bolts

I'm swapping a disc brake front axle into my FJ45 and need new ubolts. Anyone have a set of 4 they're not needing? Thank you, Mike

This can't be right. Plates welded in to cover the tops of the body mount bolts. I'm guessing P.O. thought this was a good idea. Not really a mount either. Just a bolt with a chunk of rubber. How is this supposed to work?

Cross posting from the 20 series section https://forum.ih8mud.com/threads/early-f135-cam-rocker-bolts.1324507/

Working on reassembling the early (1960) F135 engine for the FJ28 “Lara” project and found one of the rockers cracked and some bolts stripped. The rockers are extra tall, almost 3”. I’m not sure how late they made the engines like that, but mid-60s at least were shorter. Bolts are about 5.75”...

I seem to recall going through this before when I had my upholstery done. The seat rail/seat pan bolts are odd size. They also anchor my seat belts. Toyota doesn’t stock it, the hardware store also doesn’t have it. In the photos the silver one is OEM Toyota 10mm x 30mm 1.25 pitch. The black ones...

looking for 90102-13009 and 90102-13010 bolts with 94141-41300 nuts

In the process of installing a new radiator and all the bolts are rusted/snapping. I’ve seen the metric overland kit that has all the bolts but is out of stock. Does anyone know of another source for the bolts besides the dealer?

It is quite common to use the most recent repair manual. When you tight the bearing cap bolts (B/2B/3B Diesel) you should be very careful with the manuals. For this family diesel engine Toyota published several manuals. Widely available at least 3 versions: 1977, Aug 1980, 1994. Friend of mine...

Pulled set of hinges from front doors, rear doors, and cargo. Includes all bolts minus one. Great shape. Taken off a 1986 FJ60 silver color. $100 plus shipping.

New owner of an LX470 with a stuck and leaking sunroof, currently starting the process of pulling the headliner to get at it and figure out what’s going on. I’ve hit an early and stupid roadblock, the damn assist grips in the second row, specifically the triangle shaped ones right behind the...

My belts started squeaking on startup and when I went to look I realized the lower bolt on the alternator is missing. While looking over the engine I also noticed that two of the three bolts holding the power steering reservoir are missing. I have a 1990 HZJ75 and currently located in Reno, NV...

Hi Guys! I am new here and this is my first post, so sorry if something is incorrect. My engine hanger (as in the picture) was removed during previous repairs and has not been mounted again. Recently I decided to screw it on. However, because the bolts are certainly not original (see photo) I...

Looking for mounting hardware for the original 100 Series roof racks. I had to remove mine and ended up having to drill out several bolts because of how rusted they were or had stripped heads.

Do we have a list of bolts that need re-tightening over time that may not be touched during routine maintenance? I’ve heard of people snugging up the valve gaskets bolts and checking the caliper bolts. Are there any other major ones out there?

Hi all, first post and new (to me) GX owner. 07, non-nav with great maintenance records and all. Rides great and all that, but was cleaning up some really small residual oil when I was underneath the truck today. Right on the main seal, not enough to make a drip, but noticed it wet when I wiped...

Hey all, long time no see!!! I'm bringing back my BJ44V back to life after a hibernation of 5 years. She has a 1982 3B upgrade (from a donor BJ42) that was put in there a year before she went to sleep. all running fine although the clutch made a squeecking sound when engaged. so I have decided...

Hello, anyone know the size of the bolts located at the front of the torsion bars? I'm going to need to repair the threads on one of those. Thanks

Ok, as I was trying to replace my 65 fj40 hood tiedowns, the real pain in the A** bottom bolts just got the best of me. Why make things so hard? It made me wonder....What are the most difficult parts you have had to replace on your cruiser? Pictures added because nobody likes a post without pics.

I suspect these two bolts may be the source of small annoying oil leak. Can someone tell me the purpose of these two bolts and if there is some type of O ring or sealant needed here? The blue oval are the two bolts.

Hi All, my engine block is missing the PS pump mounting hardware and I was wondering if anyone knew the part number for the stud that the PS bracket mounts to on the front of the engine block next to the water pump? The rest of the bolts and nut would be helpful too but the stud part number I...