Official ONSC member buying/selling thread

[LDowney]

Wow. Any idea if these will fit a 70 series from a bolt pattern stand point? I have a 1988 BJ73. I need tires and would like to use those wheels as well. Thank you.

Bolt pattern: absolutely yes.
Tie rod /caliper clearance: If they are disk brake 15" steelies, yes.

 

[R.K.]

FJ40 short jump seats for sale. Removed from a ‘75 model. Seats are in pretty good condition, but do need a couple of weld repairs.

Located in Roxboro, NC

SOLD

 

[Scott11cruiser]

I'm preparing for a diff gear swap, looking for a rear locker to install while I'm in there. Application is semi float '40 rear axle.

 

[R.K.]

Specter Off-Road UB40 fender flares for an FJ40 for sale. Flares are brand new, never installed nor drilled. They are warped, but should straighten out in the sun or with heat.

$150

 

[onemanarmy]

Long shot.....but anone have a good Fj55 radiator laying around/part of a projet that I can borrow?

Chasing some overheating issues and want to verify I need to buy a new rad

(or recommend a rad shop in the triangle area?)

 

[R.K.]

Long shot.....but anone have a good Fj55 radiator laying around/part of a projet that I can borrow?

Chasing some overheating issues and want to verify I need to buy a new rad

(or recommend a rad shop in the triangle area?)

I don’t have a 55 radiator, but Bull City Radiator in Durham isn’t too far from you.

 

[S.CarolinaFZJ80]

FREE - 80 series fuel tank.
Does not have the dreaded split on the top
BUT does need to be repaired. Hole for the OEM SubTank float switch was removed and needs patching.

 

[lastresort576]

Any chance someone in the Raleigh area has a good AC compressor for a '97 80 incase year matters, kicking around they no longer need?

 

[R.K.]

Does anyone have a couple of stock late FJ40 or FJ60 steel spoke wheels they’d get rid of?

 

[Malleus]

Does anyone have a couple of stock late FJ40 or FJ60 steel spoke wheels they’d get rid of?

You mean wagon wheels? I have four. They're not stock, though. I've never seen stock spoke wheels.

 

[roadstr6]

You mean wagon wheels? I have four. They're not stock, though. I've never seen stock spoke wheels.

R.K. is looking for these:

Or these:

Late 40 (‘79-‘83) or 60 series spoke wheels. Same wheels but painted on the 40 series trucks and chrome on the 60 series trucks.

 

[dloLC007]

Set of 4 Method 703 17" 5x150 +35 rims. Matte Black. Still has the white grease dried on the rims. No scratches. $1000 Greensboro, NC

 

[jfz80]

Anyone have a lead on a roll bar and 3pt seatbelts for a late model 40? (1982) Unsure if any differences in rollbar design over the years.

Edit: Added square bezel to the list

 

[jfz80]

USDS inner fender for 80 series
(The one a leaky battery will rot out)

Bought from AJR for $100
Yours for $50

80 series front calipers (2)
Good for rebuild or core charge
$25

 

[Coop1979]

Does anyone need headrests for a LX 470, or the 3rd row seats? In pretty great condition.

Came out of a 1999 model.

Located in Charlotte.

View attachment 3503761

View attachment 3503762

Posting these again. Anybody want them?

 

[greenseaman]

I’m looking for an inexpensive set of 16x8 wheels that will work on my 1985 4Runner. I have read that the backspacing need a to be 3.5” so they don’t rub on frame and tie rods… Does anyone know if this is true? It’s a solid axle and I’ve been able to find some with 4.0” backspacing and -12 mm offset, but didn’t know if they’d work. I really don’t wanna use spacers! Thanks! Or looking for a good set of 33”x10.5”r15 mud tires to fit my current wheels!

 

[jfz80]

I’m looking for an inexpensive set of 16x8 wheels that will work on my 1985 4Runner. I have read that the backspacing need a to be 3.5” so they don’t rub on frame and tie rods… Does anyone know if this is true? It’s a solid axle and I’ve been able to find some with 4.0” backspacing and -12 mm offset, but didn’t know if they’d work. I really don’t wanna use spacers! Thanks! Or looking for a good set of 33”x10.5”r15 mud tires to fit my current wheels!

Scott have you considered/tried 80 series wheels? Cant recall if they are 4 or 4.5 BS at the moment.

 

[Hokie LX]

I have a good friend who isn't on Mud but has a '97 taco and is looking for a set of the 98-2000 fiberglass flares for his truck. Anyone have a set or a lead on a set?

 

[rugbypike11]

I have a set of 5 LX450 black powdercoated wheels. They have some dings on them, and one of them has a pretty large defect (see pictures), but they are in overall decent shape if you want to have black wheels but keep a stock 80 series look. I thought they looked pretty good on my LX450 before I sold it, and I was planning to get new tires for them to run two sets of tires on my 40th Anniversary Edition, but then I sold my 40th Anniversary Edition so I no longer need these wheels. If I remember correctly, I purchased them for $700 a few years ago. I'm starting the listing for them at $600 for all 5 wheels if you take the away the old tires with them (The tires are BFG KOs with date code from 2012 and some visible rot, so they're not good for anything other than maybe a temporary roller).
Included pictures of each wheel below, and more closeup pictures of the dings and the bigger defect on iCloud: iCloud Photo Sharing - https://www.icloud.com/sharedalbum/#B1e5nhQSTGeYYAr

View attachment 3990987

View attachment 3990988View attachment 3990989View attachment 3990990View attachment 3990991

Price reduction to $500 for local pickup. Also, one of the five tires is a KO2 with a date code from early 2019, so it should still be good as a spare. As previously noted, the other four tires are garbage.

I'm heading out of town on Friday, and I'll get the tires taken off the wheels when I get back if there are no local takers.

 

[greenseaman]

Scott have you considered/tried 80 series wheels? Cant recall if they are 4 or 4.5 BS at the moment.

From my research, they may be 4.25 or 4.5 depending on the year 80. Did you have some FZJ80 wheels on your 45 or did I see that somewhere else?? Thanks!