fzj80

I've got some parts that I'm not going to use on my 80 series knuckles: 43233-60030 - Steel Shim Knuckle .20mm (I've got 2 of these) 43234-60020 - Steel Shim Knuckle .50mm (I've got 1 of these) 43235-60020 - Steel Shim Knuckle 1.0mm (I've got 2 of these) 43236-60020 - Steel Shim Knuckle...

I have both a 1995 and a 93 1fz and need to swap the engines, wiring is fried due to engine fire in the 95 and the 93 is rusting to bits so I’m putting the 93 engine into the 95 because it has less kms on the engine and a new clutch. Can’t really find a harness anywhere for the 95 so iv been...

Has anyone gone and seen this thing? Curious about build quality etc but the pics are tiny and seller has no real history about who did the work and when..

Hi everyone, I recently picked up a ‘95 FZJ80 that has been owned by a couple long time ‘mud members. I was looking for something for my teen daughters to drive. Mostly to work and school. The truck has a few quirks for sure. But I am hoping we can make this work! My vehicle search criteria...

Looking for a rear crossmember and a spare tire crossmember for a FZJ80. Anyone with an aftermarket bumper / gas tank have one or both lying around? Live in Virginia and would love to find something that doesn't need to be shipped, but glad to figure that out too. 51209-60111 51949-60010

As a long time RC nerd, I was delighted when my Secret Santa gifted me a 1:16 scale Land Cruiser, the WPL C54. In this thread I'll be sharing my initial impressions, what I've done with it so far, and a long term review. Admittedly, I'm a bit of an RC snob. In my teenage years I owned...

@matzell & BBRC crew: Initially was just going to DM this to you Rob, but thought this might be an interesting conversation for a BBRC thread. Wanted to see if folks would share some thoughts with me on this FZJ80 -- understanding of course you all very likely haven't actually seen this truck...

Doing the TorFab engine swap on my 91 80 Series and need the adapter from the A343 transmission and the 6 bolts that hold it to the transfer case (PN: 35015-60070). Shipped to 76103.

Loking for a tan steering wheel in decent condition. I know I can recover mine, but if someone has a decent one at a good price offering, I'd rather that. Need Tan FZJ80 steering wheel (dont need center airbag) Thanks. Mac

I have this FZJ80 sitting here that I bought a few years ago for the frame and axles , I haven't really done anything with it and it's getting to be in my way so I have 2 options . Option A pull the body off the frame and sell the body Option B sell the complete thing Let's focus on option A...

I have a 1994 FZJ80. I recently replaced the alternator with an Denso replacement from @cruiseroutfit. Still was having issues with a dead battery on occasion. I replaced the fusible link and installed a new battery tonight. I had the old one tested and it had gone bad. I had them test the...

Just got a ’97 FZJ80 and I’m going through the work of baselining and building confidence in the rig before taking it on longer trips from home. I’m new to the platform so really didn’t do good due diligence wrt common Fzj80 problems before purchase but so far seems nothing is terribly wrong...

1997 Toyota Land Crusier in Great Condition! 383k miles. Rebuilt engine with less than 12k miles. Rebuild included new all new cooling system (radiator, pump, hoses), all new lines for trans cooler, and power steering. New birfield joints, new front wheel bearings, new tie rod ends. Block...

Shifts well, no known issues. You are welcome to try out the transmission. $700, I can deliver the car locally to the Los Angeles area for you to remove and reload onto my trailer.

Looking for either the two front seats or a full set. Thanks! Due to the high cost of shipping, would be looking to pick up somewhere in the SE. I drive through FL, GA, SC, NC, and TN regularly.

I did some necessary maintenance and replaced all three belts and the idler pulley. But I had a broke alternator hold down bolt and I had two wires on the alternator connector fail. And, I rounded one of the flange nuts holding on the fan. Fun Times. I ordered a new three wire connector from...

Hey folks, so I've been working out the kinks on my recently purchased 80 series and the power antenna is the last thing that isn't working. I'm able to get it to extend and retract using alligator clips directly to the battery but nothing from the inside gets it going. When I first started...

Looking to purchase a set of OEM LX 450 suspension. This is for an FJ62 with FZJ80 suspension essentially. Ideally in the PNW but open to shipping. Thanks!!

Looking for a rear frame crossmember for an FZJ80 to replace my rusty one. Send pictures and price. Shipping to 07302.

After reading this post skit to #24. #2-#23 are full of confusing info as I was in the process of deciding what I was going to do. Sorry I'm starting this thread to document the parts, costs and work done, as fully as possible. Ill be adding info as I go along. Im doing all work myself except...