So forgive me for being dense, but what bushings are we all talking about here?
Need parts. Help
- Thread starter dannyp
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I can make up a batch. Obviously it helps if it's something that could be useful. But I could also see one of the brass bushings listed just being modified.
Without knowing what dimension could be flexible on these there aren't any of those sleeve bearings on McMaster Carr that would meet all the specs even if you did drill out the ID. Also they are fairly soft, hardest being bronze, so if steel is failing these would not last that long.
You could do a made to order drill bushing and get really close but expect to pay upwards of $40 each.
Better description of why these are being replaced would help determine need. Did they wear out, or were they lost?
You could do a made to order drill bushing and get really close but expect to pay upwards of $40 each.
Better description of why these are being replaced would help determine need. Did they wear out, or were they lost?
Toyota overstock lists the metal bushings as available. PN 3632460060. $2.21 each. There appears to be another bushing in the diagram that they don't list (36345). Are we all talking about the same thing?
Also looking at the diagram it appears a bolt goes through these and it just fills the space between the housing and the bolt? If so why could a standard steel bushing and a washer not work?
Also looking at the diagram it appears a bolt goes through these and it just fills the space between the housing and the bolt? If so why could a standard steel bushing and a washer not work?
Overstock lists then but does not and can not get them.
pengfinn
dead set
Good to know.
Still though if all it is for is filling the space why can't you just get a standard steel bushing in the right OD/ID and cut to length? Put a washer on top if need be. Looking at the diagram appears it would work without the shoulder on it.
Still though if all it is for is filling the space why can't you just get a standard steel bushing in the right OD/ID and cut to length? Put a washer on top if need be. Looking at the diagram appears it would work without the shoulder on it.
!!!!! Is that a finished product??? @NLXTACY
@dannyp
Well, most likely. I'm gonna pull my bad ones out to see what else I should do. They'll be deburred of course and I may tumble them for giggles.
@NLXTACY i doubt yours are bad, but checking Fitment is good. My bushings are missing in action.
Pm me a price please.
Pm me a price please.
I included them onto the site. I only made a handful: 80 Series Transfer Case Shifter Collar Bushing
- Thread starter
- #55
Thank you sir!! just ordered!!
Just ordered
@NLXTACY did you ever pull your bushings and put the new ones in?
HA! I seem to always keep filling orders and not have enough for myself to do this
