rear

Looking for all 4 Marker lights with lenses

Ad was online for about 31 minutes. Was able to snag it. Local car. 1 owner. Bone stock. SUNROOF WORKS (well for today). Been looking for a 100 as a driver for a while (have a 07 LC in the stable for a long time, sub 15K miles). Everyone I looked around, either overpriced, modded to death, or...

So it's taken a while for me to locate and identify a metallic clank coming from the rear of the vehicle. I believe it is the sway bar end links. I'm thinking it's possible they didn't get tightened down enough or all the way when we did my OME Lift. I know I can tighten the nut at the top of...

Do you guys have any good indicator light sources?

I am looking for a rear blower motor or full assembly.

I know this is not ideal but I'm looking for a mild lift for the rear with a 1.5" ebay spacer. Unless anyone on here has some for sale or 1.5" lift springs. Any thoughts are appreciated. Thank you. I'm doing 5100s on the front and rear and will do a .75" front lift and 1.5" rear lift.

Need rear brown seat belts for early fj60. Just the outer two, i have the centers. All I really need are the outer male parts, but I'm willing to buy both male and female parts to get them. Price shipped to 78660 Thanks, Eric-

I get a few drops of coolant behind my rear drivers side tire when I do short low speed drives around town. I top up coolant once a month no more than a half pint. Hasn’t been much of a problem this summer but cool temps are coming. I took it to someone to check it out and under pressure the...

1965 FJ45 LPB is the model. Doing the first drum brake front right. Wheel cylinders rebuilt, new shoes, and springs. They were apart when I received it so going by manual. Seems both springs go behind shoes if I read correctly. The left wheel cylinder spring is very close to adjuster...

Been hemorrhaging money on this old Landcruiser lately, what's a little more? Vehicle is a 1995 80 series with ~350k miles. Currently has ARB front bumper, ComeUp 9.5 winch, and MetalTech sliders. Rear bumper is stock, no cargo drawers or anything at the moment. As for me, I've been building...

Well looks like I finally got hit, I was parked and the guy ran but got him tracked down. Is the damage bad enough to where it could have hurt the frame, and are there any other things I should check out? Also, can I use this as an opportunity to get ARB in the rear???;) Let me know the best...

Toyota 71930-90300 New old stock seatbelt, some very, very, very minor scuffs from storage. The protective coating is still on the button. This is no longer available from Toyota. $125 plus shipping, or pickup in Whitefish, MT

2004 LX470. Replaced my front axle bushings but still have an occasional clunk in the rear at stop and go at stoplight. Need advice on testing to find the culprit bushings.

Hi I bought a used 2005 LX470. It was not in a good shape. So, I performed the following works on it: Front: New Axles and hub flanges New globes for AHC New differential (yeah it was noisy and leaking) along with its bushing Tires Balancing job done recently Drive shaft lubricated with grease...

I was asked by a buddy in our Land Cruiser group to build a custom bumper for his 100 series. If anyone is interested, I have been “loosely” documenting the progress. I downloaded a 3D model of 100 series to use as reference and for communicating a design to the owner. I then designed the...

I bought these shocks for my 1994 FZJ75 pickup before realizing that the 10 leaf rear springs take the heavy duty shocks. Never installed. The number is a supersession; the original number was 48531-69385. Let's say $100 for the pair shipped (lower 48).

During the process of replacing shoes today, noticed severe scoring on inner surface (outer is smooth), symptoms are juddering felt through seat (not through steering wheel) … will service ebrake/handbrake whilst there … calipers are fine for now (sliders move smoothly) … anything else? New OEM...

Recently had the rear fenders patched using the panels made by Real Steel. We are running a 2-1/2" OME lift; 16" wheels and Yokohama Geolandar M/T (LT255/85R16). The clearance at the leading edge of the rear fenders looks close. What does the brain trust think? Thanks.

I’m picking up another 80 tomorrow and it’s rear bumper is cut to accommodate a trail gear. I much prefer the oem look, so will be going back to the stock bumper. Is there anywhere I can get a rear cross member? Does anyone on here have one or can point me in the right direction? Much love

Hello all, need some help! What are my options other than replacing the whole rear end housing due to the passenger rear shock mount rusted out. Basically, the bolt that holds the shock will not screw in because the hole threads dont exist anymore. SMH. Is there a replacement mount that can be...