tranny

  1. E

    Value of 91 fj80 motor and tranny

    Have the opportunity to pick up an engine and tranny from a 91 for pretty cheap, says it ran but ecu is shot and had 200k miles. Pulled and replaced with cummins. Should I snag it? I've got a 92 that was not treated well before me and as I'm getting into it I'm finding a lot of little things...
  2. gerg

    For Sale  3b with 4spd tranny

    No relation. Has alternator and starter. It's a steal of a deal. Land cruiser 3b diesel engine
  3. Pike

    Zero Milage Engine and Tranny Rebuild 1FZ - Complete

    and.. she's alive! What an experience, long but rewarding! First start vid:
  4. MAO

    Wanted  2F dented side cover, drive shafts, 4speed tranny and tcase

    self explanatory tittle. let me know what you have. shipped to 92154
  5. NYIronPig

    3-speed transmission swap to a 4-speed?

    I am looking to improve my rig by upgrading my stock 3-speed tranny. I have looked at the 5-speed option, but it gets very expensive with all that is needed. Have read a lot that the 4-speed makes the FJ40 a nicer daily driver. Besides getting the H41 4-speed transmission and bell house, what...
  6. I

    Need input on which tranny solenoid this is.

    My shop has narrowed down the shifting issue to a bad solinoid. Can some one tell me which one this is. I have a pict of the one he says needs to be replaced but can't figure out how to upload the image. I can email you guys the pict if someone can send me their email address. Or a link...
  7. red66toy

    FJ62 tranny cooler line fitting size help

    Does anyone know the fitting size of the transmission cooler hardlines on the FJ62? They are bigger than the 14mm fittings that go into the radiator. Trying to finish up my aux cooler install and Want to order the correct AN- fitting adapter. Thanks for any help!
  8. Typeopos

    1995 Land cruiser Tranny Pan Help

    Please help. New here and recently inherited a 1995 Toyota Land Cruiser. Love the beast. One problem, the Tranny pan is leaking, very rusted. I am spinning my wheels (or actually not with no fluid) trying to find a pan. No one seems to have one. Anyone have any ideas, or maybe one laying around...
  9. thecrazygreek

    Wanted  Lord Jebus can I get a tranny hump!!! (4 speed)

    Been looking along time, might as well ask again.. Looking for a nice 4 speed (preferably with no drain hose holes) Transmission hump / cover. Needs to be in good shape with no rust through. Some pitting is okay... Will spend coin, with shipping to 97304. Please and thank you!!! I know...
  10. thewadejack

    H55F Planning/advice please :(

    Alright, I know I want a 5-speed. I want to go on road trips and not worry about it sitting in 4th gear for over 5 hours. I currently have the original 4-speed with a TBI swap in my cruiser I bought in November. One year from now I want to at least bought a 5-speed from one of the sites that...
  11. devo

    My tranny is buzzing me

    yes it does! I have a 1997. 250k miles When the transmission is shifted out of park into any gear, the fine vibration almost a buzz starts. I feel it in both shfters, the gas peddle, the seat of my pants and if I put my hand on the valve cover. Also when the tranny is cold, first start of...
  12. Captn Conch

    How functional is GM SM465 tranny W/ 3 speed transfer?

    I'm wanting to do this. But Just how usable is this granny gear when in 4 low? I had a '72 Chev 1 ton 2wd pickup and yes it was a real stump puller granny gear. I can only imagine being in 4 low with a granny gear in the Cruiser. Hi range granny, yes, but is it even viable in 4 low granny with...
  13. petrolhead

    SOLD  H42 tranny and transfer case, northern IN

    H42 tranny not H41-Came out of a USA 1983 FJ60 with 250K miles. Removed from truck in '07. Tranny and transfer shifted fine, no unusual noised, all ranges working. Very little wear on input shaft splines. 34mm idler shaft. Stored in heated garage since pulled. $400.
  14. petrolhead

    SOLD  H42 tranny and transfer case, northern IN.

    H42 tranny not H41-Came out of USA 1983 FJ60 with 250K miles. Removed from truck in '07. Tranny shifted fine, no unusual noises, no major leaks at that time. Shows very little wear on input shaft splines.Transfer shifted fine, all ranges engaged. Kept in a heated garage since pulled. $400.
  15. CuddlyEbola

    Best Mods for Prolonged Life?

    Hi all, I just registered recently, this community has an amazing amount of information, I'm seriously jealous of all the knowledge. I have a long way to go, never really modded cars at all, but hoping to get my feet wet soon. I just bought a 2005 GX 470 w/KDSS and 135k miles that I would like...
  16. cruiserjunktion

    For Sale  N Fla '97 A343F Tranny + xfer + Torque Converter

    Selling the trans, transfer and converter from a 96 lx450. $550 for all 181k. Good condition. Prefer local pickup, but will drop at fastenal for freight. Buyer makes arrangements. Rolling chassis also available.
  17. Charliehfzj58

    To rebuild tranny or not?

    I am currently in the process of rebuilding my motor. The motor should be out today along with the tranny and tcase. I cannot decide if I should rebuild the tranny or not, the truck has 275k and next summer I am planning on doing the transcontinental trail so I am leaning towards rebuilding it...
  18. Javelin

    Tranny / T case breather?

    Hey everyone. I have an 05 and started tackling my diff breather extensions. Is this the tranny and t case breather? Looks like they both are tied into one unit. Is this correct?
  19. HausePhoto

    Transfer case issues: rotten noises and won't stay in 4low

    Truck is a 1989 4runner, 22re, automatic. Lately, when accelerating quickly from a dead stop, I've been hearing an unpleasant groaning/grinding/rumbling sound from the vicinity of the transfer case, and when I put it in 4L it makes the same sound (but worse), and keeps popping out of 4L. I...
  20. Bodda

    Transmission Range Sensor?

    I can't seem to figure out this problem on my new LC. It's a '94 FZJ80, fuel injection, automatic. While in D, the RPM will not go above 2000. It stops right at 2000; hard ceiling. In P or N, the RPM behaves properly. There is no CEL. I went to a local shop a couple of days ago, and after a...
Top Bottom