Hello All,
I just got a 2012 GX 460 Premium and am having a unique issue with which I hope someone here could help. We recently took the car on several holiday road trips, I noticed that the headlights are pointed very low. I can only get about 50-75 feet of illumination on dark highways. I...
So if I push my headlight/turnsignal switch forward for high beam headlights it goes into high position but the headlights stay on lowbeam. if I pull the headlight turn signal switch away from the dash and towards the drivers seat inwards like if I was going from high to low beam and pull it...
1979 FJ40. My headlights are not working but other lights are. I could have hit something while working under the dash and speedometer. Or in the engine compartment carburetor area as well as radiator wiring or hose area. It’s been keeping me busy. Now this!!
Seems specific to just the headlights.
With the BF sales, I decided to finally upgrade headlights on my 3rd gen Surf (4Runner). Here is what I'll be getting:
1. Morimoto D2S Mini Stage III - it has a lens diameter of 78 mm and overall housing width of 102 mm.
2. On top of this I plan to use the Panamera shroud, which as an outer...
SoCal
For NON airbag models.
Complete switch with loom, easily replaces your master switch by removing steering wheel and 4 screws.
You know you need it when your brights don't work, or won't shut off, your turn signals are not getting power at the dash board side, or everything else in your...
I have a set of brand new headlights for a 1999 Toyota Tacoma. They came with my 01 Tacoma when I bought it but was given the wrong ones and could not return them to the dealership.
They are OEM Toyota and the P# is listed in the pictures for both Right & Left so please check that they are the...
I just purchased a set of DEPO glass lens headlights for our HDJ81 (Right hand drive) Land Cruiser to replace the original OEM headlights that are designed for right hand driving in Japan. Since I am in the states, we were getting flashed by other oncoming cars about 25% of the time and it was...
Received, from a friend, these Sonar lights. Trying to figure out the wiring and what I am missing. So far, I hooked up the turn signal first, it works, but I get the quick blink like a bulb is out. Also trying to figure out the wiring. Both lights are wired into one 3 way prong. The kit came...
I have the stock oem passenger side headlight, both parking lights, turn signal lights, and tail lamps for sale. The 1 headlight is the R side if you are inside the cruiser.
100 for the headlight
50 for the grille
50 for the corner signals as a pair
25 for the parking lights as a pair
25 for...
****SOLD****I dont need them so If you do here ya go. These are for a 97 land cruiser/lx450 only opened one headlight other is still sealed, never instaled 10/10
SOLD plus shipping CONUS please
I did a front end conversion on my 2002 Land Cruiser which updated it to the 2006-07 style. Absolutely not worth the effort, but I have some items in really good shape for sale.
1. Driver and passenger side headlights
2. Driver and passenger side turn signals
3. Grill
This stuff is in...
Removed from a '93 Land Cruiser. Fits 1991-1994 Landcruiser FJ80 and FZJ80. Functioning bulbs included, as well as the stock trim if you want it. $250 for both, shipped.
Bought a new to me 2000 LX470 as a family vehicle, the previous owner had done a headlight modification that wasn't obvious to me until i tried driving it at night for the first time...
it seems to have a decent cutoff but the light itself leaves alot to be desired and there's these two weird...
I have three headlights. One pair is OEM has damaged glass on both. Someone may want to use the housing for retrofitting purposes and another single aftermarket headlight that came with a slightly green tint to the plastic lenses but in great condition. Never installed. Bought two brand new OEM...
I have a pair of 1997 LX450 headlights. No cracks. Glass is good. Had regular halogen hi beam and some nice LED 9006 bulbs. They have heat sinks not fans. $250 shipped
Also have the grill. It's painted black and has a BH3d Teq emblem. It has a small cut on it to clear my winch clutch release...