transmission

I upgraded to the 5spd but you can get my old whiney 4 speed that probably needs a rebuild. Shifter included. About 200k miles on her, pulled working. Really loud in Top Gear™ and a little jammy getting into 2nd and reverse. Maybe they all are. Located in San Diego, CA she is $200 OBO plus...

SoCal From a gas powered 1991. I drove it and it shifted well, no slippage, no lurching, no creeping at idle and no leaks. Torque converter included. $500 firm for the Trans and Torque converter and I will deliver it to your shipper; you set up and pay for the shipping. Transfer Case quiet...

Hey Guys, I know there are lots of threads on replacing 62 transmissions...but I wanted to get more local feedback and advice from you all. This summer my transmission overheated several times, and then a few weeks ago it starting having trouble shifting up in gears. The guys at LCNW...

Hello, I'm having some problems with my fj62 transmission lately. It revs up high at shift points, and sometimes takes a while to shift into the appropriate gear. I've heard people say that the dipstick in this trans should be hot enough to almost burn you when you check it, but mine never gets...

I looked... but didn’t find the answer when I went down the rabbit hole of the Search... lots of good stuff out there but couldn’t seem to find the answer. I have a 1977 FJ40 with stock drivetrain (so from what I’ve read, I have an H42 4-speed)... my question is... and pardon my ignorance, my...

I just swapped in a new H55F into my 89 BJ70 with 3B motor. The H41 that was in it is still in good working condition, was rebuilt by PO ~30K kms ago (which I have papers for) and gave me no problems the couple of years I spent driving with it. It's my opinion that this probably isn't worth...

Hi, is the transmission crossmember the same between 100 and 80 series of Land Cruisers? Does the LX470 has the same crossmember? I just bought a new-to-me 1999 Land cruiser that has pretty rusty transmission crossmember. So, I am looking to expand my used part search. I am new to this forum...

So. First of all I'll say that I know I shouldn't have done it this way, I was hopped up on Turkey and didn't do my research. Reinstalling the transmission of my '79 FJ-40 we got the splines engaged (wiggled the flywheel and could see it turning the transmission). We then tightened the bolts...

I have a brand new Tranny to tcase bypass hose for sale. It measures 15 inches in length. Make me an offer if you’re interested. Thanks.

1999 LX470 I was driving on the highway one Sunday evening and this noise suddenly came about Recent work: - replaced both front CV axles - greased all the axle/shaft fittings. - replaced both front wheel bearings - drivers side CV axle seal was also replaced - the front diff was also...

Are A44D and A43D tranny’s compatible?? I have a tacoma A44D transmission that just went out. I found a A43D transmision at a junkyard with 80,000 miles. Are the A44D and A43D compatible even though the A44D is electronically controlled and A43D is controlled by throttle position and a...

Selling my spare A440F transmission (9K0153) with transfer case (9F1033). It's already on the pallet, ready to ship from 26505. I am also selling my stockpile of sweet parts. Getting out of the game fellas, this LC stuff is too brutal. I have a full 3FE smog assembly in close to new...

Looking for advice. Recurring issue where LC stalls out when coming off highway to first stop light. In sputters and then stalls. It will restart and run in Park or Neutral - but when engaged in Drive or Reverse it stalls. This has happened a number of times over the past couple years - but...

I have a B series H55 transmission/34mm transfer out of a 40 series. I pulled the top cover to use in another h55 setup so this one comes with a 60/70 series top cover. Transfer is manual shift front drive. This transmission drove beautifully and the shafts are all in good shape. I can get...

I just pulled my transfer-case out of my 97 to get gears and rebuilt. I was wondering if the seal around the transmission output shaft can be replaced without disassembly of transmission? Is it simply a press in seal? Thanks!

With the summer heat in full swing lately here in California I have been noticing my transmission temperatures go fairly high (monitored with Torque Pro, not towing). On level roads going about 30-40 mph I see 200 to 210 F (in D and 4) and over 220 to 240 F when going up mountain roads and good...

Greetings to all, 1989 FJ62 2nd gear is out and have found someone to do the rebuild..only we need the parts. To make things easier I'm hoping some of you have had to unfortunately rebuild your A440F tranny and would like all of your guidance on finding parts. Looking for OEM as much as...

1996 FZJ80 I noticed on a road trip a few weeks ago that after hard braking (almost enough to kick in ABS), the transmission seems to lag. I thought nothing of it until yesterday another Seattle idiot cut me off and i had to slam my brakes again to stop. The RPMs go up, then all of a sudden it...

Well, I tried to do my research on removing the transmission on my 1974 FJ40 and have sorta hit a wall. I went the route of using an engine hoist through passenger door and have removed everything necessary to drop the tranny. However, I'm not having any luck getting transmission to pull back at...

Hey Friends: I have a '93 FJ80 with >150K miles on it. She recently started spewing trans fluid from the bell housing when the engine is running. To me it seems as if a seal has gone bad that's letting the trans fuild get sucked into the bellhouse, but I'm not an expert on these things...