I will get the other pics. Belongs to my friend in hickory. We raced the truck in 2017 and 2018. The truck is in hickory. So built and tested. Anything under 20 and I am buying it.
Official ONSC member buying/selling thread (21 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Thanks, I will message you my email and number for you or owner.
Perfect. Thank u. We want some one that will love it. Does front of Daniel like a cake walk.
A different type of cruiser equipment, Chariot CX2, for those future or current parents who want 1 trailer which comes with all accessories to modify it from single kid to two kids, from bike trailer to jogger to a mall stroller. You can even buy a body harness to pull it and/or skis to use in winter time at the ski slopes. We used it at bike trails, hiking trails, and the ocean. When traveling in airports, zoos, and Disney you and your children will be the envy of everyone because it is easy to carry everything. All attachments stored on it and it will compact to lay flat. We found hanging it off a bike rack was easiest & fastest way to transport. Freshly cleaned, new tubes in tires and greased axles. We purchased it with all the accessories including 2 attachment hooks for 2 bikes for $1300. ONSC price $800.
still looking a fj60/62 factory 15" wheel to mount a spare tire on. doesn't have to be pretty.
Thanks
Thanks
Looking for a 100 series hitch and bolts. Anyone? Thank you.
Depends on the year of the 100 for the bolts - the rear bolts can be M14 or M12 - if you need the M12 I can give you a deal on those as I ordered from @TRAIL TAILOR but all of the bolts I needed were M14....
99. Not sure.
Kayline Fastrac soft top for an FJ40 for sale.
I don't think these tops have been made for quite a while. The fabric on this top is in good condition. I have only found one tear, about one inch long. It has the two piece doors also. Doors are in great condition. All of the windows are hazed over. I don't know if there's a way to clean or replace the windows. Most of the hardware is there, but a few pieces are missing.
I really don't know what the top is worth, but will start at $300.
I don't think these tops have been made for quite a while. The fabric on this top is in good condition. I have only found one tear, about one inch long. It has the two piece doors also. Doors are in great condition. All of the windows are hazed over. I don't know if there's a way to clean or replace the windows. Most of the hardware is there, but a few pieces are missing.
I really don't know what the top is worth, but will start at $300.
Last edited:
I can get it to the xmas party easily. Might be able to get it to someone in GSO on Tues 11/26.
40LandCruising
Anderson
Looking for some inexpensive 15” wheels for my pickup, since the slot mags I bought are no good now I need something just to get back going down the road.
Check a few posts back for something from @Simcoe
40LandCruising
Anderson
I messaged him!
Mtbcoach
Moderator
’97 FZJ80 For Sale.
I’m selling our FZJ80 40th edition I bought for our daughters to be their first car. You can see the evolution on the build thread
Builds - Mtbcoach's Livestrong II build...
Its time for me to make a build thread for my Livestrong II build, moving from the '07 GSJ15 to our '97 FZJ80. For those not familiar with my FJC build, check the link in my sig or this one, it might help understand how I don't really do things lightly...
forum.ih8mud.com
The update would be getting the front axle and transfer case installed. As it sits now, half the axle swap we started 3/17 is done.
HAMOM request March 4
Request for HAMOM March 4th at my home in Cary. I'll provide food and beverages from start to finish, will have my smoker and grill hot and full, garage fridge filled with cold drinks. Send me a PM for address if you don't have it. HAMOM goal - perform axle & transfer case swap on my '97...
forum.ih8mud.com
The good...
160k miles
Head rebuilt/magnafluxed/new head gasket/baselined all hoses
On Board Air mount and pulley installed (Great Lakes version)
Fresh cat/Magnaflow routed over frame
Front e-locker axle/knuckle rebuilt w/Aisin hubs/original Longfields/Yukon 4.10’s/hubs/calipers rebuilt
Rear axle stock (giving extra after swap to sell)
Rear e-locker axle rebuilt (need to finish e-brake/hub/calipers, install Yukon 4.10 gears, install onto truck)
OME J lift
OEM Snorkel
Michelin XL 9.00R16’s (4 near new, spare used) 36.5 x 9’s
HF1A transfer case rebuilt with Marlin 3.12 low gear (HF1A does not have viscous coupler)
HF2A transfer case take out
Rebuilt driveshafts (rear lengthened to account for above transfer case w/o viscous couple nose cone)
Fender flare delete, holes welded/primed
Slee Short bus bumper front w/Warn 9.5k w/synthetic
4x4 Labs rear w/custom gas can/cooler/fridge-freezer basket/tire carrier/Hi-lift mount
Interior has fresh leather 1st and 2nd row, 3rd row in very good shape (with heated seat inserts installed but not wired)
Interior stripped and sprayed with Lizard Skin Ceramic (not roof)
LED interior light kit including dash lights
Double DIN Kenwood w/Garmin GPS (surely software is outdated)
The bad...
Half the axle swap done. I don’t have the energy nor resources to finish. Interior panels out prepping for wiring speakers/cb/antennas/etc.
Needs fresh fuel and battery to fire, install rear driveshaft and drive away in 2wd
Finish axle swap, install both shafts and away you go.
$10k...takes all things related to this rig for a new buyer to finish and enjoy.
View attachment 2114559View attachment 2114564View attachment 2114565View attachment 2114566
Last edited:
Either is great. No hurry! And thank you.
No problem. It’ll be easier to get it to the Xmas party. I’ll catch up with @Tuite whenever is convenient for him.
40LandCruising
Anderson
PRICE DROP: Mud Price $5,900
Someone buy this thing, it’s a solid rig.
forum.ih8mud.com
Someone buy this thing, it’s a solid rig.
For Sale - SOLD Winston-Salem NC - 1994 FZJ80
I have a 1994 FZJ80 for sale. Price Drop: $5,900 OBO 233K mi I purchased this 80 in January of 2018 bone stock. I drove it until November of 2018 when the HG failed catastrophically and destroyed the entire engine. I had a used engine put in it that came out of a truck with similar miles to...
forum.ih8mud.com
