Wanted Long shot --- I know... Bed side wheel wells (flaired area) wanted

[In2cruisers]

Location

United States

I have a 66 and the PO must have bought bigger tires, so rather than buy a lift... he cut like 2" off the bed sides to make fit..See pictire.. so looking for the flaired areas both sides in usable condition

Thanks for playing......

 

[Unimogguy]

I’d check in with these guys:

Awl_TEQ Metal Parts etc.

Edit October 28, 2020 Hello all! If you are interested in any of the 40 series parts I make please contact Dan at 4WheelAuto and he will help you out. 4WheelAuto is now handling all of my parts essentially as a distributor. I make them and he ships them! Dan is trying to decide what and how...

forum.ih8mud.com

 

[kevos37]

I’d check in with these guys:

Awl_TEQ Metal Parts etc.

Edit October 28, 2020 Hello all! If you are interested in any of the 40 series parts I make please contact Dan at 4WheelAuto and he will help you out. 4WheelAuto is now handling all of my parts essentially as a distributor. I make them and he ships them! Dan is trying to decide what and how...

forum.ih8mud.com

I've attempted to contact them 2X with no response.

 

[2fpower]

What does a 66 bedside look like???

 

[DJ45]

I have a 66 and the PO must have bought bigger tires, so rather than buy a lift... he cut like 2" off the bed sides to make fit.... so looking for the flaired areas both sides in usable condition

Thanks for playing......

I am also looking for a set. Mine are still there on the truck, but it looks like some one used a can opener and pried back and forth around the edges of both sides.

 

[In2cruisers]

bonus bearing porn ??

 

[In2cruisers]

What does a 66 bedside look like???

like this......borrowed picture.......but the raised portions have been cut off of mine

 

[2fpower]

I was wondering if my 75 series bedsides that I am not going to use would work; however they are too different.

 

[2fpower]

 

[2fpower]

 

[In2cruisers]

I was wondering if my 75 series bedsides that I am not going to use would work; however they are too different.

Im very interested...at least its a start......

 

[In2cruisers]

still lOOking.....

 

[In2cruisers]

picture added

 

[jfz80]

Know you are probably wanting oem correct but the knights of bacon have been working with these utility bed sides

Granted a curved radius bend vs. flattened step profile.

74 PA PIG

Passenger rear quarter reconstruction. Some rust inhibitor. Hope this stuff works! Some BobM parts. Rust free rear quarter. Rear wheel reconstruction to follow at a later time.

forum.ih8mud.com

 

[Unimogguy]

still lOOking.....

Here you go and it appears to only be ~56 mins north from you in Temecula.

TRUCK BED FENDER RH, FOR TOYOTA LAND CRUISER FJ40/FJ45 , (STEEL)

Truck Bed Fender RH, for FJ45 Toyota Land Cruiser

tpautoparts.com

TRUCK BED FENDER LH, FOR TOYOTA LAND CRUISER FJ45 , (STEEL)

Truck Bed Fender LH, for FJ45 Toyota Land Cruiser

tpautoparts.com

Or for ~$1,361 more you could buy the whole bed

REAR TUB, FOR TOYOTA LAND CRUISER FJ45 , (STEEL)

Truck Bed, for FJ45 Toyota Land Cruiser

tpautoparts.com

If you end up buying parts or a whole bed from them please update this thread or create a new one with thoughts on fit and quality.

 

[cppilot]

I may have your wheel wells. Shoot me a pm or call. I sent you a pm.

Mark

 

[In2cruisers]

Long time no hear? Any update friend?

 

[cppilot]

Pm sent

 

[In2cruisers]

I may have your wheel wells. Shoot me a pm or call. I sent you a pm.

Mark

Hey Mark,
Been a while since Ive been in the cruiser seen ... But all (well there is no such thing ) the work on our new to us home is behind us.... Next project is the 45 back on the road......

 

[Indygbd]

Did you find these yet