series

Anybody have any good ideas on how and where to mount a Weboost Drive Reach Overland System on a stock Series 200?

Clamshell for an 80 series without cruise control. Prefer grey/black, but will take beige and I can do a respray.

Hi all, My 2011 LX was reclaimed by my wife to be a minivan for our one small child. It currently has 18’ LC stock wheels and is now driven just about exclusively around town and on highway. It gets driven through snow and occasionally deep snow 5-10x year, other than that just about all paved...

Brand new in box. Please check part number to make sure it fits your application. 85110-90K08 $300

I have a rear wiper arm for an 80 series for sale. The part # says it's 91-92 but I can confirm it'll fit 91-97. I bought it new 5 years ago so it's lightly used but still looks new and puts plenty of pressure on wiper/rear window. $40 OBO. Located in Salt Lake City, UT.

I am hoping the 200 LC owners here may have some thoughts on this issue i have with my 200 series 2008 landcruiser 4.5 L TD 350k on clock. when under load towing and generally when going up steep incline, foot flat on accelerator - car wont rev over 3000rpm. been to various mechanics inc...

I am hoping you 200 LC owners may have some thoughts on this issue i have with my 200 series 2008 landcruiser 4.5 L TD 350k on clock. when under load towing and generally when going up steep incline, foot flat on accelerator - car wont rev over 3000rpm. been to various mechanics inc Toyota...

My insulated hood liner is about shot after only 27 years. In our climate is it better to not have the liner? I'm sure I'll hear more engine noise but curious what others have done. Thanks.

Selling 1 Kanon molle window panel for the passenger rear inside of a 200 series. All necessary hardware included. Including the captive nuts to the headliner. $100 plus shipping, ready to go.

The solenoid on my 77 series pzj finally pooped itself and so searching around for a replacement it appears that the OEM one has been discontinued (85440-60160). Is there a decent aftermarket option for this part and/or what other solenoids can I run from other vehicles as a replacement?

Hello, I accidentally purchased 6 Toyota 42323-60010 - WASHER, CONE from Amayama in August 2023. What I needed was Toyota 42323-60030 - WASHER, CONE. These are the cone washers for the front hub I believe. I did not realize what the problem was when I tried to use one and it would not fit due...

Hey guys, Hoping you can help, I have a 1996 Land cruiser 80 series 24 valve. I've owned it for about a year now, when i purchased it it had high egts, puffed a lot of soot and was at 16psi boost but it had pretty solid power. However, recently I've turned down the fuel and its egts are still...

For sale on Bring A Trailer, 88,700+ Miles. Clean, unmolested.

Wanted to let everyone know we are currently running our black Friday sale from now through 12/1. We are using this black Friday to launch our 80 series bumpers. We have specialized in 100 series bumpers for the last few years and glad to enter the 80 series market. We specialize in doing custom...

This is a brand new bull bar bumper to suit all 70 series from 1985-present. Non-winch style. Perfect if you want to weld in a front receiver hitch to allow you to remove your winch and move to the back bumper or lock your winch away when not in use. $850 + ship

This is a brand new bull bar bumper to suit all 70 series from 1985-present. Non-winch style. Perfect if you want to weld in a front receiver hitch to allow you to remove your winch and move to the back bumper or lock it away when not in use. $850 + ship

Set of 5 OEM 18" wheels for 100 series or LX470 with 23 OEM lug nuts, 4 locking lug nuts and key. Some dirt, scratches, rock rash, but in decent shape overall with valve stems installed. Free for pickup, would rather not ship but will entertain on your dime.

Hello Island Cruisers I haven't posted here in the VIC Clubhouse before. Just curious if there's some Island 90 series KZJ / RZJ owners on MUD? Would be great to hear from you.

Hello! Newbie here and asking for a favour. As we are converting our beloved 75 series Troopcarrier we just finished laying out the marine carpet and insulation/ sound dampening. Ofcourse we forgot to mark down where the 4 anchoring bolt points are located and now the search for them unravels...

looking for 1 bearing hub for a 80 series Just the hub