Not seeing much about this. Would like to hear from folks who have a LS swapped 40 running the hockey puck LS motor mounts from advanced adaptors. Do they crush and crack with time? Looking for long term durability feedback.
I have a wild hair to start changing all my bushings and body mounts. Knocking out the shackles this weekend.
Question regarding body mounts...
Can these be installed while the body is mounted? Meaning do I need to have the body removed to swap them out?
I looked around and couldn't find an...
Righto my 80 probably has original body mounts fitted at the factory in 1992.
I know from observation that the front left one is pretty roasted, and I think the front right is the same.
What do people think based on these pics?
Front left:
Front right:
I know that it's a big job to re-do...
I just wanted to share my thoughts on this product by Solvefuntion. It is the tweeter mounts for the FJ80 that replaces the cover plate wear the mirror bolts are.
The quality of these are great. They are 3D printed and are solid. As you can see in the picture, the tweeters I have fit like a...
I did not take pictures of the process. But needless to say, step 1 is disassemble all the plastics (some partially) on the rear hatch and in the rear of the truck including popping down the headliner in the rear.
Its a chore to do.
I installed
2x National Luna Touch lights, white/Amber
1...
Used, good condition Front Runner quick mounts which enable you to quickly mount or dismount your RTT to your Front Runner or similar roof rack. Included are 4 quick release bindings. You may need other hardware, including appropriate tent channel pieces, which can be ordered from Front...
The best of both worlds!
I had previously mounted my Roofnest RTT directly on top of the cross bars of my Tradesman roof rack, but it just proved to be too tall. The tradesman roof rack already added almost 7” of height to top of the truck, and then to have the RTT on top of that just gave...
A run-of-the-mill rigid ditch light mount can’t compare to the near-infinite adjustability of our Massive single/dual ditch light mount kit. Full rotating design paired with slotted mounting holes allow for almost any desired orientation. Run a single ditch light pair or switch to quads in...
Hi guys, my first post etc etc
Anyway straight to the point, Im in the process of restoring my ‘83 FJ40. The current bumper set up is a bit of a mess and I’m wanting to take it back to stock. I have access to a full fabrication shop at work so have decided to manufacture my own mounts to save...
Hey everyone,
I've started my own little online shop with new parts coming out soon, mostly geared towards 100 series cruisers. I dubbed it Massive Metal Shop (wishful thinking). My goal is to put out high quality parts that people want and enjoy using, but I am tired of dealing with...
I've revitalised the front swaybar - swaybar itself has been fully repainted after physical cleanup with the three-step POR-15 process (with two coats of POR-15 gloss black not just one). Chassis links replaced with later ball-joint style instead of retaining the earlier link pin and bush style...
Interesting development. I just dropped in the stock rebuilt 2f into my 87’ FJ60 and noticed it is sitting crooked. At an angle. The motor mounts went in just as I took them out. It seems the front of the engine is sitting closer to the driver side which makes it noticeable. There’s only so much...
Hello All,
I used "search" and after not finding anything (yet) I figured I would not try to reinvent the wheel ask the forums.
I picked up a couple of affordable 6 LED light pods on Amazon and hope to mount them low on my ARB bull bar, I'd prefer low and behind the bar so they project low and...
hello I need a couple of the brackets where the jack rod mount on a fj40, they're sort of a pressure clip on for the rod. let me know if you've got any thanks
I think I finally figured out I reused the stock motor mounts when I converted it to a SBC. (Thanks who ever posted a picture of the stock mounts). For some reason, I can't remember what I used back then.
Anyway, I see the updated stock mount is square. Are there any issues with it as a...
Might have mentioned this in the past, but while doing Resomat install recently I had to take the front seats out, and I re-discovered the ugliness of the damaged front seat rear outer mounts. They were broken in previous ownership and it would be next to impossible to repair with new original...
Great shape
Using a different rack with mounts
6 of them
Its missing one bolt that attaches it to you roof of you 100 series
Awesome mounts
These are 150 for 6 of them
How about 110 shipped
Does anyone make front raised lower shock mounts or front lowered upper shock mounts to get all the travel from the shocks after adding front bump stop extensions.
Same question for the rear. Anyone make rear lowered upper shock mounts.
Looking into installing fresh body and transmission mounts on my rig. Hoping to reduce the decibels of noise inside so I don't have to wear earplugs...can anyone provide advice or pitfalls of my plan? There are aftermarket poly and stock rubber-is one material better than another? I'll probably...