Bosch plugs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

brownbear

Mod in Hibernation
Moderator
Joined
Sep 6, 2004
Threads
121
Messages
7,187
Location
Hamilton, Ontario
I bought some Bosch 4 tip iridium spark plugs for my 3fe 80. The part number was listed at the Local parts place(Canadian Tire).

They were like 17 bucks for 2.

Then one of my friends mentioned he thought that the bosch plugs might not work soo well in a Toyota engine.

Any thoughts on this? I might give them a try and see. Piston aircraft spark plug lots of times have multiple contacts, so I thought they would be pretty decent.

Thanks, BB
 
I replaced mine a few months ago. I got some iridium NGK's. I ran the platinum 4's in my 350 Chev, but was told by many on this forum that either the factory Denso plugs or the NGK ones would perform much better. So far, I believe them. Same thing with plug wires, go factory
or go home. This is very odd for me to say, being used to GM and...shhhh! Jeep:frown: vehicles, where the after-market parts way outperform stock. I think C-Dan is right when he says that these are high-end luxury vehicles, and so their parts have been made to that level. (Tirade is now over. Bloody Americans!)
 
I was a lifelong bosch user, I'm not anymore. My LC is sporting Denso plugs now. Bosch quality does not seem to be what it used to, and they are more focused on marketing. The final hint to me was when BMW moved to NGK for their OEM plugs.
 
Most folks here (me included) will tell you to just go with the OEM (Denso) plugs. And, they're pre-gapped! (For some unwarranted reason, that just really seals it for me...:lol:)

Curtis
 
Bosch plugs that were mislabled for the heat range caused a big carbon buildup in my '82 Nissan Maxima, and the dealer told me never to use anything but NGK. I haven't used Bosch since. If it's Japanese, run NGK or Nippondenso.
 
OEM Toyota MR2 Turbo plugs in my turbo'd 97 and OEM prior to that with no issues.
 
Just get the Denso from your local dealer. $2.22 from the dealer in your area, or send a PM to CDan and get them for $1.66 ;)

The manual calls for either the (Nippon)Denso or the NGK. It's fairly simple, and so inexpensive that I don't know why people insist on using/trying different plugs and for more than $6/plug at that ;)
 
I did the platinum super duper specialty ultra high performance quad tipped shebang plugs years ago. Motor started running real rough after a few months. All plugs had what appeared to be burned electrodes. NGK all the way. Keep all igniton parts OEM.
 
I must agree, take them back where you got them and get the NGK's. I tried some after market plugs at one point and went back OEM with in a week. Can't say why it matters so much... BUT IT DOES.

KK
 
Thanks for all the responses.

I will return them.

What I hope was they would run better than standard ole plugs. But oh well. Sounds like OEM is a lot cheaper anyhow.

The price didn't matter though. I just wanted decent plugs that maybe were hotter.
 
Thanks for all the responses.

I will return them.

What I hope was they would run better than standard ole plugs. But oh well. Sounds like OEM is a lot cheaper anyhow.

The price didn't matter though. I just wanted decent plugs that maybe were hotter.


When new all properly operating plugs should work as well. What separates them is how they age. Copper tips gap expands 2-3 times as fast as a platinum plug. Platinum plugs run better longer.
 
Gonzo..... money back in my pocket.


I will most likely just get some Toyota plugs.
 
Very strange issue. I am an old Jap tech who used to be all European. The original NGK was made on a Bosch patent, but Bosch do not seem to be happy in some Jap engines. The NGK copper plug is literally copied from Bosch on a patent agreement. Yet Hondas and Toyos do not seem to like Bosch.
I serviced Hondas for 20 years in factory trained shops. We could put Bosch in ten cars and they would run fine in eight of them. The other two would misfire for no reason. Honda engineers spent a lot of effort trying to find out why. They found no answers. They ended up recommending that Jap plugs be run in Jap cars, and German plugs in European cars. There is no logical reason except that your plugs should be from the same country that built the engine.
I use NGK Iridium in my truck with great results.
 
They ended up recommending that Jap plugs be run in Jap cars, and German plugs in European cars. There is no logical reason except that your plugs should be from the same country that built the engine.

I used to believe the same thing, then BMW jumped to NGK as a factory plug.
 
Back
Top Bottom