Help with Part ID

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

4Cruisers

SILVER Star
Joined
Apr 2, 2015
Threads
351
Messages
7,789
This was bolted to the floor of the '71 FJ40 tub I bought earlier this year, inside the under seat tool box. Is it a support for the bottle jack?

1570588359566.webp
 
Originally this would have been black. I know this because when I bought my 68 back in 1974 all that was left was the jack holder and Jack handle clips on the wheel well. Some how they over looked the inspection light in the glove box, it was still there.
 
I'll be using that holder somewhere in my '71 FJ40 as part of my build, probably back under the drivers seat. I removed the tool box because I'll be installing '76 bucket seats on OEM hardware.
 
For those of you who use one of these brackets, do they hold the jack in place well enough? I have to acquire one for my '63.
 
I am looking for one as well.

I think a Terry Spring Clip will also work, but size is an issue. Also the right profile / height.
 
For those of you who use one of these brackets, do they hold the jack in place well enough? I have to acquire one for my '63.

I have used the one in my ‘68 consistently for 34 years now without issue.

The fact that the toolbox is filled with spare parts doesn’t hurt. ;)

And I have a box of jack brackets available for purchase...
 
And I have a box of jack brackets available for purchase...

Can I perhaps buy one of those from you, maybe along with all the parts that attach to a early (64) 4wd pull handle?

I have a plain handle, but need the chain, and rods etc for it. Lost them a while ago.
 
Can I perhaps buy one of those from you, maybe along with all the parts that attach to a early (64) 4wd pull handle?

I have a plain handle, but need the chain, and rods etc for it. Lost them a while ago.

If you’re still looking for the jack holder next week, give me a call. FWIW I don’t have the individual 4wd parts available you’re looking for.
 
I'll be using that holder somewhere in my '71 FJ40 as part of my build, probably back under the drivers seat. I removed the tool box because I'll be installing '76 bucket seats on OEM hardware.


You decided against keeping the toolbox and just notching the inside like I did? Kind of a pain getting the lid off but does provide a semi secured place to store things.
 
Turns out there were some small areas of rust through the floor under the front edge of the toolbox, so it had to come out anyways. Turns out it's pretty easy to drill out the spot welds and Dremel out the three stitch welds across the rear. It went to a good home along with the split bench seats.
 
Back
Top Bottom