washer

https://vintageteqparts.com/collections/everything-else-hardware-fsms-shop-manuals-special-teq-stuff/products/copy-of-12v-genuine-nippondenso-japan-spec-oem-toyota-rear-windshield-washer-reservoir-bag-bladder-w-pump-sub-harness-green-tint-hose-fj60-fj62-hj60-bj60-hj61-12v ( NEW PRODUCT RELEASE...

I'm looking for part 90215-09003 and apparently it's discontinued. Is there a suitable replacement, or can someone get some good photos at least? For the H55F, part is highlighted in this diagram

Reservoir is in great shape, pump runs strongly, no cracks, original cap snaps tightly in place. https://www.ebay.com/itm/134744835212?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=XWUprgkcTOe&sssrc=2524149&ssuid=XWUprgkcTOe&widget_ver=artemis&media=COPY

The story - I picked up a 1st gen Sequoia Limited with 220k for cheap. Diagnosis from the mechanic who looked at it said it was likely a head gasket. Oil was milky. I've always wanted to do a project like this so I pulled the trigger and started the engine tear-down. I've got the FSM for my year...

I've had this problem with the rear washer nozzles for a while now. It needs attention finally due to now living in an arear that's virtually dirt roads. After filling the washer bottle up, be driving and or stationary, (being on a slight incline) it starts to dribble out the rear and...

Hi Guys- We are about to cut tooling on our first Minitruck project, the Washer Bottle and Coolant Reservoir assemble. Wanted to gauge interest from this group as a gut check. We executed a bottle for the FJ60 group that was well received, so we have experience with these types of projects...

Does anyone know the name/part number for the clear plastic washer that goes behind the window cranks? Im pretty sure I've seen them on toyota website when searching for screws, etc, but I have no idea what words to punch into Google to find them again. Thanks

Hi everyone. Truck is lx570 2016 My Headlights washer doesn't work. I replaced the pump but it did not help, I can hear and feel with my hand how relay clicking. Is there any fuse for the pump? I removed the bumper just to replace the pump, it's really stupid way😤

FJ45LV LV first Generation Genuine NipponDenso PIO option Wiper Washer Bottle pump motor Technical Discussion and the Subsequent ones that came after it to… - California Mandate PIO option - or - DealerShip Installed too

Hello guys, I am attaching this diagram for 1HZ diesel element filter. Part number is 2333446010. This is actually a metal washer that holds the spring in place that's inside element filter body. I can not source this washer because no one has it in stock. I checked partsouq, amayama and many...

Good condition (pics to follow). Doesn’t leak. In Toyota bag; used. $20 shipped in the United States.

Removed from a 1983 US spec FJ60. Bottle was cracked. Washer pump is in excellent condition. The small nipple is well attached and not brittle. The rubber grommet is supple with no tears. The small filter screen is complete. I connected it to a 12v battery and it makes a lot of noise. The...

Anyone have a tip on how to and what to use to try and lube my washer reservoir motor? I managed to free it so now spins around under power, but squeaks a bit so want it to not burn out upon use. Or will washer fluid do it on use?

It seams the PO was a douchebag. let me rephrase he really was When somthing broke that is not critical he would bypass it When I got my Rig I filled the washer tank with good blue stuff every button i pushed I got water on the front window I read here and searched here all the posts...

This pertains to a 40 series Landcruiser. Having just done this and not having found a coherent post about how to do it (i.e., part here and part there and no part anyhere), I thought this might be helpful for others who knew as little as I did before I started. Adam, from Chula Vista, CA, and...

Nib winshield washer bottle, hoses, and hardware for late model 40 series. $25 plus the ride.

I did my injectors today and had a issue with removing 1 injector seal. I was able to get it out with a lot of effort but I may have caused some damage. I tried to split the washer with a flat head screwdriver to pull it out. I went slowly to try and not damage the surface I stopped before...

I'm attempting to service the front axle on my 79 FJ40 but I can't remove 2 of the 4 cone washers that secure the steering arm. I've tried tapping the housing with a hammer, heat with a torch and liquid wrench. I can't get them to break free and I can't get the steering arm to budge with them...

I have had a persistent washer fluid leak coming from my front left fender. Today I inspected through a few of the holes at the bottom of the bumper and it appears the leak is coming from a supply hose to the left headlight washer. What is the best way to access that hose? BTW - this link is...

Found answers in other forum area. Thanks!