40 series general tech and classifieds

[wngrog]

Ooops

 

[lenross1]

I had some Samuel Jackson beer last night. It was good....I have to go to Hinds County to get it.

http://www.youtube.com/watch?v=wSdWWSFmSk4

This aint the beer thread beeotch!

 

[MEMCruiser]

Anybody got pics of their speaker set up, especially the rear speaker set up.

Thanks.

 

[MScruiser]

Made the box out of MDF and covered it in vinyl.

 

[Bang Bang]

Nice set-up.

 

[MEMCruiser]

MS, thanks. Anybody seen speakers that are on roll bar? I thought that might work
after spending the summer on the boat and seeing boats that have that setup on the
wake board towers.

 

[Clutchee]

Found on eBay- wake board speakers and mounts.



s

 

[DSRTRDR]

some PO put the rear speaker boxes on the wheel wells - sorry, no pic, truck is 1500 miles away

obviously, I do not have jumpseats

 

[Domek]

Thanks guys. Yes fit the cage with the doors on so you can make sure you can close doors as well as roll the window down.

By gawd I had to read your previous statement several times and then the deciphering of the other folks to make sense of what you were talking about.

Glad we got that cleared out

 

[SHUSH]

https://forum.ih8mud.com/40-55-series-tech/11899-speaker-mounts-rollbar-fj40.html

 

[Bang Bang]

There is an older guy out of Texas (his name escapes me right now) who used some old KC light housings, mounted speakers inside of them, had light tabs welded to the cage and then mounted the light housings to the tabs. Wish I had taken pictures. Thought it was a cool idea.

 

[Bodean]

Lash has the KC light speaker set up.

 

[ntsaint]

Real time...

See attached 2 pics. I've dry fit it several times, but before I attach everything and tighten, this has to be the correct orientation for the new studs, right?

Sent from my iPhone using IH8MUD

 

[ntsaint]

And turns out holes on each end of the block are smaller. Do I need to find smaller studs for that or do bolts go there?

Sent from my iPhone using IH8MUD

 

[NOLAKS]

http://memphis.craigslist.org/cto/3173172532.html

way out of my range, but a nice example of a capable daily driver

 

[Bodean]

And turns out holes on each end of the block are smaller. Do I need to find smaller studs for that or do bolts go there?

Sent from my iPhone using IH8MUD

Bolts if I recall correctly.

 

[SHUSH]

http://memphis.craigslist.org/cto/3173172532.html

way out of my range, but a nice example of a capable daily driver

wow that is my dream 40 DD right there.......







mmmmm droooool......





ok lusting over...reality..I have a 100 series worth less than half that

 

[Sea Knight]

http://memphis.craigslist.org/cto/3173172532.html

way out of my range, but a nice example of a capable daily driver

Very nice. I wonder if that's 52K miles or 152K miles. Anyone know the truck?

 

[southff4]

http://memphis.craigslist.org/cto/3173172532.html

way out of my range, but a nice example of a capable daily driver

A friend of mine has meet the guy before and seen it in person. I think it came from Cleveland ms and still has the dealer sticker on it. I know we're he lives but have not had a chance to go see it yet. Said he was a nice guy.

 

[40's rock]

And turns out holes on each end of the block are smaller. Do I need to find smaller studs for that or do bolts go there?

Sent from my iPhone using IH8MUD

Bolts and they are a size down