For Sale / Wanted To Buy

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

WANTED: set of tundra rims. if you guys see any give me a buzz.
Looking for a nice XC full suspension mtn bike. Specialized FSR or Fisher Sugar or the like.


FOR SALE: IPOR skid for 40 series $250 new
RC tube buggy-- ready to run with all you need to get started $250
2F parts: fan, fan with clutch, dizzy x2, starter, alternator, etc
 
FJ Cruiser Demello front hoop bumper and Bent Up sliders

FJ Cruiser Demello front bumper with center hoop
Poweder coated black.
Good condition - some powder has come off passenger side recovery point.
Comes with bottle opener on driver side of bumper.

Retails for $925 plus shipping from Colorado so I'd estimate $1050 to SC. See manufacturer link HERE.

Asking $700 out the door for local pickup or MUDSHIP. Located in upstate SC (Travelers Rest and Seneca).

image.raw


image.raw


image.raw


xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Bent Up sliders which appear to now be out of business (website doesn't work).
These have seen some good use but are still ready to take more of a beating.
Originally powder coated black. I've repainted them once.
They could use another repaint.

From what I can find they retailed for around $450 ($325 bare + $125 for powder) + shipping additional to to SC I'd estimate $500.

Asking $175 firm out the door for local pickup or MUDSHIP. Located in upstate SC (Travelers Rest and Seneca).

Please see pictures above. I can take better pics if needed.

HERE is a link to the blue forum discussing these sliders.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Also have a set of used FJ Cruiser rear lift springs - mediums. I thought these were OME's but appear to be a custom spring??? They worked great for me until I put too much junk in my trunk (tools, CO2, rack, awning, RTT...) and I upgraded to heavy OME's.

$50 local pickup or MUDSHIP. Located in upstate SC (Travelers Rest and Seneca).

Springs for sale are on the left. New heavies installed are on the right.
image.raw
 
i have a newer full sized freezer on top fridge i'm selling. Works well, a spare i keep in the garage. Moving to a new house where the garage will be used as a garage so it's not coming.

50 bucks!!! sorry no pics and i don't know make But 50 bucks for a good 5 yr oldish fridge with ice maker.
 
BMThiker said:
what's the screen resolution on this one?
Click to expand...

from the box

intel n 450 1.66 ghz 512k l2 cashe, 66 mhz fsb
genuine win 7 starter 32 bit
1 gb ddrw system memory
160 gb 5400 rpm hard drive
10.1 " diagonal wsvga anti glare led display 1024 x 600
intel graphics media accelerator 3150 with up to 256mb total available graphics memory
802.11b/g/n wireless lan
min web cam with dig microphone
3 usb 2.0 ports
2 in 1 integrated digital media reader
6 cell li-ion battery
 
testing waters...looking to maybe do some trading.

I have a ranger OD and a 1987 H42 tranny.

If i can do some trading/selling i might be looking to switch my drive train over to an automatic.

If you got some spare cash laying around or a 4l80 or 4l60 we can maybe do some trading!

The ranger OD is not friendly when towing a heavy boat.
 
I still have a 6" lift springs for an FJ80 available.

I would trade them for a good set of low back seats. I need a set for my M38a1 project.
 
ff347 said:
Pro-Tech 10" table saw with stand, good for the most basic wood cutting needs-$25.00
Stihl trimmer fs45 runs well and does a good job for the homeowner-$40.00
Click to expand...

PM and possibly email sent regarding the table saw.
 
Got a friend looking for a small place (efficiency, 1bdr apt, etc.) to rent in or near Columbia. Anyone know of something? Probably at least a 6 month least would work.
 
Yellow FJ40 On Hwy 101

I don't if anyone else has posted this. Yellow FJ40 for sale on Hwy 101 south of Reidville Road. At 60mph it looked very complete and very good. Didn't stop to take a look but will this week.
 
Cross Post:

https://forum.ih8mud.com/vehicles-t...0-2007-650i-bmw-coupe-45k-miles-40-000-a.html

Sorry the car is dirty :)

Decided the 6 series needs to go to make room for a 5 series and a toy MG.

Black with Burgundy leather interior.
Nav, XM, Bluetooth, Parking Assist, onboard diagnostics, etc.
Has a dealer installed invisible bra thing that takes the hit from bugs and stones, etc on the front clip.
5.5L V8 with a 6 speed auto with manual option (slap shift)
Sport mode lowers suspension, increases RPMs per gear (makes it insane)

This thing is amazing to drive, hot looking, and will stick to the road better than most anything out there.

