fj62

good running 3FE transmission was gone thru at 222,337 miles I won't say rust free but close, interior is good good tires a few paint blemishes and roof is faded all windows work seats are good I live on a dirt road $21,000 or offer

Selling my 60 to help fund some other projects. 328,000 miles on a strong running,de-smogged 2f motor. Month of manufacture is Feb. Compression numbers taken last year were all within 145-160. I wrote them down and will try to find it in my paperwork. Tons of work done in the ~3 years I have...

As the title suggests, my tie rods are currently stuck and unable to be aligned, I’m bringing it to another shop who may be able to free them but I want to be ready in case they need to be replaced. I’m familiar with the Japanese 555 brand ti-rod ends of which I’ll probably purchase also, but is...

Guy in my area is selling an FJ62. He wants $6,300. I think its worth $4,500. Thoughts? I test drove it today, brakes are soft, other than that is drives well and pretty much everything operates. The rust on the back is pretty bad, per picture. However in front of the rear driveshaft there isnt...

Complete FJ62 removed for &0-series axle swap. Normally I like to keep this stuff for shop projects but figured I’d offer it up Will sell complete as-is for $800 or separate the complete FJ40 disc conversion parts for $1000 (more cost due to time to remove them, degrease and package for...

I have a complete interior from a 1988 FJ62 in grey that I would like gone this week. Includes the front seats, bench seat with headrests, door cards and carpet in as seen condition. I believe I can find the hardware to mount the bench seat as well as the rear seatbelts. I really don’t want to...

Anyone have these in decent condition? Mine were a rusty mess and can't find them new. Hoping someone hung on to theirs after lifting their 62. Thanks all! EDIT - found it - 48802-60020.

Has anyone installed FJ60/62 exterior door handles and/or key locks on a 1st Gen 4Runner? The door handles looks similar between models, but not sure about the door locks. Granted, could be issues with the ignition, gas tank lid lock and rear tailgate lock to raise and lower the glass, but...

Looking for an AC evaporator coil for parts, doesn't need to work or can have leaks. Just the coil and connector fittings, don't need the housing. Shipping to 28461.

This was in my FJ62 and I modified to brackets to move it for my turbo. Would be good to modify for a diesel 40 or 60. No lid but could help with getting a new HZJ or HDJ80 lid to go with it. $30 plus shipping Sorry it’s muddy

Summit has some ARB "protection steps" but they're only good for up to a 50mm (2") lift per the installation instructions. Looking for a bar with steps that's not too busy. Prefer black and not crazy money. Thoughts and pics welcome...thanks in advance! HS

Alright, the time has come to move these parts onto their forever homes! This lot of parts came to us via a mud member who needed to unload them to help recover his costs for zinc plating them. As these were not our parts originally, it took a while to photograph and catalog them. We did our...

Came off of a running truck. $100 plus ship.

My lovely PO broke the front lower shock mounts off and welded bolts in place instead. Those have now broken on me. I’ve sourced a used set of spring plates, new u-bolts and shocks. Started working on it today and discovered the plates I got are slightly different than the OEM ones on the...

I see at least two product numbers for grey OEM FJ62 dash pad? Does one mean it has defroster cutouts already? Tia

Hey Everyone, The time has come for me seek professional help. I have a few issues with my FJ62 that have gone by the wayside with two kids and another one incoming this November. My FJ62 needs a new key cylinder on the steering column installed and has an exhaust leak at the exhaust manifold...

Located in Atlanta looking for a clean no rust FJ60 or 62. Please send me what you have for sale..

I’m not fussy or fancy but the ‘ole garbage bag window fix might need to be replaced by a better solution. I’ve searched and seen solutions for this if fully open, but haven’t come across one if the motor has died with the window open only 3-4 inches. Is there a way to easily get the window...

Just in time to show up and show out on the brand new 2023 Land Cruiser. Studies have found that 72.3% of all neck injuries in the United States were due to folks quickly turning and looking at FJ62 Land Cruisers as they pass by. Okay, maybe not but these things sure do turn heads! This baby has...

Frame off build for the prior owner by Cruiser Creations. Have receipts for over $58,000 invested into the build. It is the marriage of an FJ60 (front end and interior) and FJ62 (frame, tub, etc). If they had built it with a GM E-Rod crate motor, this would probably be a $58,000 wagon. They...