luxeon brake lights

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

red66toy said:
So, is it s plug and play item or would you have to put resistors in or something?



You and I will need to run an electronic flasher, as we have the pre 09/73 tail lamp assemblies that have a brake lamp and turn signal bulb that perform dual duty...opposed to the 09/73 and later trucks that use seperate turn signal bulbs from the brake lamp.


:beer:
 
120 lumens is super bright. A 4 cell maglite, with fresh batteries 'might' make 40 lumens. Ever hear of Surefire or Streamlight tactical flashlights? There used by spec-ops and police to blind assailants. There normal tactical lights produce around 65 lumens, there larger, and much more expensive flashlights produce 120 lumens, and there $400 flashlights can produce around 200 to 300 lumens. I own two different models, one as a camping piece, and one as a weapon-light, both are around 60 to 70 lumens. When I got them, I turned out the lights in my house, and had my friends shine them at me. You can't see anything in front of you, I mean nothing. Painfull. You might have a trace left of your peripheral vision. This was done from about 20 feet away. These tiny lights are far more powerful than any maglite. Normally, a one watt luxeon led in a flashlight will seem as bright as a maglite. 18 leds probably won't be half as bright as a luxeon. Luxeon is high end stuff. Probably overkill, might even blind drivers behind you unless your taillight lenses look like my old ones. Try em out, and let us know, at least NOONE will ever tailgate you again.
 
bandy rooster said:
125 lumens though? is that enough


Actually it's 140 lumens.

Thats bright. But with the size of cruiser lights probably worth it. Life span is 50,000 hr. Current draw is less than a regular bulb. And as far as I know they will not blow up under water.
 
Tactical Flashlights

I saw a 5w Luxeon tactial flashlight (meant to be mounted beneath a gun barrel) over the weekend. With just two LiIon cells like a camera battery it was comparable to a car headlight, lighting up an entire 400' tall hillside 200' away. I'm guessing 200 lumens.
 
From the looks of the light you linked up, and from what I know about the standard bulbs. I'd think it'd be pretty easy to just wire up your own leds into an old broken bulb socket. Probably cost under $3. Not that I've got time to experiment with it :D

I'll talk to some of my Electrical Engineering friends and see if they can mock something up for me.
 
wickerman said:
From the looks of the light you linked up, and from what I know about the standard bulbs. I'd think it'd be pretty easy to just wire up your own leds into an old broken bulb socket. Probably cost under $3. Not that I've got time to experiment with it :D

I'll talk to some of my Electrical Engineering friends and see if they can mock something up for me.


What kind of like this? https://forum.ih8mud.com/showthread.php?t=69262&highlight=L.E.D:flipoff2:

It can be done but by the time you buy a bulb to tear apart the l.e.ds. to wire up and the resistors (which are cheap) and your time you are way over the cost of what it cost to buy one already made sealed and plug and play not to mention the one you make will have to be sealed some way cause moisture will rust the electrical components.

So much easier and cost effective to buy. And with a life expectancy of 50,000 to 100,000 hrs it will way outlat you or your cruiser.
 
Trollhole said:

Yeah, like that. I can't imagine that at $1 per led and less per resistor that even if you spent a ton of time on it you'd approach the cost of the $20 per bulb model they're showing. As for sealing it up, if you set the led (or multiple leds) in cork or something and had them wired in series and sealed them with silicone or epoxy. it should work. You're right that for a lot of people it'd be cheaper to just buy the light, but I love messing with electronics :D
 
Back
Top Bottom