carb?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 19, 2005
Threads
8
Messages
27
Location
Cincinnati
Website
www.pipsquack4wheelers.com
just wanted to find out from everyone what they think the best carb.,
is on a stock 6, weber or stock re-build..... and a re-build from who????
Not a carb for street a carb for inclines and pucker spots.....
 
Assuming this is for a 2f with a 2 bar Asian, Keeping the stock two barrel is best. Jim C (do a search) has the best reputation by far, but there are a few others out there.
 
Stock is the way to go and Jim C is the man. I believe Mark from Marks offroad is also supposed to be good at rebuilding. My roommate was told 74 75 was the best yrs I believe. But if its rebuild right then it should do good. Check out the one I have in the for sale section if you dont have one.
 
Stay stock. Ive got a rochester and hate it...
 
A carb from a 73-74 would be your best bet. Simple compared to later carbs and performance equal to a webber/holley if tuned right. The only drawback is no ported vacuum for vacuum advance. I installed this port myself on my 74, haven't tested it yet but I'll post when I do.

JimC or Mark are carb gurus, if you have the money they are the best option for carb work.
 
Rebuild the stock. I never had a problem with the stocker till it finally crapped out. Instead of being smart and rebuilding it I got a weber. It was great on the road but really sucked off road. The motor blew shortly after that and now I have a 350 w/ a qjet that I can't complain about :D
 
peterson said:
Not a carb for street a carb for inclines and pucker spots.....

Aisan has the BEST idle and off-idle characteristics. The seat-of-the-pants horsepower difference of the Holley, ROchester and Motocraft comes from the fact that they only have one throttle shaft and open both bores simultaneously. About the same level of sensitivity as pushing the lever on your toilet! :flipoff2:
 
I vote stock with a Jim C rebuild. I also had the Jim C distributor magic. Well worth the $$$. Just do it. (Bonus: no linkage problems with original equipment!)
 
Stock. I rebuilt mine myself, $25 for the kit and it took 1 night and about a 6 pack of beer. Ok I lied, it was a 12 pack. And don't do it on the kitchen table, especially if your roomate is planning on bringing a date home that night... :doh:

Many members here have spoken very highly of Jim Chenoweths (sp?) rebuilds.
 
I put a Weber on my 77 and it has done fine for the most part, and actually run very well offroad on some very steep offcamber stuff............. That being said I am in the process of going back with the stock asian carb. mostly due the the throttle cable set-up that replaces the stock pedal and linkages. I have had two throttle cables break on me and the Weber always seems to run rich, so having seen the overwhelming responses of fellow mudders about rebuilt Asians they seem to be the way to go.

As a side note do you guys have any idea what a used (less than 1,000mi) Weber carb. and pedal should bring I know a year ago it ran me about 550, I just want to know how much to ask for it when I seel it here soon..........
 
Wow didn't know I had such a desirable carb...

I absolutely love my Jim C rebuild. He installed a vac advance port for me, I installed a late model vac adv dizzy and the power increase, particularly bottom and top end was incredible. Can now reliably hit 75-80 no problem, cruises 70 all day.
I know I would fee the same about a Mark rebuild. Mark also knows his shiznit.
 
Back
Top Bottom