fj40

I put new shocks on from toyota in 2019. Just did a Redline 2.5” and want to find a new home for the stock shocks. great condition.

07 5.3 with black bear tune, 4l65, 4.1 Orion, 4.88, original Bobby longfield birfields and hub gears, rear full floater with longfield axels and hub gears, Alcan springs, arb front and rear with stainless lines, onboard engine driven air, all new wiring, new stainless brake lines throughout, 4x4...

Got a '73 FJ40 that is sagging in the rear. This is due to moving the gas tank to the rear, a heavy rear bumper, tire hanger and spare tire. Adding up all of this extra weight is roughly 350 pounds. I was looking at some of the aftermarket airbag kits and wondered if anyone had ever done...

WANTED: all for a 66. Windshield wipers, the visor piece that connects top to windshield, e brake cable, choke knob and last, but most all or just the center rubbed portion of an early dash. Thank you!

Selling a gas tank door, catch for the door, filler neck, and the surrounding metal off a 76 FJ40 $140 plus shipping for the gas tank door, filler neck and surrounding metal

I have a relative that repaired/restored Land Cruisers for a living. He has retired. This is the last 40 series he has. The body needs either the 3/4 tub repaired or replaced. Frame has some odd brackets from a prior owner that need cut off here n there. The 2f runs like a sewing machine. Fair...

Hi all, I recently purchased a 1966 Toyota fj40. Great truck, recently converted from a 68 bronco. I’ve wanted one for a long time. I guess first and foremost, is there a place to look for used parts? Someone cut a rectangle out of the dash ribbing and I’d like to replace that.

Long time FJ40 fan and now on my 2nd one. The last one I had was in high school 30 yrs ago. I am currently in the trenches of a complete nut and bolt resto-mod on my 1978. So far I have the frame sandblasted and painted , modified for power steering, rebuilt axles, knuckles, brakes, rear disc...

I purchased this truck out of Tucson from the original owner. It was amazingly complete and rust free. he had it stored under multiple layers of tarps to protect it from the weather. It did not have an engine or transmission so it made a perfect candidate. My goal was to have an original early...

I have three jump seats for sale. They came with all the parts I bought years ago. One with pull down support and two others with rubber stoppers. Asking $350 each. Reach out for different pics or more info. Bottom covers and old foam included if wanted.

I have a few FJ40 parts off of a 75'. Steering wheel, and center cap $175 obo plus shipping Horn button and wiring $30 plus shipping Tail light housings...SOLD Fuel door $ 15 plus shipping Message me for prices

Looking for a heater assembly for a 1984 FJ45. Looking for the complete assembly, blower, ductwork and interior heater box, water valve and pull

I got these from a 1965 FJ40. All are in good shape with no rust through. Fender lip pair $100 Tub top trim pair $125 sold, UPDATE, I do have another set for sale Dash, unmolested $250 sold Gas tank anchors $20 Vent $40 Door sill $25 Heater Blower inlet $45 Plus shipping Cheers KevO

New in box, rear door glass, $60 includes shipping

I currently have a 74 FJ40 with a 2f engine and 75 carb. Can I use the original setup on the 74 which consists of the wire on the harness side coming through the firewall (attached picture) or do I have to use the 1975 setup? Any help would be greatly appreciated. Thanks

Back and bottom metal panels extremely straight with no issues, dusty from storage, restore or use like is. $500 for the pair.

Just like the headline says… Set of late model fj40 doors… Little on the rough side… $850 USD Located in morro bay California 93442 USA Willing to assist with delivery. Photo album link https://www.icloud.com/sharedalbum/#B0P5M7GFPDV1ds Cheers, -Joe

Trying again to find a set of SOR rear sliding windows. I have 3 dogs, need some rear windows so each of them has a hole to stick his head out…..I’d even buy the whole top if some one is switching to a soft top…. Thanks

Anyone have a complete and original 1983 FJ40 tool kit available for sale?