be extended.
Will look forward to the next 6 months report

Pictured below my short lived (less than 6 months) non-OEM bushing under articulation. Since replacing with OEM my LC still see the same type of use and the OEM look to be good shape.


img_7308-jpg.892135
 
Back
Top Bottom