Well, that wasn't nice. I'm inclined to blast up to AmToy in the morning and tell daughter-dear you said that. Oh, wait, I think you already have. Never mind.
Plus, I know you are right.
For Sale @ High Desert Cruisers
- Thread starter Ruadhrigh
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Plus, I know you are right.
Also, I have 2 instances of evidence that it lasts well into adulthood and beyond the teen years.Well, that wasn't nice. I'm inclined to blast up to AmToy in the morning and tell daughter-dear you said that. Oh, wait, I think you already have. Never mind.
Plus, I know you are right.
These will get tossed this weekend unless someone wants a project. Don’t need anything for them, just get them out of my garage so I stop tripping over them.
If it helps these stay out of the trash, I have non x-axis bushings for SPC arms sitting in my garage for someone to rebuild these with
Hey! There we go. Now all that’s needed is ball joints and the will to wrestle the old bushings out. Forgot to toss them in the bin last night when I put it on the curb. Someone grab these!!
Gonna be selling my 2001 land crusier 260k miles fresh tires and fully rebuilt trans, and my 2002 Toyota 4runner 210k miles
PM for more info .
PM for more info .
Here’s a few photos I’ll hook it up for a mud member
Selling my Leer 100xr painted slate metallic (1F9). It fits 2007-2013 Tundra Crewmax. I ordered a RSi style topper from Alibaba and it should be here in December. If I didn’t want the extra strength and windoors for my work truck topper, I’d keep this. It really does fit great. Leer makes a quality topper.
This topper is missing the front window, but I got a quote and part number from Leer: part #5456152012, is $280 +tax = $303.10.
It has new shocks and two new keys. Carpeted on the inside and comes with the bed rail attachment system. No damage to the paint or fiberglass. Has T-tracks already installed and they work great. Also comes with an electronic lock adapter for the lock/latch.
$600 obo ($3000 or so for a new 100xr)
This topper is missing the front window, but I got a quote and part number from Leer: part #5456152012, is $280 +tax = $303.10.
It has new shocks and two new keys. Carpeted on the inside and comes with the bed rail attachment system. No damage to the paint or fiberglass. Has T-tracks already installed and they work great. Also comes with an electronic lock adapter for the lock/latch.
$600 obo ($3000 or so for a new 100xr)
Sold
Tires are gone, no longer available.
Free, I have some old BFG MTs that I am getting rid of. If anyone wants them they are free. I will be headed into town this week to have the rims removed. If they are not spoken for by then I will leave them at the tire shop for disposal. Tire size is 285/75R16.
Free, I have some old BFG MTs that I am getting rid of. If anyone wants them they are free. I will be headed into town this week to have the rims removed. If they are not spoken for by then I will leave them at the tire shop for disposal. Tire size is 285/75R16.
Last edited:
I might have to call dibs on these !
Folks, I have decided to sell my brand new Planar Diesel Heater that I intended to use for my RRT. I have used this three time so it is in LIKE NEW condition. All in, I spent about $1,750 (shipping/tax etc). I am willing to part with it and the 10' hose for $1K. LMK if anybody is interested. The one I have is the yellow version.
Specs can be found here:
Specs can be found here:
My Pinball Fixin' Wizard, Jacob Shattuck, is selling his 2wd 98' 4Runner and also has a Toyota truck engine- $$ as he states make an offer $$. (no photos yet but I am sure if you email him- gavilanglass@gmail.com) Miss yall- hope to catch up soon! J!
Sorry I don't have any recent photos, but I've compiled a list of all the bad and good I know about the car. If you want to pass this info along, I'd appreciate it. I'd be open to whatever offers, especially if it goes to someone who wants to keep it going. I know this lost isn't selling it, but want to keep it as honest as possible.
I also have a 1981 (maybe 82) toyota manual transmission longbed pickup with a 22r engine, it does have rust though and is a 2 hour trip away.
