front axle question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 17, 2015
Threads
7
Messages
38
Location
Faro, Yukon
Hey guys,
Wondering if someone can offer some advice. My '79 has a build-up of sludge at the inside of both front axle knuckles. Been there a while, but has recently started to be more noticeable, running down the tires. Front diff is low, going to top it up tomorrow and see how fast it goes back down. Since I am not much of a mechanic, I am wondering what kind of rebuild kit I should be getting? Is it likely that I need to replace the wheel bearings as well as a knuckle rebuild on both side? or could be a simple seal that is warn? I have to have parts shipped, and on top of the expense, it can take quite a while to receive things up here, so I would like to get everything I need at once. Also, where would be the best place to order from?

Thanks in advance for any tips and info.

Matt
 
Your inner axle seal has failed. In order to fix it you need to take everything apart. It's not hard. Just messy. Several places sell knuckle rebuild kits. Just do a search on it and you will have endless hours of reading and how to.
 
If you're not sure if the front axle has ever been serviced, you should just plan on redoing the whole thing. I do not stock a complete overhaul kit, but there are several MUD vendors that do. The '79 and newer kits have become super competitive in the marketplace, which is good for you guys, but tough on the vendors.
 
I believe Kurt at Cruiser Outfitters has kits, nice guy to deal with as well.;)
 
I believe Kurt at Cruiser Outfitters has kits, nice guy to deal with as well.;)

X2 on Cruiser Outfitters! I just finish my rebuild a month ago and their kit was great!
 
Yes to Cruiser Outfitter kits. I completed this rebuild + tie rods and ends. My hubs were garbage so I put new Warn hubs on as well. I found using a kit made it a lot easier (mainly to know everything was there).
 
Don't bother refilling it, just service it as everyone suggested. Get Marlin inner axle seals with your kit. Kurt may add those by default. He also has brand new Aisin hubs in stock that would be a nice touch.
 
I bought a rebuild kit months ago but got hung up once I started looking into the procedure, and how it requires an SST to correctly get things lined up. The SSTs don't seem to be available anywhere, and I really want to do this right the first time.

Is there any way to do the front knuckle service without the SST?

thanks
Faron
 
I bought a rebuild kit months ago but got hung up once I started looking into the procedure, and how it requires an SST to correctly get things lined up. The SSTs don't seem to be available anywhere, and I really want to do this right the first time.

Is there any way to do the front knuckle service without the SST?

thanks
Faron

If you aren't installing different knuckles, you don't need the SST knuckle setup tools. Just keep track of the shims top and bottom, and don't mix them up.
 
As KingAir said, hear good things about Torfab as well
 
x 2 on the Terrain Tamer. Also, this is the greatest tutorial: and part II:
 
Your inner axle seal has failed. In order to fix it you need to take everything apart. It's not hard. Just messy. Several places sell knuckle rebuild kits. Just do a search on it and you will have endless hours of reading and how to.
That is where my thoughts were leading to. Thanks for the input. Now to save my nickles. Between our dollar trading for near pocket lint and the fact I live in the middle of nowhere, I anticipate this being a bit pricey. Should I bite the bullet and order new bearing as well, or do they usually last?
 
Thanks for the advice. 4wheelauto is my usual default. I've had good experiences with them, and they are my best shipping option being in the Yukon. I'll tour the other sites mentioned as well. I am not afraid of tackling it as on my own, as I have a few mechanic friends around who can help me fix my screw-ups, AND they work for beer. But what kind of nightmare am I looking at for, presumably, never serviced knuckles?
 
Back
Top Bottom