I've never owned a vehicle with bench seats without headrests... I believe all 40's with the bench seats had lap belts only. Are most guys out there with the early style bench seats running lap belts only, or have you upgraded to a shoulder harness as well?
Thank you
This harness came originally in my 1993. No broken connectors , no heat damage where it passes nearby the egr tube, and no corroded connectors as you can see in the photo of the two round connectors that reside beneath the sometimes leaky pesky heater hose and are the ones to become rotted if...
hi all happy new year ! I am getting old and stupid at the same time , if my memory not failing me LX470 2006 must have a plug for a pigtail for tow controller am I correct?
Hoping someone has or can get a picture of the wiring harness connecting to the dome light over the second row. Previous owner had an aftermarket installed years ago and it no longer works. I want to install the original dome light back on, but it looks like the dome light harness was unplugged...
Found a couple threads that seemed to be asking the right questions but could find a definitive answer.
Trying in install ARB Intensity lights using ARB harness 3500520. Stuck at the high beam trigger wire tap.
I read that the high beams are negatively switched but I am unsure where / how to...
I've taken the ABS stuff out except the harness and wheel sensors. I'm planning to send the wheel sensors to a mud member. I'd like to remove all of the associated harnesses - like the ones that run along the front suspension arms. If you've done this job, can you share any tips or tricks?
Hey Buds,
The wiring harness (97 FZJ80) under the steering wheel has these 3 connectors?
Does anyone know what they are and what they could plugs into?
Thank you
I picked this up used and haven't put it to use as I sold my truck with the rear tire carrier.
https://maxtraxus.com/products/maxtrax-rear-wheel-harness
$165 when new. Let's say $40 + the ride.
·
FOR SALE - 3UZ ENGINE 5 SPEED :
$2950
1 x 3UZ 5 SPEED ENGINE - ALL WIRED UP AND RUNNING FOR AUTOMATIC APPLICATION
1 x ECU - Immobilizer has been bypassed and flashed.
1 x OEM Wiring harness system which is all wired up for automatic application - Just 3 wires to connect to make it start.
1 x...
Hi All,
Not been on here for a long time but finally purchased a RHD BJ40 for myself. I need a bit of advice please. The BJ has been restored (sort of) but the wiring is a mess. She really needs a new harness but not really knowing where to start, do I either fitting a kit or ask a shop do it...
So I pulled the rear wiring harness to clean it up and found an extra plug. It’s in the middle of the rear frame cross member, midway between the tail light pig tails. It is the same style plug as the rear side marker lights and the harness appears factory (in the pics I have started to pull...
A little back story, Truck was bought in California and now has 317,000 miles on it. Been a good performing vehicle, rust free but paint that was peeling.
A few years ago the 10amp fuse in the relay block in the engine compartment blew and I lost all interior lights and the radio. New fuse and...
red arc tow pro elite with toyota specific harness
what is shown is included. (does come with universal harness) you will need a vehicle specific button, I will include a 3d printed toyota small button i used
will fit with harness:
Toyota
4Runner
2003 - 2008
Toyota
4Runner
2009 - 2012
Toyota...
I'm looking for a supply of Male and female 6 pin tail light harness plugs and terminals.
I want to make a jump Harnes between the existing tail light plug, but with pug tails for a 4 and 7 pin trailer harness.
Can anyone reccomended a clsource for those connectors?
Thanks