Cruiser Patch 100 Series Products Thread (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Lavender Jones said:
Good day, is there anyway you have any of the early model LX470 OEM roof rack rubber cushions? I was able to find them for the 2003-2007 models, but i have not been able to even locate a part # for the earlier models such as my 2001 LX470. Apparently they are smaller on the earlier models so the ones from 2003+ are not compatible. Any assistance would be greatly appreciated!
Click to expand...

Roof panel & back panel for Toyota Land Cruiser UZJ100W - Genuine parts

Roof panel & back panel for Toyota Land Cruiser with UZJ100W
toyota.epc-data.com toyota.epc-data.com

(01.98-08.02 CYG)

63484-60040 (center RH)
63485-60050 (center LH)
63487-60030 (FR LH)
63486-60050 (FR RH)
63488-60040 (RR RH)
63489-60030 (RR LH)

Here's what you're looking for. I do not stock these but can get them if you want me to pre-order some for you. If so, send me a PM or email for more details
 
cruiserpatch said:

Roof panel & back panel for Toyota Land Cruiser UZJ100W - Genuine parts

Roof panel & back panel for Toyota Land Cruiser with UZJ100W
toyota.epc-data.com toyota.epc-data.com

(01.98-08.02 CYG)

63484-60040 (center RH)
63485-60050 (center LH)
63487-60030 (FR LH)
63486-60050 (FR RH)
63488-60040 (RR RH)
63489-60030 (RR LH)

Here's what you're looking for. I do not stock these but can get them if you want me to pre-order some for you. If so, send me a PM or email for more details
Click to expand...
Thank you! I sent you a PM
 
Effortless 1 finger shift into 4L with this guy

27F76717-6158-4FD6-8D15-A6D6DF31AEFD.png


Highly recommend, Thanks Patch
(now get those rear wipers in stock already)
 
bozncsurf said:
Effortless 1 finger shift into 4L with this guy

View attachment 3629410

Highly recommend, Thanks Patch
(now get those rear wipers in stock already)
Click to expand...
Awesome, thanks!

They’re currently in Memphis Tennessee (the Prius wiper kits). $10 says they will sell out immediately. I’ve already order 20x more
 
Thanks for everyone's patience while we're experiencing some delays in stocking many of our kits.

Just received word that the next shipment has cleared customs and will arrive Wednesday. Expect our inventory to be updated on CruiserPatch.com by Thursday, May 16th

Patch
 
Restocked:

Evap leak kits

Torsion bar hardware kits

Prius wiper arm kits

Maroon trim clips (10 pack)

Fender liner clips (10 pack)

Door card clips (Ivory & Stone)

Positive N+ terminal kits

Flange gasket kits

Brake booster gaskets (4 in stock)

I've also got some new 100 Series kits that just arrived as well as some Toyota Special Service tools that should be fun for the DIYers out there.

Working on a plug & play harness for the LX470 turn signal retrofit kit
 
Some new kits and tools:

NOVA8983-WPTUBSIL.png
NOVA8985-PTR27-60110.png

SuperPro Bushing grease
TRD rock warrior install kit (currently out of stock - ETA 2-3 days)
NOVA8991-SST-00510.png
NOVA8989-SST-00500.png

SST-00510 de-pinning tool (male)
SST-00500 de-pinning tool (female)
NOVA8988-SST-01030.png

SST-01030 de-pinning tool

Not sure how much demand there are for any of these but I definitely wanted them so I bought two of each. Currently one of each in stock. More en route if demand persists.
 
Last edited:
bozncsurf said:
Define immediately... because it looks like I’m gonna be short $10

I thought you meant 10 doll hairs
Click to expand...
Sold out until the next batch arrives. Thanks everyone!

Next batch ETA early/mid June
 
MechE30 said:
Super cool design for the bushing press. A next step up on that could be an arrow and “front” text to it. Might be worth the second op cost. I believe that bushing has a preferred direction.
Click to expand...
So the press tool is actually reversible/ symmetrical (can fit in at 0 or 180°). It could say "front" or have a mark of some kind to designate orientation, but it would be up to the user to orient the bushing/ tool correctly relative to each other prior to installing.


Thinking on it some more- if there is a mark on the bushing to designate front, then yeah, it would be a good idea to put a mark on the press tool to line it up. Then you'd just have to remember to point both pieces forward.
 
MongooseGA said:
Something simple like this may be helpful. If anyone has a top-down view of that bushings showing any kind of nub or mark designating orientation, that can give me a better idea of what it would need.

View attachment 3634018
Click to expand...
That’s a good call to keep price down. May be a little harder to recognize the matching up of the nub but maybe include a simple install guide on like a business card size paper in a bag.
 
Last edited:
Man I keep missing out on the wiper arm, and now the bushing press tool! :banghead:
 
Jack90210 said:
Man I keep missing out on the wiper arm, and now the bushing press tool! :banghead:
Click to expand...
I’ve got more wiper kits en route 👍🏼 they’re hard to keep on the shelf 😂

As for the bushing press tools, those may be a while before I have an ETA. Had issues with manufacturing them for a reasonable cost…to be continued…
 
You must log in or register to reply here.

Similar threads

Kabanstva
LX470 vs 100-Series Land Cruiser Frames Same or Different?
Replies
9
Views
1K
hoser
hoser
1
1998 Toyota Land Cruiser 100 series Alignment
Replies
2
Views
572
1998landcruiser
1
Katascopos
BMAC 100-series 'build' thread
Replies
2
Views
922
MongooseGA
MongooseGA
dhuffste
100 series ticking noise
Replies
6
Views
510
2000UZJ
2000UZJ

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom