Adjusting steering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 20, 2005
Threads
32
Messages
220
Location
Stockholm, Sweden
Hi
I really need to adjust my steering as you can see in the pics attached , turning to the right is very increased.Ive tried to search the forum but didnt find how to do. I also have a large freeplay in the steering wheel. There is a servo installed by previous owner that doesnt look stock , can you tell by the pics if it is only the servo or is it the steering gear too? sorry for the bad quality on the pics but my cam is with my daughter at the moment so i had to use the videocam
 
Last edited:
Holy crap man. Your pitman arm is on upside down!:eek: It looks like it hits your front fender, that might explain your limited wheel movement to one side. Also, that steering box mount doesnt look stock. You might want to think about trying to locate a original mount and box.
 
Someone screwed up your steering real bad - scary stupid. Steering igeometry is all wrong, steering box mount looks half-assed. Your drag link (steering rod behind your tire) should be level!

No adjustment can fix this. The rig as it sits looks to be completely unsafe to drive at any significant speed. Get it to a competent LC shop right away.
 
crushr said:
No adjustment can fix this. The rig as it sits looks to be completely unsafe to drive at any significant speed. Get it to a competent LC shop right away.
OR...do the following:
1. Get the following parts: Stock Mount, Box, new TREs (for the Drag Link)
2. Read the service manual and install them correctly!!!

Untill the above is complete PARK THAT THING!!! :eek: I wouldn't even THINK about driving that myself!!!
 
Thats not a stock box. Is it power? With that angle on the drag link I'm surprised it works at all, let alone the stress on the center arm. That box must turn the wrong way and that's the only way the PO could get it to work. If it's not power get an OEM box and mount. If it is power still get an OEM box and mount.



Kevin
 
WOW i like the black...mroe pics more pics!
 
i did a double take

i have never seen anything like that before in my life'


thats FUBAR
 
I smell a Darwin award coming.........:eek:

You REALLY

ABSOLUTELY

have to PARK THAT THING until you get that fixed. You are in serious danger, and are a danger to everyone else on the road with that total POS.

In a nutshell, the rod that is coming down DIAGONALLY from your steering box to your center arm HAS to be in a horizontal plane, level with the center arm.
The pressure created by having the drag link at that angle not only increases the likelihood that your center arm will bend spontaneously and DRAMATICALLY, but it also increases the likelihood that the center arm pivot will BREAK.

If you would like to see a pic of what the center arm looks like when it shatters, I have one outside my shop right now. Whole bloody thing sheared right out of the frame!:eek:

After you re-orient the drag link into it's proper location, I would still check that center arm assembly THOROUGHLY, take pics, ask more questions, and, if ANY doubt remains, REPLACE IT.

DO NOT SCREW AROUND WITH STEERING ISSUES! THIS IS BASIC SAFETY!

Thank you.

Mark A.
 
Thanx for all your support, i will take you by the words and mount down the gerbox and draglink. Po have installed power steering that i will replace also.It feels very good to be at this forum with all your knowlege and support. I have only taken the car for some test drives and i must confirm that the steering feels screwed up. Ive heard by the PO that the car was driven from Italy to Sweden in this condition. A trip approx 2000 km.:eek:
I can take some more photos of the installation if anyone is interested.
 
Yep. Just like everyone else has said, the PO did you wrong dude. That steering box doesn't belong there. The mount is scary and so is the geometery. From the looks of it, there is really no way that your rig can be made to work right or even safely with that setup.

Return it to the stock configuration or do an appropriate PS conversion.


Mark...
 
To use the search function go to the top of the page. It is just right of center and down a bit. Use the advance search to limit your search to this tech fourm. Dont get frustrated you will have a sweet rig when it is fixed. good luck
 
projektdotnet said:
I really hope you have this rig parked for the time being!
It wont leave the parking before it gets a new steering gear etc. I called my locl Toyota dealer today and he will call me back hopefully tomorrow with a pricequote. I will need to replace everything from the steering wheel to the front bumper i guess.
 
Dealer!! That sounds like a stack a cash. Why not get used stuff off the Mud folks? Just a thought. Nice looking rig.
 
cosmo said:
Dealer!! That sounds like a stack a cash. Why not get used stuff off the Mud folks? Just a thought. Nice looking rig.
No one would be happier than me if i could but i live in Sweden and the 40 model were never sold here so there are only a few imported around and finding used parts here looks impossible.
 
Back
Top Bottom