Larry, I can Mudship it.
||| Official YT For Sale/Trade/Wanted Thread |||
- Thread starter mopar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Ya know, I might be able to drop it in Duxbury actually. Dunno if it'll fit in my Prius but the seats do fold down so worth a try. I'm in the dux area Mondays, Tues and Thurs.
from what time? I'm working in the city, and you know what the evening commute is like.
Works for me if you guys can work it out. But, there would have to be more beer for Bob and then how do I MUd Ship the 12 pack back to Mass and be sure it arrives safely
The 12 pack will be just fine with me transporting it
Few things in the garage.
For 80 series. Brand new misordered when I had an FJ-62: Both exhaust down pipes w/ catalytic converters. Fits 90-92 80 series with 3FE. $300
For FJ40. Spector Offroad, aluminum diamond plate rear quarter panels. Never installed. $75
For 80 series. Brand new misordered when I had an FJ-62: Both exhaust down pipes w/ catalytic converters. Fits 90-92 80 series with 3FE. $300
For FJ40. Spector Offroad, aluminum diamond plate rear quarter panels. Never installed. $75
Last edited:
PM'd you on the FJ Springs.
The 12 pack will be just fine with me transporting it
PM me your address and I can drop it off
anyone interested in swapping a set (4) of 50%ish 37x13-15 boggers for a set of Q78-15 swampers in about the same or better condition? i can make the boggers work on my truck, but the Q-78s are what i really want and would fit with no work.
the boggers are low in the center because they were used as street tires but have great tread left towards the sides and they are not chunked at all. i'm in syracuse and can split the drive distance.
the boggers are low in the center because they were used as street tires but have great tread left towards the sides and they are not chunked at all. i'm in syracuse and can split the drive distance.
I have for sale:
a 60 series power steering pump
2- 40 series master cylinder units (2 reservoir, both need rebuilds.)
Original Fj55 round red reflectors for the rear, excellent condition
Fj40 hood hinges (rebuilt, like new)
brand new speedo cable for 2F/4speed set up
Brand new OEM heater motor
I know I'm supposta post a price but I have no idea what they are worth.
a 60 series power steering pump
2- 40 series master cylinder units (2 reservoir, both need rebuilds.)
Original Fj55 round red reflectors for the rear, excellent condition
Fj40 hood hinges (rebuilt, like new)
brand new speedo cable for 2F/4speed set up
Brand new OEM heater motor
I know I'm supposta post a price but I have no idea what they are worth.
Last edited:
BulletHead
Village Idiot
I'll help you John, the 60 pump isnt worth jack, but I'll give you $5 for it.
I'd go another 12 pack and raise it $10
You kids are funny. I'm sure I'll regret selling the PS pump but it's gonna go soon one way or another.....
The PS pump in my '84 sounds like my wife when more cruiser parts show up at the door. I sure could use a working pump though
posted this up to the main classified section but figured I would post it here as well
Would love to keep it for the 40 project I have always dreamed about but I need the money more to pay for the cruiser I currently have. So here is what I got; a decent running 2f that had about 115,000 miles on it before I got it from the donor 87’ fj60. I am still running the tranny t-case from that vehicle with zero issues. The truck was stock and original tires suspension so it was never run hard. I put it in my fj45lv 3 years ago and it did not hit the road until two years ago and it fired right up. I just pulled out of my 64 fj45lv. It was fine moving my 6500lb. cruiser around until I started towing my trailer and it just didn't have the hp on the highway. The engine and everything from the engine mounts to fit the later model 2f in a fj40 frame, to the clutch disk 3F bell housing are in there as well.
I would love to unload it as a whole package deal, in that I am in the midst of a v8 swap and my time (what time I am permitted by the
) is to work on the v8 in that my lv is my daily driver. Right it and all its parts sit in my CDN M101 trailer so it would be easily transported anywhere in the New England area, just need an engine hoist on your end. You can see pictures of said trailer in the link in my sig line for my trailer build. As well as you can see when and why and how I used most of the parts I bought for the engine in my Wilma build thread also in my sig line.
