carb

  1. socaloffroad

    For Sale  1963-1964 Original 1 Barrel Carb

    this is the info that one of the members here shared with me, I have no clue what its worth, but if you make me a fair offer you can take it off my hands, maybe some guys can help me to know whats a fair asking price? not trying to get rich guys, trying to clear out my garage and help some...
  2. MAK1

    1978 federal Aisan carburetor connections

    Hello Friends, I wanted to see if anyone could point me in the right direction here. I dont have a FSM and didnt see a pdf version for my year on the site. I'm trying to identify all of the connections on my carb. I have numbered them in the photos. Could someone tell me where I can get a...
  3. sigorama

    For Sale  Various FJ40 Carbs

    I have a variety of FJ40 carburetors for sale. See pics here: FJ Carbs - Google Drive PM or email me at SigfridsAndSons@gmail.com
  4. DougAustinTx

    Repair of '79 - '80 carb cooler fan controller circuit board

    My '79 40 didn't have the blower for the carb when I got it about 6 years ago. Until recently I was ignoring my hard-starts after the engine was warm and then sat for a while. I started reading the LONG threads about guys on MUD getting their carb coolers working and having much success with...
  5. Mandrew

    Carb issue after reinstalling (California type)

    *edit* I forgot to mention that this is a 1985 FJ60 I just recently cleaned out my carb thanks to the wonderful videos by Pinhead on YouTube. My truck was not passing smog, and after a mechanic refused to work on my carb until I took care of any potential vacuum issues, I am low on funds for...
  6. J

    FJ40 EGR to carb soft hose

    What type of hose should be used between EGR valve and carb(see yellow cap below)? Vacuum, fuel, etc. It appears to be around 5/8 diameter. Vehicle is 5/1977 FJ40. Original hose appears to be NLA. Thanks! Jeff
  7. J

    FJ 60 distributor and carb upgrade

    HEllo, Pretty new here. Have an 84 fj 60 that was desmogged by po. Has a holley carb. Nice little rig. 300k on it but pretty clean. Anyway, am looking at some possible upgrades for performance/ fuel economy. Not a mudder. Just a daily driver. Any thoughts as to brands , models etc would be...
  8. houstonfj40

    Quick carb question-slow idle cut off 2f

    Looking at a rebuild on carb, want to run truck while that’s being done, and have a back up. Looking at the CityRacer non US OEM and other aftermarket. For. Desmogged application. The others don’t have the Slow Idle cut off. Is it internally or is this something I don’t need in desmogged...
  9. blbuck12

    SOLD  Trollhole Carb

    trollhole carb, I got it off the classifieds here and used while I rebuilt and troubleshot my stock carb. $120 + shipping
  10. Krondor

    SD-40 Possible Production pt.2

    Hey guys. I started a thread on the SD40 carb production a while back on the FJ40 forum. I figured that I would give you guys an update and move the thread over to this group. So far I have contacted 2 different borosilicate glass manufacturers. (same stuff as pyrex) Both have no quoted the...
  11. erse

    Has anyone gone from one CARB approved enigne swap to a second?

    I have a new to me 88 with a vortec in it. Previously this truck had a 5.7 tbi set up. It was CARB approved with a sticker on the firewall. Per the seller this new set up was updated with CARB and approved and smogged. However the firewall sticker still refers to the old engine set up. Has...
  12. J

    FJ40 Carb/Accelerator Linkage

    I'm not sure I have my linkage connected correctly or I have a wrong part or two. It seems like the linkage to gas pedal rod is on a pretty good angle as well as the linkage to carb rod. It seems like the ball on the gas pedal would be better aligned if it were on the other side. It's a 5/1977...
  13. G

    1982 FJ40 Running too rich

    The Jeep was parked outside for 10 years about 5 miles from the ocean with a full tank of gas in it. When we drained the tank and inspected, it was clean!!! New Battery, Plugs, fuel filter, air filter, gas and oil, primed the fuel pump and it started right up, and idled fine and accelerates...
  14. blbuck12

    Unstable bowl level after rebuild

    So over the holidays I finally got around to rebuilding my stock aisan carb. Followed pinheads videos and the FSM and all was well with the world. Got everything together and it ran great for about a week. Then a piece of dirt/debri made it's way into the carb and plugged up one of the jets...
  15. B

    Desmogged '75 FJ40 vacuum routing help

    I know there are already some good threads on this general topic, but I haven't come across one that seems to cover my exact setup (if you happen to read this and know of an existing thread with answers to my questions, please post a link!). My FJ40 was desmogged by its previous owner, and all...
  16. Robbie G

    Looking for help sourcing harness, carb and gauge cluster for 1980 FJ40

    hey! I recently purchased a 1980 FJ40 that is in need of a few parts to get her on the road. Blair from Tommy's Automotive has been absolutely awesome at providing some guidance and help along the way. I've got most everything sources to get her roadworthy again, but I'm having challenges...
  17. blbuck12

    Replacement for carb screen/filter

    I'm starting the process of rebuilding my stock Aisan carb and the little filter/screen at the fuel inlet is toast. Are these available anywhere? or is there a suitable alternative? This is a big reason I stopped running the stock as it was constantly getting plugged when little bits of crud...
  18. alohamade

    For Sale  22R OEM CARB K&N Filter

    Aloha, I have a OEM 22R Carburator with K&N Filter that I pulled off my 1987 Xtra Cab. I went to a weber and have no use for this anymore. Asking $150
  19. C

    Wanted  Downey Headers (California)

    If any of you have some old California legal Downey headers laying around or know someone else who does, and wouldn't mind making a few extra bucks, I'm in the market. And by that I mean I really need some, since apparently a machine shop can't resurface exhaust headers because of the no. 1 and...
  20. chuckost

    Carb Rebuild

    I know, I should pay more attention it's been discussed before... I need someone to rebuild a california 1978 carburetor that is disassembled in a box. Don't ask any questions, I don't wish to discuss the details. Lol Anyone out there that does good work without laughing at me? (I couldn't do it!)
Back
Top Bottom