My aftermarkets are in constant dust, dirt, dogs, and sun. I drop and restore the seats every day depending on my load out. No fading or fraying, 10 yrs at least. Can’t remember source but they’re black.
Build 1978 FJ40 Mustard Yellow - almost perfect thread.
- Thread starter jomelo
- Start date
Member Build Threads
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #683
At this rate you are gonna be bringing Mustard back in a week or so.
I have to find a good rust free tranny hump and send the ebrake cable to be made and then get the exhaust guy on my schedule but yeah. I’m rolling.
- Joined
- Jul 22, 2012
- Threads
- 638
- Messages
- 17,382
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
Keeping dash brake handle with the 60/70 rear drum parking brakes?
Yeah. @orangefj45 has a place you can send both ends and have a new one made. Waiting to get the axles in to measure. I’m assuming it will work. Be my first.
Working on the frame and underside of this tub.
Here is some after pressure washing but before I started really scrubbing
Frame first. Orange Zepp and a scrub brush then wash and wipe then apply rust converter. Likely won’t even need paint
This photo you can see treated and clean versus not
These are after the converter set up
Here is some after pressure washing but before I started really scrubbing
Frame first. Orange Zepp and a scrub brush then wash and wipe then apply rust converter. Likely won’t even need paint
This photo you can see treated and clean versus not
These are after the converter set up
Ill share the info when I do it. Stay tuned.
- Thread starter
- #693
Mud is dead on the weekends. But this is looking great.
How are you applying the Lizard skin?
- Thread starter
- #696
100 percent @wngrogI want to see what type of suit you wear when doing all that cleaning!
I’m for sure getting the cancers from all the stuff I huff. Don’t let them blame my cigars.I want to see what type of suit you wear when doing all that cleaning!
The only proper way is with the air gun they provide.
This took a gallon. I’ll let it sit a while and hit it with another gallon to make it nice and quiet.
This stuff is amazing. It’s not good for a bedliner. It’s rubberized but for undercoating I’ve found it to be fantastic. No bedliner has the heat and sound properties this stuff has. I remember when I sprayed it under Project Patina the floor at the gas pedal cooled almost 20 degrees.
- Thread starter
- #699
For anyone reading along…..we need one of these ASAP:
forum.ih8mud.com
Wanted - Mississippi: Transmission tunnel cover for 1978 FJ40
forum.ih8mud.com