||| Official YT For Sale/Trade/Wanted Thread |||
- Thread starter mopar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
wow thats really nice!
I'm looking for some beadlocks 15x10 , 6x5.5
Tom get some generic wheels and Great Lakes weld on bead locks. I buddy just did this and they came out awsome. Probably one of the cheapest routes.
I need five 4-5 16" wheels for my New FJC. Stock FJC, TRD, Sequoia, or maybe even from an FJ80. I'm cheap, but have cash primarily and/or willing to trade sumthin.
I have four from a 2007 Tacoma. They only have around 3k miles on them before I switched to alloys. $150 and they're yours. Also interested in trades for 40/60 series parts, winches, etc...
i am interested if it is still available.
315 duratracs for sale with wheels
https://forum.ih8mud.com/tires-whee...r-duratracs-80-series-wheels.html#post6462312
https://forum.ih8mud.com/tires-whee...r-duratracs-80-series-wheels.html#post6462312
Pretty sure Tacoma doesn't fit on the FJC, but there is one way to tell for sure. Where are you located? PM mea picture if you can. Larry
I got a couple v8 converstion parts for sale. will post them here before i stick them on the big board in a few days. all parts are new and ver been used.
first is a SOR v8 fan shroud
Specter Off-Road Land Cruiser Parts - Page 330 Land Cruiser V-8 Conversions
I decided to go in a different direction for my cooling needs this is a really nice quality shround really beefy.
I paid like 40 to have it shippind and thats what they want to return it so I figure to sell it here I do have all the original packing.
$200
a Man-a-fre cable pedal conversion (they will not take returns) it cost me way to much
will take $80 for it
Pedal and Cable Conversion Kit
V8 Transfercase Crossmember Mount -
Fits 1958-7/80 40 Series chassis - Use as a rear motor mount when installing a V8 - Uses studs to attach to the rear of the transfercase - Requires welding to install - Comes with crossmember, weld on frame scab plates, brackets, mounts & hardware
Specter Off-Road Land Cruiser Parts - Page 330 Land Cruiser V-8 Conversions
SOR sell is it for 200 I will take $150
I got more stuff but willstart with these three. will post up to the big board this week end if I do not get any bites
first is a SOR v8 fan shroud
Specter Off-Road Land Cruiser Parts - Page 330 Land Cruiser V-8 Conversions
I decided to go in a different direction for my cooling needs this is a really nice quality shround really beefy.
I paid like 40 to have it shippind and thats what they want to return it so I figure to sell it here I do have all the original packing.
$200
a Man-a-fre cable pedal conversion (they will not take returns) it cost me way to much
will take $80 for itPedal and Cable Conversion Kit
V8 Transfercase Crossmember Mount -
Fits 1958-7/80 40 Series chassis - Use as a rear motor mount when installing a V8 - Uses studs to attach to the rear of the transfercase - Requires welding to install - Comes with crossmember, weld on frame scab plates, brackets, mounts & hardware
Specter Off-Road Land Cruiser Parts - Page 330 Land Cruiser V-8 Conversions
SOR sell is it for 200 I will take $150
I got more stuff but willstart with these three. will post up to the big board this week end if I do not get any bites
good news and bad news Wilma is alive again the v8 is in and running a few things to finish up but whe will ride again. bad news is I got my mechanics bill I I need to sell parts asap. so off they go to the big board, no on seemed interested anyway.
JP do you mind telling us the cost of the swap?
I gave up one of my children.
total I think I have just under 4k into it.
- $700 3 year old 3000 mile crate engine
- 500 for adapter kit (normally 1400 so that was a deal)
- 2 k for install and a bunch of other stuff. (wilma is a bit tighter mobile now)
- the rest is a bit fuzzy cause I got a bunch of chit to sell and return but in the end it will be right around 4k. But I hope to off set a 1500 - 2k in the sale of my engine and various parts so I geuss the total cost is more like 2k or the mechanics labor.
He only worked on it when I was down there but it learned me alot
total I think I have just under 4k into it.
- $700 3 year old 3000 mile crate engine
- 500 for adapter kit (normally 1400 so that was a deal)
- 2 k for install and a bunch of other stuff. (wilma is a bit tighter mobile now)
- the rest is a bit fuzzy cause I got a bunch of chit to sell and return but in the end it will be right around 4k. But I hope to off set a 1500 - 2k in the sale of my engine and various parts so I geuss the total cost is more like 2k or the mechanics labor.
He only worked on it when I was down there but it learned me alot
4 Speed H42 and Split Transfer Case $250
Got a long H42 and split case from an '85 FJ60 for sale. $250 for both. I've got it posted in the regular classifieds but figured it would sell better here because of the weight. Lots of other FJ60 parts here, too.
https://forum.ih8mud.com/sale-parts/467657-h42-splitcase-1985-fj60.html
Got a long H42 and split case from an '85 FJ60 for sale. $250 for both. I've got it posted in the regular classifieds but figured it would sell better here because of the weight. Lots of other FJ60 parts here, too.
https://forum.ih8mud.com/sale-parts/467657-h42-splitcase-1985-fj60.html
Wanted
Anyone have a 40 upper dash pad available that they are interested in selling? Mine is so cracked and split that I don't even think I can put a cover on it
. This is for a 77, and per SOR, I think a 72 to 82 will fit. Thanks
Anyone have a 40 upper dash pad available that they are interested in selling? Mine is so cracked and split that I don't even think I can put a cover on it
. This is for a 77, and per SOR, I think a 72 to 82 will fit. Thanks
I gave up one of my children.
total I think I have just under 4k into it.