1998, 4 runner, 4cyl, manual, 2wd, red
Have title
~250k - 280k estimated miles, odo reads ~235k (will be sold as not actual miles on title)
Blown head gasket, no apparent knocking according to mechanic
Clutch replaced ~6 years ago
New plugs and wiring
Speedometer works for a few minutes then quits
Right side of instrument panel lighting out
Passed emissions in sept. 2025
backlighting for climate control out
Hacked harness between instrument panel and computer
Missing a mounting point for driver side seat
1 (of 5) tires needs new valve stem
Driver seat worn/torn (has sheepskin cover)
Aftermarket speakers and bluetooth stereo
Broken door lock button bracket on passenger side
rubber floor mats from a prius (not installed on driver foot well)
Driver footwell floormat very worn
Some damage to the front bumper from previous owner, turn signal cover reinforced and sealed
Undetermined suspension work needed, bouncy and leans left
Clearcoat sun damage on hood and roof
factory roof rack
Factory tow 2" receiver hitch
Headlights need adjustment
Battery shows signs of leaking, some corrosion on connectors
Antenna motor whirs, but won't move the antenna
Desert only vehicle CA / NM
No(?) Rust
Maybe best to send interested parties to my personal email, gavilanglass@gmail.com
Sorry I don't have any recent photos, but I've compiled a list of all the bad and good I know about the car. If you want to pass this info along, I'd appreciate it. I'd be open to whatever offers, especially if it goes to someone who wants to keep it going. I know this lost isn't selling it, but want to keep it as honest as possible.
I also have a 1981 (maybe 82) toyota manual transmission longbed pickup with a 22r engine, it does have rust though and is a 2 hour trip away.
1998, 4 runner, 4cyl, manual, 2wd, red
Have title
~250k - 280k estimated miles, odo reads ~235k (will be sold as not actual miles on title)
Blown head gasket, no apparent knocking according to mechanic
Clutch replaced ~6 years ago
New plugs and wiring
Speedometer works for a few minutes then quits
Right side of instrument panel lighting out
Passed emissions in sept. 2025
backlighting for climate control out
Hacked harness between instrument panel and computer
Missing a mounting point for driver side seat
1 (of 5) tires needs new valve stem
Driver seat worn/torn (has sheepskin cover)
Aftermarket speakers and bluetooth stereo
Broken door lock button bracket on passenger side
rubber floor mats from a prius (not installed on driver foot well)
Driver footwell floormat very worn
Some damage to the front bumper from previous owner, turn signal cover reinforced and sealed
Undetermined suspension work needed, bouncy and leans left
Clearcoat sun damage on hood and roof
factory roof rack
Factory tow 2" receiver hitch
Headlights need adjustment
Battery shows signs of leaking, some corrosion on connectors
Antenna motor whirs, but won't move the antenna
Desert only vehicle CA / NM
No(?) Rust
Maybe best to send interested parties to my personal email, gavilanglass@gmail.com
nab856
SILVER Star
Which Toyota truck engine?
1981 Pickup details?
Last edited:
As per the post- if you would please email him with questions- his name is Jacob - gavilanglass@gmail.com
Also per the post- a 22r engine
Good luck!
SOLD
I’m selling a JD squared manual Tube Bender. I never used it. It comes with a swag mounting plate to build a pedestal or cart to mount it on. It is just the bender no dies included. Asking $300 for it.
I’m selling a JD squared manual Tube Bender. I never used it. It comes with a swag mounting plate to build a pedestal or cart to mount it on. It is just the bender no dies included. Asking $300 for it.
Last edited:
I am also selling a set of new ( never installed) Slee Off-road high steer arms for 80 series knuckles. I am including a new non-US left side oem lower steering arm as suggested by Slee to run these in double sheer. Asking $500 and firm. I will add some pictures soon.
Sold.
5VZ FE ran when pulled 250k - 800$ or for HDC member 500$
