Does someone have a dxf or other CAD file for the exhaust flange on a 1PZ?
I'm planning to weld up a new turbo manifold similar to what I've done on my 3B and would ideally start with getting a flange cut on the waterjet.
Hey how’s it going
I’ve bought a 1hdt to replace the 1pz in my 77 series and am considering my gearbox options.
Will an h151f from an 80 fit in the transmission tunnel fine? I’m assuming I will have to do some fabrication regarding the crossmembers and lengths of drive shafts?
Or has anyone used...
Hi,
Second attempt at understanding what is going on here.
I'd like to hear toughts as to how it is possible for the timing marks on the crankshaft and the injection pump pulleys to not match up at TDC yet the engine still run?
Crankshaft pulley offset?
Injection pump pulley offset?
Timing...
Hi,
In the process of changing the timing belt, water pump + belt as well as A/C belt, thermostat and camshaft oil seal on 1PZ and just noticed what looks like very fine cracks or casting marks on both sides of the oil seal retainer. Also there appears to be a slight lump on the back side at...
Got this on a partial parts exchange from a buddy who had swapped it out of his 1pz for one with an HAC on top of it. It was working at the time but I don't have any info about the kms etc. My original plan was to use it as a core to try to get a 1hz pump out of AUS (without having to pull mine...
Hello all: friendly, 70 series mod fwker here doing a build.
my love of the 70 series only seems to grow mainly because it’s the only LC that I still learn things about with every iteration I engage.
A bit about me for the new folks:
I’ve been in the LC world now for about 20 years. I...
Hi,
Just completed a 4000km run over the last 7 days with my 1991 PZJ77. Mostly on highways and at speeds varying between 95 and 110km/h. I have an RTT and cargo carrier + 3 passengers.
All was well until today when we encountered warmer temperatures (A/C full on) and started climbing slightly...
Hey fellas, new to this but I’m having trouble with my nz new 12v 1991 pzj70 crusier.
After driving it around I park up at home and next day boom nothing, lights all still work, reds come on so I thought maybe starter so I knock it.. nothing! then bench test and it failed so I buy a new starter...
I am finally ready to sell the 1PZ. This was removed from my vehicle to make way for a 1HD-FT. That being said after driving with it for over a year I think that I would of kept it if I didn't already have the 1HD.
Engine: 1PZ from a 1991 PZJ77
Mileage: just under 290,000km
Voltage: 24V...
Howdy all - I bought a 1991 PZJ77 last summer up in Seattle, been lurking here awhile and finally posting. My phone died a while back, so my sweet pics of the 77 touring Saskatchewan are somewhere in the cloud. I'll either take new ones or figure out how to get em and post em shortly.
Anyway -...
Forgive the question that has likely been answered but I am unable to find which transmission (and how many splines) is fitted to a 1993 70 series 5 cyl 1PZ.
Mine took a dump yesterday with some horrid noises on deceleration and an inability to downshift to second gear. This failure happened...
SOLD
I have a 1PZ R151 combo here that I just removed from a 1 owner 91 PZJ75 because the new owner wanted a 1HZ in it.It has about 220 k km or about 135 K miles on it and runs very good.I took it for a 20 mile testdrive before I removed it to make sure there are no issues with it.
I want...
So, i have two trucks both with perfectly good running engines.
#1: 1PZ Diesel, turboed about 6 years ago, rarely gets driven. EGTs always kept below 1000. Just had the valves adjusted and fuel pump tweaked. about 160K KILOMETERS on it (100K miles),
- 1991 1PZ, 3.48L
- 5 Cyl diesel
- New...
Up for sale
1990 Toyota Land Cruiser with a 3.4l (1 PZ diesel) 5 cyl
150k miles and counting ( I drive it every day) Everything works, some rust on the body, frame is clean.
Only non JDM thing on this truck is a steering wheel.
Asking $13,500 OBO
I got me a 60 series so I got to sell this one...
Now selling the running engines!
1PZ engine sold 150K KM 1HZ SOLD
I'm (WRAPPING UP!) a body swap and a 12 volt conversion on my PZ77 from a LJ78 donor. Also going to part out a HZ 73.
Have most of the 73 and 78 series availible for parts. the LJ78 only had 49,000 Kilometers on it.
The 73 has...
Hi guys,
I have found a 92 70 series with a 1PZ in it with 150k miles. I"m looking for a 1FZ but those are impossible to find where I live. All 70s here are diesels.
I plan on using my LC as a daily driver and some light offroading. I will add a bull bar, larger tires and a winch.
Do you have...