- $700 3 year old 3000 mile crate engine
- 500 for adapter kit (normally 1400 so that was a deal)
- 2 k for install and a bunch of other stuff. (wilma is a bit tighter mobile now)
- the rest is a bit fuzzy cause I got a bunch of chit to sell and return but in the end it will be right around 4k. But I hope to off set a 1500 - 2k in the sale of my engine and various parts so I geuss the total cost is more like 2k or the mechanics labor.
He only worked on it when I was down there but it learned me alot
Seems reasonable to me with that much outside work. Must be a BIG difference in the power?
Anyone have a 40 upper dash pad available that they are interested in selling? Mine is so cracked and split that I don't even think I can put a cover on it
Sorry, no spare. I was reading a link the other day that they may be available new from Toyota. Naturally that isn't cheap.
For Sale built CDN 101 1/4 trailer $3700
Kind of sad to do this but I got bills to pay and hopefully this will stave off selling my cruiser a little longer seems my wife thinks that catholic school is more important. And with a wife and two girls camping just hasn’t seem to have caught on.
What I got
I picked up a Canadian spec 1/4 ton trailer a few years back that was in really good condition. it was built in 1993.
I swapped the hubs from the 5 lug to the cruiser 6 lug, Sprung it over, Painted it several times; It was my test bed for colors I was thinking about painting my cruisers. Now it is a 60's Toyota color called River Blue that my current cruiser is painted. I put a tail gate in the back as well as made stabilizer feet so when the tent is on top it is level and will not flip. I put a kick down wheel extension on the front to help roll it around and the height is adjustable so as to help level it for sleeping in the tent.
The tent is a Mombasa and is in good condition. I store it in my dry climate controlled basement and it literally gets used once a year. I built a removable rack top with 4 thule spreader bars that I welded together. The tent mounting only calls for 2 but I put a second pair on the outsides so the corners of the tent were supported as well.
I have a brand new oiled canvas tie down cover for the trailer without the tent on it as well. Great for using the trailer to haul mulch.
I used this trailer to transport car parts move my brother in law twice, camp and loads of gravel. I bed lined the floor but it has seen use. And has a few dents here and there. But nothing structural by any means.
The wheels are widened OEM hub cap wheels that were widened by Stockton wheel to 16x8 with 3.5 bs. They are painted grey and have hub caps. The tires are new trxus 255/85r16’s (about a 32.6 x10.7) size tire.
This trailer is set up for camping and to be used for small loads. It has been a great trailer and I am not real sure I want to sell it. I will try and get pics with the tent on it. I do not want to split them up right now. I have a link to some of the build up in my sig line.
https://forum.ih8mud.com/trailer-tech/150460-another-cdn-m101-trailer-build.html#post2076689
Looking for $3700
Kind of sad to do this but I got bills to pay and hopefully this will stave off selling my cruiser a little longer
seems my wife thinks that catholic school is more important. And with a wife and two girls camping just hasn’t seem to have caught on.What I got
I picked up a Canadian spec 1/4 ton trailer a few years back that was in really good condition. it was built in 1993.
I swapped the hubs from the 5 lug to the cruiser 6 lug, Sprung it over, Painted it several times; It was my test bed for colors I was thinking about painting my cruisers. Now it is a 60's Toyota color called River Blue that my current cruiser is painted. I put a tail gate in the back as well as made stabilizer feet so when the tent is on top it is level and will not flip. I put a kick down wheel extension on the front to help roll it around and the height is adjustable so as to help level it for sleeping in the tent.
The tent is a Mombasa and is in good condition. I store it in my dry climate controlled basement and it literally gets used once a year. I built a removable rack top with 4 thule spreader bars that I welded together. The tent mounting only calls for 2 but I put a second pair on the outsides so the corners of the tent were supported as well.
I have a brand new oiled canvas tie down cover for the trailer without the tent on it as well. Great for using the trailer to haul mulch.
I used this trailer to transport car parts move my brother in law twice, camp and loads of gravel. I bed lined the floor but it has seen use. And has a few dents here and there. But nothing structural by any means.
The wheels are widened OEM hub cap wheels that were widened by Stockton wheel to 16x8 with 3.5 bs. They are painted grey and have hub caps. The tires are new trxus 255/85r16’s (about a 32.6 x10.7) size tire.
This trailer is set up for camping and to be used for small loads. It has been a great trailer and I am not real sure I want to sell it. I will try and get pics with the tent on it. I do not want to split them up right now. I have a link to some of the build up in my sig line.
https://forum.ih8mud.com/trailer-tech/150460-another-cdn-m101-trailer-build.html#post2076689
Looking for $3700
Flipper