Comes with balance of 100k CPO warranty (July of 2013) from BMW and maintenance can be purchased before 50k which will allow you to have all inclusive oil and other maintenance not covered by factory warranty for free until 100k.

In Atlanta...come get it!

BMW016.jpg

BMW015.jpg

BMW014.jpg

BMW013.jpg

BMW012.jpg

BMW011.jpg
 
Anybody looking for a work truck? Got two going up for sale.

My brother is selling a 1991 GMC 1500 V8. Single cab,auto tranny,power windows, power locks,new cd player,tool box,bedliner,running boards. It has a few scratces and scrapes but far less than you would expect for a 91. 31 x 10.5 BFG AT's. Two tone blue over white. I have been driving this truck back and forth to work for the last couple of months and it runs strong. $2500 firm.

I'm also looking at selling my 1991 F150. 5 speed,V8 302, A/C, extended cab with a full size 8 foot bed. For those of you who were at GSMTR last year It's the truck I was driving there. The paint isnt great but it is a relly good work truck. Also has a decent size tear in the seat which could easily be fixed or covered with an inexpensive seat cover.The only reason I'm considering selling is because I dont want to put 2 child seats in the front of it. The rear seats are jump seats that fold up like the 40. The clutch,front brakes,cap and rotor, plug wires and master cylinder have all been replaced within the last year. (normal wear and tear) Looking to get $2000

I'll take some pic's if anybody is interested.
 
guess Ill try selling land cruiser related items here...then maybe the rest of my very valuable, very desirable items...


OKAY here goes, some days are better than others... seems I have WAY too much junk.... any item listed below maybe withdrawn at any time. Prices are asking, details/pictures sent upon request, send me an email address. And please, only ask for information if you are serious... Some things are easier to get to than others, soooo be patient,,

78 Fj40 $5000-rebuilt motor, 4" lift, 8274, shack reversal.
72 Fj55 $2950 project, with new motor, parts for ps, and 2fe ok, with the 81 Fj60
87 Fj60 $4500, too much to list, great motor, new frame, TONS of newness
88 Fj62 $4000 dd, 328k on the odo, but 150 psi, ome, new FI, locker, rebuilt f axle, new brakes... lots new
76 Fj40 Chassis $1400, rebuilt axles, saginaw, bumpers/ettes too,

Mound of land cruiser parts, doors, transmissions, transfer cases.... $1500
 
Last edited:
aw hell, how bout I just list it all.....I may sell something locally, or decide I don't want to sell it after a few other things are gone... so don't get upset if I change my mind...


Kubota M5700 Tractor, diesel, 2003 550 hours, 4wd, FEL, attachments $23,000
bushhog 6' rhino brand
box blade
3 pt: lift, hay spear, lift , I may have an auger, 6x16' drag harrow
quick detach fel, with quick detach attachments: 6' bucket, removable tooth bar, fork lift, hay spear,

smaller mammoth donkey gelding, $500 very gentle
double registered paint arab mare, great trail horse, very gentle, all tack $1500
craftsman band saw $100
craftsman table saw $100
fmb miter head band saw $3300
floor model sander belt and disc $600
miller 250x welder $1400
miller stick welder ac/dc $450
miller spoolmate 200 spool gun and welder $800
pak master 75xl $2000
167# head, 250 bpm power hammer $3000 (weighs 4k)
misc blacksmithing tools and anvils, tongs, blowers, propane and coal forges, stands etc $3000
50 ton 3 phase hydraulic press $1000
3 oil hydraulic motors 110v $100 each
24" dayton fans 50 each 120-240v
hobart electric convection oven half sheet pan $400
non working drop in 2 hotel pan cooling table $75
4' sliding door cooler $800 like new
barbour jacket, new $300
Yo Eddy Fat Chance Mountain bike $2000 xl
4 wheel 6'x14' mobile home axle trailer with spare $600

case uniloader $9000
15T slide top trailer $3000
Antique wood/coal stove porcelain coated $300
International Truck, similar to a school bus, but with a flat bed and ramps to drive up on to..$3000
 
You must log in or register to reply here.

Share this page

Back
Top Bottom