So a quick tally of parts: if it does not sell whole I will part it out but would prefer to sell it whole so I am not going to sell individual parts just yet. anyway I figure since every bolt on part is new in the last 2 years and has less than 5000 miles on them I figure 1/2 to 2/3 price on them still gets my somewhere around 2k in parts. so I am asking $1100 for the engine complete.
Here is a list of parts that I may later use to sell individually but it gives you a good idea of what is included.
-new fuel pump
-new ps pump
-new water pump
-new starter
-Jim C. rebuilt Car and Dizzy (desmogged set up as well as air pump bracket pulley and air rail allen head plugs)
-Early 80’s 2f fj40 air cleaner matched up the stock fj60 aircleaner does not have the same look as a fj40 air cleaner.
- New radiator
- Rad hoses
- Ceramic headers from SOR there is some spot rust on these but otherwise in decent shape.
- Clutch was new at time of put back together.
- fj40 engine mounts that set up this engine just right in an fj40 frame.
https://forum.ih8mud.com/sale-parts/465475-87-2f-sale.html#post6436215
Would love to keep it for the 40 project I have always dreamed about but I need the money more to pay for the cruiser I currently have. So here is what I got; a decent running 2f that had about 115,000 miles on it before I got it from the donor 87’ fj60. I am still running the tranny t-case from that vehicle with zero issues. The truck was stock and original tires suspension so it was never run hard. I put it in my fj45lv 3 years ago and it did not hit the road until two years ago and it fired right up. I just pulled out of my 64 fj45lv. It was fine moving my 6500lb. cruiser around until I started towing my trailer and it just didn't have the hp on the highway. The engine and everything from the engine mounts to fit the later model 2f in a fj40 frame, to the clutch disk 3F bell housing are in there as well.
I would love to unload it as a whole package deal, in that I am in the midst of a v8 swap and my time (what time I am permitted by the
) is to work on the v8 in that my lv is my daily driver. Right it and all its parts sit in my CDN M101 trailer so it would be easily transported anywhere in the New England area, just need an engine hoist on your end. You can see pictures of said trailer in the link in my sig line for my trailer build. As well as you can see when and why and how I used most of the parts I bought for the engine in my Wilma build thread also in my sig line.So a quick tally of parts: if it does not sell whole I will part it out but would prefer to sell it whole so I am not going to sell individual parts just yet. anyway I figure since every bolt on part is new in the last 2 years and has less than 5000 miles on them I figure 1/2 to 2/3 price on them still gets my somewhere around 2k in parts. so I am asking $1100 for the engine complete.
Here is a list of parts that I may later use to sell individually but it gives you a good idea of what is included.
-new fuel pump
-new ps pump
-new water pump
-new starter
-Jim C. rebuilt Car and Dizzy (desmogged set up as well as air pump bracket pulley and air rail allen head plugs)
-Early 80’s 2f fj40 air cleaner matched up the stock fj60 aircleaner does not have the same look as a fj40 air cleaner.
- New radiator
- Rad hoses
- Ceramic headers from SOR there is some spot rust on these but otherwise in decent shape.
- Clutch was new at time of put back together.
- fj40 engine mounts that set up this engine just right in an fj40 frame.
https://forum.ih8mud.com/sale-parts/465475-87-2f-sale.html#post6436215
BulletHead
Village Idiot
if anyone's looking for a 40 with a 350, please PM me, i have one that im thinking of selling, its a small project at this point, frame-off resto and motor swap is complete.
For sale:
35"x12.5 16 maxxis trepador (4) 16x8 procomp aluminum wheels (4) good condition
$1,000.00 obo
pics in "my garage"
35"x12.5 16 maxxis trepador (4) 16x8 procomp aluminum wheels (4) good condition
$1,000.00 obo
pics in "my garage"
What are you going with for tires next?
3
37" pitbull rockers
i won a gift certificate for 25% off a purchase of pitbull tires at the Fall Gathering.. if u want it u can have it.