For Sale 73, 77, 78 SERIES diesel parts, engines in Van, BC Canada (1 Viewer)

BiffS

Too many projects... ooh, look. Something shiny.
Joined
Oct 2, 2005
Messages
527
Location
Vancouver, B.C>
Hubs were sold with the front axle. I have some parts versions. What pieces do you need?
the one i have is 85980-60080 (Door module)

I'll check what E- hubs that i have. You want the harness from the axle to the chassis? that's part of the main harness. if you want the on axle one, i don't have that.
 

BiffS

Too many projects... ooh, look. Something shiny.
Joined
Oct 2, 2005
Messages
527
Location
Vancouver, B.C>
Would you happen to have a list of what you have left?


The list is long...

Good, complete 1HZ
Good complete (installed, 1PZ-Turboed)
Lots of doors
12 and 24v electrical
Glass
Interior
Front tube bumper
Semi-float rear end with 410 and LSD
AC SYSTEMS (2 SETS)
3 turbochargers and intercooler kits (all brand new)
Turbo conversion kit for the 1HZ
Some misc 1HD-T engine parts
Small bits and bobs
Fenders/hoods/ fender inners
Door cards
24-12v converters; 15 amp and 60 amp
LHD H-4 headlights

Frames/ body tubs gone.
 

SNLC

OCD
Supporting Vendor
Joined
Sep 9, 2004
Messages
7,088
Location
Boise - Idaho
Door cards tan? LX model by chance? Pics please, pm is fine or email me ian at snlandcruisers dot com

I am looking for other things as well but let's start with the door cards.

Cheers
 

BiffS

Too many projects... ooh, look. Something shiny.
Joined
Oct 2, 2005
Messages
527
Location
Vancouver, B.C>
All the trucks were the grey/ blue combos.

73 was a ZX
Prado a VX

Door cards tan? LX model by chance? Pics please, pm is fine or email me ian at snlandcruisers dot com

I am looking for other things as well but let's start with the door cards.

Cheers
 

BiffS

Too many projects... ooh, look. Something shiny.
Joined
Oct 2, 2005
Messages
527
Location
Vancouver, B.C>
Fixed.

I would consider the suspension bases if you have them. I know they don't bolt in non-suspension seat trucks.

Cheers

Sorry for the delay, was out of country. I have suspension bases. Were in the HZ73 ZX trim. They will bolt to some factory floors as the drill points are marked on the bare metal floor, just need to add some stiffeners or large plate washers and a nut below. The body tub i have now for my 77 series was non suspension and that was the conversion.
 
Joined
Sep 9, 2009
Messages
262
@BiffS Do you still have the suspension bases for the seats? I might be interested if @RMP&O doesn't want them. Thanks
 
Last edited:

Users who are viewing this thread

Top Bottom